Da beide Boxen Client und Server sind müsste ich ja nur noch das Verzeichnis nfs-test erstellen
NFS Testergebnisse
Wir haben aktuell ein Problem mit dem Board und arbeiten an der Lösung...
-
-
Du hast das Funktionsprinzip nicht verstanden. Das script muss auf der Box gestartet
werden auf der auch das Verzeichnis zum mounten erstellt wurde. Ausserdem muss die
IP-Adresse der anderen Box jeweils eingetragen werden.P.S. Verstehe aber nicht, warum du so einen Aufwand betreibst, wenn du nur 2 Dreamboxen
untereinander mountest. -
Nein es sind mitlerweile 4 Boxen 3x 800se und 8K
-
Mach bei allen die Parameter
soft,nolock,rsize=8192,wsize=8192
rein und gut ist.
-
Zitat
Original von Oldboke
Ich hab jetzt 30 eingestellt, aber 10-20 sollten auch reichen.
Ich warte ja immer noch auf einen kleinen Hinweis im Dreamboard, was es mit der auto.network auf sich hat, bzw ob da noch was kommt.Jetzt kann ich den Server der 7025 auch udp mounten.
Hallo,
ich habe auch die Probleme mit der Zeit. Wenn ich auf PVR gehe dann
kommen meistens die Zahnräder.Wo muß ich den Wert timeout=30 eingeben?
In der /etc/auto.network Datei?
So-->
Qrecord -fstype=nfs,rw,soft,nolock,rsize=8192,wsize=8192,timeout=30 192.168.1.21:/Qrecordings
Wenn ich folgendes eingebe
sieht die Ausgabe so aus
Code$Configured Mount Points: ------------------------ /usr/sbin/automount --timeout=1 --ghost /autofs file /etc/auto.hotplug /usr/sbin/automount --timeout=1 --ghost /media/net file /etc/auto.network $Active Mount Points: --------------------
und mit
sieht die Ausgabe so aus
Code
Alles anzeigenroot@dm8000:/tmp# mount rootfs on / type rootfs (rw) /dev/root on / type jffs2 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw) usbfs on /proc/bus/usb type usbfs (rw) /dev/mtdblock2 on /boot type jffs2 (ro) tmpfs on /var type tmpfs (rw) tmpfs on /tmp type tmpfs (rw) /dev/sda1 on /media/hdd type ext3 (rw,data=ordered) automount(pid855) on /autofs type autofs (rw,fd=4,pgrp=855,timeout=1,minproto=2,maxproto=4,indirect) automount(pid900) on /media/net type autofs (rw,fd=4,pgrp=900,timeout=1,minproto=2,maxproto=4,indirect) /dev/sdc1 on /media/cf type ext3 (rw,data=ordered)
Danke
-
Hier mal meine Ergebnisse:
Bitte um Durchsicht und was/wie kann man noch optimieren?
- NFS protokoll v2 v3 v4
- timeout
- evtl. an der Qnap ein anderes Dateisystem ext3 statt ext4 ?
oder Raid System ändern?
- andere Kabel benutzen CAT6e oder Cat7??Mein Wunsch wäre parallele Aufnahmen (min 2-3) und gleichzeitig
eine der Aufnahmen gleichzeitig per PVR starten und anschauenDas ging bei mir mal aber irgendwas hat sich geändert und seit dem
ruckelt es bei der Wiedergabe. Aber ich vermute das es an meinem
Devolo AV mini Dlan 200 Mbit/s liegt.Aber die Tests habe ich mal mit einem CAT5 Kabel durchgeführt!
Test mit NFS_Speedtest
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Kabel......................(CAT5 direkt verbunden)
DM8000..................(IP fix, automount, iCVS Image vom 04.02.2011)
Switch GS108T v1....(Jumbo Frame deaktiviert, keine weiteren Einstellungen, FW 3.0.4.10)
Qnap SS-439............(IP fix, MTU 1500, 1000Mbps fix, 3.4.0 Build 0212T, Raid-5, EXT4, 4xSeagate Momentus 5400.6 500GB (ST9500325AS))Test filesize=32
Results for write throughput:
89.478 Mbit/s with udp,async,wsize=8192
89.478 Mbit/s with udp,async,wsize=4096
89.478 Mbit/s with udp,async,wsize=32768
89.478 Mbit/s with udp,async,wsize=16384
89.478 Mbit/s with tcp,async,wsize=8192
89.478 Mbit/s with tcp,async,wsize=4096
89.478 Mbit/s with tcp,async,wsize=32768
89.478 Mbit/s with tcp,async,wsize=16384Results for read throughput:
134.217 Mbit/s with udp,async,rsize=16384
89.478 Mbit/s with udp,async,rsize=8192
89.478 Mbit/s with udp,async,rsize=4096
89.478 Mbit/s with udp,async,rsize=32768
89.478 Mbit/s with tcp,async,rsize=8192
89.478 Mbit/s with tcp,async,rsize=4096
89.478 Mbit/s with tcp,async,rsize=32768
89.478 Mbit/s with tcp,async,rsize=16384>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Kabel......................(CAT5 direkt verbunden)
DM8000..................(IP fix, automount, iCVS Image vom 04.02.2011)
Switch GS108T v1....(Jumbo Frame deaktiviert, keine weiteren Einstellungen, FW 3.0.4.10)
Qnap SS-439............(IP fix, MTU 1500, 1000Mbps fix, 3.4.0 Build 0212T, Raid-5, EXT4, 4xSeagate Momentus 5400.6 500GB (ST9500325AS))Test filesize=64
Results for write throughput:
89.478 Mbit/s with udp,async,wsize=8192
89.478 Mbit/s with udp,async,wsize=4096
89.478 Mbit/s with udp,async,wsize=32768
89.478 Mbit/s with udp,async,wsize=16384
89.478 Mbit/s with tcp,async,wsize=8192
89.478 Mbit/s with tcp,async,wsize=32768
89.478 Mbit/s with tcp,async,wsize=16384
76.695 Mbit/s with tcp,async,wsize=4096Results for read throughput:
89.478 Mbit/s with udp,async,rsize=8192
89.478 Mbit/s with udp,async,rsize=4096
89.478 Mbit/s with udp,async,rsize=32768
89.478 Mbit/s with udp,async,rsize=16384
89.478 Mbit/s with tcp,async,rsize=8192
89.478 Mbit/s with tcp,async,rsize=4096
89.478 Mbit/s with tcp,async,rsize=32768
89.478 Mbit/s with tcp,async,rsize=16384>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Kabel......................(CAT5 direkt verbunden)
DM8000..................(IP fix, automount, iCVS Image vom 04.02.2011)
Switch GS108T v1....(Jumbo Frame deaktiviert, keine weiteren Einstellungen, FW 3.0.4.10)
Qnap SS-439............(IP fix, MTU 1500, 1000Mbps fix, 3.4.0 Build 0212T, Raid-5, EXT4, 4xSeagate Momentus 5400.6 500GB (ST9500325AS))Test filesize=128
Results for write throughput:
97.612 Mbit/s with udp,async,wsize=16384
89.478 Mbit/s with udp,async,wsize=8192
89.478 Mbit/s with udp,async,wsize=4096
89.478 Mbit/s with udp,async,wsize=32768
89.478 Mbit/s with tcp,async,wsize=32768
89.478 Mbit/s with tcp,async,wsize=16384
82.595 Mbit/s with tcp,async,wsize=8192
82.595 Mbit/s with tcp,async,wsize=4096Results for read throughput:
97.612 Mbit/s with udp,async,rsize=8192
97.612 Mbit/s with udp,async,rsize=32768
97.612 Mbit/s with tcp,async,rsize=8192
89.478 Mbit/s with udp,async,rsize=4096
89.478 Mbit/s with udp,async,rsize=16384
89.478 Mbit/s with tcp,async,rsize=4096
89.478 Mbit/s with tcp,async,rsize=32768
89.478 Mbit/s with tcp,async,rsize=16384>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Dann der Test mit netztest
komischer weise habe ich immer andere Werte bekommen
root@dm8000:/tmp# /tmp/netztest 192.168.1.21 /Qrecordings /media/nfs short
.............udp/write..... udp/read......tcp/write.........tcp/read
4096........ 87381........87381...........87381...........87381
8192........ 87381........87381...........87381...........87381
16384....... 87381........87381...........87381...........104857
32768....... 87381........87381...........87381...........104857root@dm8000:/tmp# /tmp/netztest 192.168.1.21 /Qrecordings /media/net/Qrecord short
.............udp/write..... udp/read......tcp/write.........tcp/read
4096........87381........ 104857...........87381..........87381
8192........87381 ........104857...........87381..........87381
16384......87381........ 104857...........87381..........87381
32768......87381........ 104857...........87381..........87381Könnte ich diese Optionen auch direkt für die auto.network übernehmen??
192.168.1.21:/Qrecordings /media/nfs nfs rw,vers=3,rsize=4096,wsize=4096,soft,nolock,proto=tcp,timeo=70,retrans=3,sec=sys,addr=192.168.1.21 0 0
192.168.1.21:/Qrecordings /media/nfs nfs rw,vers=3,rsize=8192,wsize=8192,soft,nolock,proto=udp,timeo=7,retrans=3,sec=sys,addr=192.168.1.21 0 0
EDIT:
Habe soeben mal 6 HD Sender gleichzeitig aufgenommen
und über PVR habe ich auch noch die Sendungen parallel
angeschaut
Beim vorwärts springen dauert es zwar einen Moment aber
beim normalen Abspielen ist alles okJetzt muß ich da mit dem DLan 200 Mbit/s auch noch hinbekommen
hier die Ergebnisse mit dem DLan
DLan (unten an der Leiste, oben an der Dose)
DM8000 (IP fix, automount, iCVS Image vom 04.02.2011)
Switch GS108T v1 (Jumbo Frame deaktiviert, keine weiteren Einstellungen, FW 3.0.4.10)
Qnap SS-439 (IP fix, MTU 1500, 1000Mbps fix, 3.4.0 Build 0212T, Raid-5, EXT4,
4xSeagate Momentus 5400.6 500GB (ST9500325AS))Test filesize=64
Results for write throughput:
38.347 Mbit/s with udp,async,wsize=16384
35.791 Mbit/s with udp,async,wsize=8192
35.791 Mbit/s with udp,async,wsize=4096
35.791 Mbit/s with udp,async,wsize=32768
35.791 Mbit/s with tcp,async,wsize=32768
35.791 Mbit/s with tcp,async,wsize=16384
33.554 Mbit/s with tcp,async,wsize=8192
31.580 Mbit/s with tcp,async,wsize=4096Results for read throughput:
38.347 Mbit/s with udp,async,rsize=8192
38.347 Mbit/s with udp,async,rsize=32768
35.791 Mbit/s with udp,async,rsize=4096
35.791 Mbit/s with udp,async,rsize=16384
33.554 Mbit/s with tcp,async,rsize=8192
33.554 Mbit/s with tcp,async,rsize=32768
33.554 Mbit/s with tcp,async,rsize=16384
29.826 Mbit/s with tcp,async,rsize=4096root@dm8000:/tmp# /tmp/netztest 192.168.1.21 /Qrecordings /media/nfs short
.............udp/write..... udp/read......tcp/write.........tcp/read
4096.......2768...........32768...........29127...........30840
8192.......4952...........34952...........32768...........32768
16384.....34952.........37449...........34952...........34952
32768.....37449.........37449...........32768...........34952Gruß
-
-
Wenn ich diesen Script auf der 8000 laufen lassen möchte muss ich doch nur ein Freigabeordner auf qnap anlegen u. in der fstab diesen mounten u. dann den Script anpassen oder?
-
...das Script mountet und umountet selbst - sonst würde es ja keinen Sinn machen.
Du kannst eine bestehende NFS-Freigabe auf Deinem NAS verwenden - der Mountpunkt auf der Dream muss existieren (einfach ein nicht genutztes Verzeichnis unter /media/xx verwenden.
-
ok danke
-
..und wenn es mit dem Script hapert......NFS Testplugin
-
ich kriegs auch nicht mehr hin, damals lief es aber schonmal
#!/bin/sh
# IP of your NFS server
serverip=192.168.0.1
# exported directory on your NFS server
exportdir=/var/media/ftp/uStor02/Filme
# mount point on dbox
dboxmountpoint="/media/net/FRITZE"
...kommt aber immer FAILURE
root@dm8000:/usr/script# nfstest.sh
Measuring NFS throughput...
Mount options: udp, async, wsize=4096
writing 64 MBytes...
Failure
Mount options: udp, async, rsize=4096
reading 64 MBytes...
FailureMount options: tcp, async, wsize=4096
writing 64 MBytes...
Failure
Mount options: tcp, async, rsize=4096
reading 64 MBytes...
FailureMount options: udp, async, wsize=8192
writing 64 MBytes...
Failure
Mount options: udp, async, rsize=8192
reading 64 MBytes...
FailureMount options: tcp, async, wsize=8192
writing 64 MBytes...
Failure
Mount options: tcp, async, rsize=8192
reading 64 MBytes...
FailureMount options: udp, async, wsize=16384
writing 64 MBytes...
Failure
Mount options: udp, async, rsize=16384
reading 64 MBytes...
FailureMount options: tcp, async, wsize=16384
writing 64 MBytes...
Failure
Mount options: tcp, async, rsize=16384
reading 64 MBytes...
FailureMount options: udp, async, wsize=32768
writing 64 MBytes...
Failure
Mount options: udp, async, rsize=32768
reading 64 MBytes...
FailureMount options: tcp, async, wsize=32768
writing 64 MBytes...
Failure
Mount options: tcp, async, rsize=32768
reading 64 MBytes...
FailureResults for write throughput:
Failure with udp,async,wsize=8192
Failure with udp,async,wsize=4096
Failure with udp,async,wsize=32768
Failure with udp,async,wsize=16384
Failure with tcp,async,wsize=8192
Failure with tcp,async,wsize=4096
Failure with tcp,async,wsize=32768
Failure with tcp,async,wsize=16384Results for read throughput:
Failure with udp,async,rsize=8192
Failure with udp,async,rsize=4096
Failure with udp,async,rsize=32768
Failure with udp,async,rsize=16384
Failure with tcp,async,rsize=8192
Failure with tcp,async,rsize=4096
Failure with tcp,async,rsize=32768
Failure with tcp,async,rsize=16384root@dm8000:/usr/script#
-
von dm800a zu dm800b hab ich folgende werte:
Results for write throughput:
38.347 Mbit/s with udp,async,wsize=32768
38.347 Mbit/s with tcp,async,wsize=32768
35.791 Mbit/s with udp,async,wsize=16384
31.580 Mbit/s with tcp,async,wsize=16384
26.843 Mbit/s with udp,async,wsize=8192
23.342 Mbit/s with tcp,async,wsize=8192
17.318 Mbit/s with udp,async,wsize=4096
17.318 Mbit/s with tcp,async,wsize=4096Results for read throughput:
67.108 Mbit/s with udp,async,rsize=32768
53.687 Mbit/s with udp,async,rsize=16384
44.739 Mbit/s with udp,async,rsize=8192
41.297 Mbit/s with tcp,async,rsize=32768
38.347 Mbit/s with tcp,async,rsize=16384
31.580 Mbit/s with tcp,async,rsize=8192
28.256 Mbit/s with udp,async,rsize=4096
22.369 Mbit/s with tcp,async,rsize=4096selbst mit dm800 -fstype=nfs,rw,udp,soft,nolock,rsize=32768,wsize=32768 192.168.1.4:/hdd habe ich wenn ich die live-aufnahme von dm800a auf dm800b schauen möchte ein ruckelkonzert. schaue ich eine alte aufnahme während eine neue läuft kommt es zu keinen problemem.
an was könnte das denn noch liegen?gruß benni
-
..sehr wahrscheinlich am zu lahmen Prozessor der 800er.
Lass den Test doch spaßeshalber mal während einer (HD-)Aufnahme laufen..
-
Hallo zusammen,
ich hab das Script auch bei mir laufen lassen weil bei mir Filme in HD extrem ruckeln.
Kurze Übersicht:
Mount
NAS -fstype=nfs,rw,soft,nolock,tcp,rsize=131072,wsize=131072 xxx.xxx.2.xxx:/Qmultimedia
mit TCP oder udpFritzbox 7390
QNap 219p
DM 8000Jumbo Frame Einstellungen (MTU)
mal mit 1500 /9000Hab einiges schon versucht hab aber immer ein ähnliches Ergebnis. Jetzt weiss ich nicht mehr woran es liegen kann,
wenn ich mein Ergebnis mit dem von anderen vergleiche schneide ich nicht so gut ab. Hat jemand ne Idee oder hinweis woran es liegen kann?Results for write throughput:
20.648 Mbit/s with udp,async,wsize=4096
18.512 Mbit/s with tcp,async,wsize=4096
17.318 Mbit/s with udp,async,wsize=32768
16.268 Mbit/s with tcp,async,wsize=32768
15.790 Mbit/s with tcp,async,wsize=16384
14.913 Mbit/s with tcp,async,wsize=8192
13.765 Mbit/s with udp,async,wsize=8192
13.765 Mbit/s with udp,async,wsize=16384Results for read throughput:
20.648 Mbit/s with tcp,async,rsize=32768
19.173 Mbit/s with tcp,async,rsize=8192
19.173 Mbit/s with tcp,async,rsize=4096
18.512 Mbit/s with tcp,async,rsize=16384
Failure with udp,async,rsize=8192
Failure with udp,async,rsize=4096
Failure with udp,async,rsize=32768
Failure with udp,async,rsize=16384Danke
-
du weisst nicht woran es liegen kann?
schau mal genau bei dir wird desto höher die r/wsize wird die geschwindigeit langsamer und wenn du dann in der auto.network einen noch höheren wert einträgst dann wird das garnicht mehr laufen
jumbo frames bringen überhaupt nix sind sogar kontraproduktiv die box kann kein gbit also ist das die schlechteste einstellung die man machen kann...
rsize=8192,wsize=8192 ist lt. deinen werten das maximum...
was für qnap untypisch ist meines schafft es die 100mbit der dreambox komplett auszureizen - also irgendwo ist da ein fehler vergraben (router einstellungen kontrollieren)...
p.s.: du verwendest aber kein wlan oder?
-
Ich hatte mir auch schon gedacht das die Dream das ganz vielleicht daran liegt das die Verbindung über wlan geht. Deswegen hab ich das wlan deaktiviert.
Ich mein am Anfang waren die Werte auch auf rsize=8192, wsize=8192 eingestellt lief aber auch nicht wesentlich besser. Bin mir jetzt aber auch nicht 100%ig sicher.
Ich werd wenn ich wieder zu Hause bin mal die rsize, wsize und Jumbo Frames werte runter setzen. Mal sehen wie die Werte dann aussehen.
Im Router sollte alles i. O. sein da läuft nichts auf Energiesparmodus oder so.
Ich werd nachher dann nochmal mein Ergebnis zeigen.
Gruß
-
Okay jetzt sieht's so aus:
NAS -fstype=nfs,rw,soft,nolock,tcp,rsize=8192,wsize=8192 xxx.xxx.x.xx:/Qmultimedia
und Jumbo Frames auf 1500.
Results for write throughput:
89.478 Mbit/s with udp,async,wsize=8192
89.478 Mbit/s with udp,async,wsize=32768
76.695 Mbit/s with udp,async,wsize=4096
76.695 Mbit/s with udp,async,wsize=16384
76.695 Mbit/s with tcp,async,wsize=8192
76.695 Mbit/s with tcp,async,wsize=32768
76.695 Mbit/s with tcp,async,wsize=16384
67.108 Mbit/s with tcp,async,wsize=4096Results for read throughput:
89.478 Mbit/s with tcp,async,rsize=8192
89.478 Mbit/s with tcp,async,rsize=32768
89.478 Mbit/s with tcp,async,rsize=16384
76.695 Mbit/s with tcp,async,rsize=4096
15.790 Mbit/s with udp,async,rsize=4096
15.790 Mbit/s with udp,async,rsize=16384
15.339 Mbit/s with udp,async,rsize=8192
15.339 Mbit/s with udp,async,rsize=32768Sieht doch garnicht so schlecht aus, oder?
Ich schau jetzt mal ob es noch ruckelt.Danke schon mal.
-
Zitat
Original von Nick76
NAS -fstype=nfs,rw,soft,nolock,tcp,rsize=8192,wsize=8192 xxx.xxx.x.xx:/QmultimediaNur mal so als Info , TCP mit anzugeben bringt nichts da es per se Standard ist , wenn dann muss in seltenen Fällen expliziet UDP angegeben werden
-
der test hatte ich mal durchgelaufen
aber ganze filme kopieren ist wohl eindeutigermit fstab mount
E2 receiver
10.0.0.101:/Multimedia on /media/hdd type nfs (rw,vers=3,rsize=131072,wsize=131072,hard,nolock,proto=tcp,timeo=70,retrans=3,sec=sys,addr=10.0.0.101)
PC openSUSE 11.4
TS-239:/Multimedia on /mnt/TS-239_Qmultimedia type nfs (rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=10.0.0.101,mountvers=3,mountport=57210,mountproto=udp,local_lock=none,addr=10.0.0.101)der film 20110705 - Mankells Wallander - Das Gespenst.ts 3,5 GB in 40 sekunden = nahezu 87MiB/s auf PC kopiert ergibt andere werte als des NFS-speedtest.
(nochmal => LAN netgear GS105 mit NAS1000Mbit und PC1000Mbit und E2-receiver 100Mbit)
ich sollte mal mit nfsver=4 schauen.
wenn man aber cifs/samba benutzt hat ma auch soviel zeit für screenshot
anbei weniger als 1/4 der throughput von NFS