IPCamViewer for Enigma2

Zitat

Original von fab
Hab es gerade getestet. Wenn ich nun IPCamViewer starte kommen die Zahnräder und nichts geht mehr

Meine Config sieht nun so aus:
{command}{wansview.up}{/decoder_control.cgi?command=0&onestep=1}
{command}{wansview.down}{/decoder_control.cgi?command=2&onestep=1}
{command}{wansview.left}{/decoder_control.cgi?command=4&onestep=1}
{command}{wansview.right}{/decoder_control.cgi?command=6&onestep=1}
{command}{wansviewstartvertpan}{/decoder_control.cgi?command=26}
{command}{wansview.stopvertpan}{/decoder_control.cgi?command=1}
{command}{wansview.starthorpan}{/decoder_control.cgi?command=28}
{command}{wansview.stophorpan}{/decoder_control.cgi?command=1}
{command}{wansview.gotohome}{/decoder_control.cgi?command=25}
{command}{wansview.snapshot}{/snapshot.cgi?user=XXXXX&pwd=XXXXX}
{command}{wansview.protocol}{http://}
{camera}{192.168.1.5:80}{wansview}{Zimmer}{XXXX}{XXXXX}

Alles anzeigen

Live video geht nicht.Es gehen nur bildaufnahmen.Du mußt es in etwa so ändern wie oben.

Zitat

Original von sentinel1

Live video geht nicht.Es gehen nur bildaufnahmen.Du mußt es in etwa so ändern wie oben.

Hatte es schon bemerkt und dadurch zum laufen gebracht. Trotzdem danke. Spätestens jetzt wäre es durch deine hilfe gelaufen

jetzt hab ich im Menü etwas geändert und nun bekomm ich beim Start von IPCamViewer immer einen crash:

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++, size_w=1280; size_h=720; space=0, fourByThree_w=960, invisible_h=-240
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++, size_w=1280; size_h=720; space=0, fourByThree_w=960, invisible_w =320
+++++++++++++++++++++++++++++++++++ startWithPIP=False
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++, size_w=1280; size_h=760; space=0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ recording
Directory=/media/hdd/IPCamViewer
Screen <class 'Plugins.Extensions.IPCamViewer.plugin.ViewCamImage'>((), {}): <type 'exceptions.AttributeError'>
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 246, in create
return screen(self, *arguments, **kwargs)
File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 276, in __init__
AttributeError: 'ViewCamImage' object has no attribute 'scrPosX'
[InfoBarPlugins.execQuick] src: IPCamViewer 'NoneType' object has no attribute 'isTmp'
stopService
[eDVBCAService] free slot 0 demux 3 for service 1:0:1:2C2E:251C:FBFF:820000:0:0:0:
[eDVBCAService] free service 1:0:1:2C2E:251C:FBFF:820000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
[CrashlogAutoSubmit] - autostart
(exit code 5)
]]>
</enigma2crashlog>
<pythonMD5sum>
<![CDATA[

Ich glaub bei den rot markierten liegt das problem. Seitdem ich das geändert habe kommt der Crash! Aber wie bekomm ich das wieder auf true? Mit neuinstallieren geht das nicht.

Hi Shumifan50 and thanks for your great realese
In your thread, you ask if somebody try your software on a vu+duo and yes, i try it but unfortunately the soft doesn't start and crash my enigma2
Do you think a wrong config file can stop the start of ipcamviewer ?
My camera is a Tenvis cam JPT3815.
I hope you can help me.
Thanks for your time.
Karl

Re hi Shumifan50,
so, i've posted my question after trying hours and hours, but after that, i've tried to put your new driver of this thread and enigma stop to crash but the window cam closed immediatly so i've changed my command line and YYEESSS i've got the picture !!!
thanks a lot for your software

Karl

Zitat

Original von fab

Hatte es schon bemerkt und dadurch zum laufen gebracht. Trotzdem danke. Spätestens jetzt wäre es durch deine hilfe gelaufen

{command}{Levelone.snapshot}{/img/snapshot.cgi}
{command}{Levelone.protocol}{http://}
{camera}{192.168.178.**}{Levelone}{Ort}{Username}{Password}

ev mal mur die 3 Zeilen eingeben und dann mal ohne Usernamen u. Password

Zitat

Original von otto19

{command}{Levelone.snapshot}{/img/snapshot.cgi}
{command}{Levelone.protocol}{http://}
{camera}{192.168.178.**}{Levelone}{Ort}{Username}{Password}

ev mal mur die 3 Zeilen eingeben und dann mal ohne Usernamen u. Password

Alles anzeigen

Beitrag komplett gelesen? Wurde schon gelöst

Zitat

Original von shumifan50
seren2:
Read the thread. Read the manual.
Make it work from a browser first then try to make it work from IPCamViewer.

when I put following link to the browser, it works

http://192.168.178.xx/control/userimage.html.

what should I do now?

thx in advance

Zitat

http://192.168.178.xx/control/userimage.html

That still looks like the HTML control page - you need the URL that just requests a single .jpg image. You are getting closer to the required url. If you view the page source you should find the ul.

this one maybe ?

http://192.168.178.XX/record/current.jpg

when I put that one in browser, I can see the current picture on my t24.

what is the next step, please,

Your help is really appreciated:-)
thx

Do you see a single picture or is t continually updating?

Zitat

Original von shumifan50
Do you see a single picture or is t continually updating?

just a single picture.

I'd recommend to use the camoFS plugin.

Mamba

Zitat

Original von mamba0815
I'd recommend to use the camoFS plugin.

Mamba

Mamba, also a special thanks to you. as per your recommend, camoFSis already in use but I want also double check IPCamViewer to compare those two different plugs and decide to implement one of these in future.

Ah ... ok. Understood.

Edit the following 3 lines in IPCamViewer.conf

{command}{Levelone.snapshot}{/record/current.jpg}
{command}{Levelone.protocol}{http://}
{camera}{192.168.178.**}{Levelone}{Ort}{Username}{Password}

Howzit Shumifan50,

I've been trying to get your plugin (enigma2-plugin-extensions-IPCamViewer_20 11-01-10_mipsel.zip) to work on my DB 800se together with my Geovision GV800 DVR card (not an IP camera) with 4 cameras attached.

To accommodate for GV800 DVR not displaying jpeg feeds using their 8.5 software and windows 7,

I installed Ubuntu 11.10 32bit Desktop with zoneminder, getting zoneminder to work for GV800 is a pretty tough task on it's own but that's done now and with some other settings to zoneminder I can now see a constantly updating jpeg feed on:

http://192.168.1.120/cgi-bin/nph-zms?mode=jpeg&monitor=7&user=admin&pass=admin

When I launch the plugin with my config the spinner just keeps spinning with the below config:

{command}{foscam.snapshot}{/cgi-bin/nph-zms?mode=jpeg&monitor=3&user=admin&pass=admin}
{command}{foscam.protocol}{http://}
{command}{foscam2.snapshot}{/cgi-bin/nph-zms?mode=jpeg&monitor=7&user=admin&pass=admin}
{command}{foscam2.protocol}{http://}
{camera}{192.168.1.120}{foscam}{Kitchen}{admin}{admin}
{camera}{192.168.1.120}{foscam}{Lounge}{admin}{admin}

I tried a few other configs none worked.

Do you think it is possible to use your plugin to display my jpeg feed?

The URL must NOT be a constantly updating jpg stream, it must provide a single jpg mage for each request.

Hi Shumifan50,

After trying many different things to get my config working, I am happy to say your plugin works with a Geovision GV800 card running on Ubuntu with Zoneminder with all CCTV cameras visible.

It took me all week trying other methods including streaming from the server with vlc which worked too but slowly for the dreambox, then by chance I found a post for geovision single jpeg mode and thought I would give it a go and sure enough it works.

Only one change to my previous URL and config the word "single" instead of "jpeg".

Like below:

http://192.168.1.120/cgi-bin/nph-zms?mode=single&monitor=16&user=admin&pass=admin

{command}{foscam1.snapshot}{/cgi-bin/nph-zms?mode=single&monitor=16&user=admin&pass=admin}
{command}{foscam1.protocol}{http://}
{command}{foscam2.snapshot}{/cgi-bin/nph-zms?mode=single&monitor=22&user=admin&pass=admin}
{command}{foscam2.protocol}{http://}
{command}{foscam3.snapshot}{/cgi-bin/nph-zms?mode=single&monitor=20&user=admin&pass=admin}
{command}{foscam3.protocol}{http://}
{command}{foscam4.snapshot}{/cgi-bin/nph-zms?mode=single&monitor=21&user=admin&pass=admin}
{command}{foscam4.protocol}{http://}
{camera}{192.168.1.120}{foscam1}{Gate}{admin}{admin}
{camera}{192.168.1.120}{foscam2}{Pool-Garden}{admin}{admin}
{camera}{192.168.1.120}{foscam3}{Front-Door}{admin}{admin}
{camera}{192.168.1.120}{foscam4}{Side}{admin}{admin}

More info here: http://www.zoneminder.com/forums/viewtopic.php?f=9&t=18939

Hi Shumifan,

first thumbs up for your great plugin!!!
I use the plugin in combination with my door bell. if it rings the camera pops up. Now it would be very nice, if i could send a http request to open the door (from the dreambox remote).
It would be easy to use one of the PTZ commands, but the request must be send to a different ip...
{command}{Axis.up}{http://192.168.0.1/opendoor.sh }
{command}{Axis.snapshot}{/axis-cgi/jpg/image.cgi?resolution=640x480}
{command}{Axis.protocol}{http://}
{camera}{http://192.168.0.2}{Axis}{Eingang}{root}{root}

Is there a way to solve my problem? I´m using just one camera, so i can live with a "hack" e.g. every PTZ command points to 192.168.0.1...
I tried to read the plugin.pyc but with no luck...

Thanks in advanced

FTZ