IPCamViewer for Enigma2

Wir haben aktuell ein Problem mit dem Board und arbeiten an der Lösung...


-> Aktuell bereiten wir das Upgrade auf die aktuelle Version 6 von Woltlab vor.

    All credit for this plugin goes to shumifan50


    A plugin for Enigma2 that allows viewing and control of IP based security cameras. It allows viewing and pan/tilt/zoom of connected cameras. Viewing supports Picture-in-Picture while watching TV, even if the STB does not have more than one decoder (e.g. DM800, DM500HD and VU+DUO). It also allows viewing multiple cameras fullscreen (4 cams at a time). PIP position and size controlled from remote.


    The camera has to be IP based, use the HTTP protocol and must support a snapshot interface rendering a JPEG image. Security supported is the HTTP basic security.


    Tested with Foscam security cameras and Marmitek robocam IP21


    For further information see documentation inside zip!

    Does anyone know if that is the right snapshot command for an Axis cam?
    {command}{axis.snapshot}{/view/snapshot.shtml?picturepath=/jpg/1/image.jpg}
    As an Enigma2 restart is required after every (unsuccessful) test, debugging is a bit time consuming.


    Does anyone know if https is supported yet?


    Thx

    try this




    Code
    http://IP-Of-Cam:port/axis-cgi/jpg/image.cgi?resolution=640x480&camera=1&compression=50


    nierotter


    tell us the result

    So I should enter this command line right?


    {command}{axis.snapshot}{/axis-cgi/jpg/image.cgi?resolution=640x480&camera=1&compression=50}

    klingt ja interessant..
    wüsste gern ob das auch mit einer viviotek pz7152 funktioniert..
    als protokoll hätte ich rtsp (als format endung *.sdp)
    und als jpeg die format endung *.mjpg


    vielleicht kann mir ja mal jemand helfen und paar infos geben

    2x Dm 8000, Ds409, Qnap TS-459 Pro II, SPF-107H,Onkyo TX NR-509,Teufel Consono 35,PS3,Fritzbox 7270,7390,Wii,XboX1,Down 50 Mbits, Up 10 Mbits

    Zitat

    Original von moofy
    So I should enter this command line right?


    {command}{axis.snapshot}{/axis-cgi/jpg/image.cgi?resolution=640x480&camera=1&compression=50}


    try it :) I dont have this plugin installt....


    Vivotek kenne ich nur die alten... und bei denen ist es


    Code
    http://ip-de-cam:port/cgi-bin/video.jpg

    hallo..
    bei mir würden die pfade so aussehen..


    If the stream1 is using MPEG-4, the default path for MPEG-4 is rtsp://<IP>:<rtsp port>/live.sdp
    If the stream1 is using Motion-JPEG, the default path for MJPG is http://<IP>:<http port>/video.mjpg
    If the stream2 is using MPEG-4, the default path for MPEG-4 is rtsp://<IP>:<rtsp port>/live2.sdp
    If the stream2 is using Motion-JPEG, the default path for MJPG is http://<IP>:<http port>/video2.mjpg



    gibts da ne möglichkeit dafür oder eher nicht.. wäre prima wenn das gänge

    2x Dm 8000, Ds409, Qnap TS-459 Pro II, SPF-107H,Onkyo TX NR-509,Teufel Consono 35,PS3,Fritzbox 7270,7390,Wii,XboX1,Down 50 Mbits, Up 10 Mbits

    Wie obn schon gesagt wurde, das wird so nicht gehen. Du brauchst den Pfad zu einem "snapshot" also die Adresse für ein einzelnes jpg


    Nierotter

    Servus!
    Waiting for a long time for such plugin! :hurra:


    Unfortunatelly for me, with my dm800 and GP3 is not working yet :loudly_crying_face:
    Is listed in plugin list, but when selected, I have only gears running...
    I tried to modify IPCamViewer.conf through DCC for my Axis cam but no success.


    Any help would be very much appreciated!

    Hi moofy,


    the following lines I found on vivotec dot com support/faq.php?faqcon=160&catagory=url recently:
    it's not testet by myselves.
    You can type URL command http://<IP of your camera>/cgi-bin/video.jpg to get the snapshot.


    If you are using our new 7000 series and 8000 series cameras or video server, you can type another URL command http://<IP address of your device>/cgi-bin/viewer/video.jpg to get the snapshot.


    franky


    Hi franky,


    that is what I tested:


    IPCamViewer.conf

    Code
    {command}{cam.snapshot}{/jpg/image.jpg} 
{command}{cam.protocol}{http://} 
{camera}{IP Address:Port}{cam}{name}{user}{pass}


    Without success until now. The string works fine in a web browser.
    The IPCamViewer documentation says that theese three lines are required.


    Cheers

    also gehts hier um snapshots?
    das müsste die pz7152 von viviotek ja auch machen...
    in welchen intervall werden die aktualisiert?

    2x Dm 8000, Ds409, Qnap TS-459 Pro II, SPF-107H,Onkyo TX NR-509,Teufel Consono 35,PS3,Fritzbox 7270,7390,Wii,XboX1,Down 50 Mbits, Up 10 Mbits

    FINALLY!!! Oh, this is great.

    checking for long long... yes
    checking for long double... yes
    +++ Divide By Cucumber Error. Stopping. +++

    Zitat

    Original von mamba0815
    FINALLY!!! Oh, this is great.


    Can you post vour *.conf for all users please ?
    So we can save any conf for different ipcams.
    You can xxx the ip :)



    Nierotter

    I try it with my AXIS Cam, and i got a green screen.. :frowning_face:
    Can you help ?


    My conf only has 3 lines...



    {command}{foscam.snapshot}{/axis-cgi/jpg/image.cgi}
    {command}{foscam.protocol}{http://}
    {camera}{192.168.1.91:9010}{foscam}{Cam1}



    And here is the LOG



    action -> WizardActions ok
    entering __int__()
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++, size_w=1280; size_h=720; space=0, fourByThree_w=960, invisible_h=-240
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++, size_w=1280; size_h=720; space=0, fourByThree_w=960, invisible_w =320
    +++++++++++++++++++++++++++++++++++ startWithPIP=True
    Setting PIP mode================
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++, size_w=640; size_h=480; space=0
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ recording Directory=/media/hdd/IPCamViewer
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ s={command}{foscam.snapshot}{/axis-cgi/jpg/image.cgi}
    {command}{foscam.protocol}{http://}
    {camera}{192.168.1.91:9010}{foscam}{Cam1}




    ============================================================== i=1,li=commandfoscam.snapshot/axis-cgi/jpg/image.cgicommand
    ============================================================== i=4,li=commandfoscam.protocolhttp://camera
    ============================================================== i=7,li=camera192.168.1.91:9010foscamCam1
    Screen <class 'Plugins.Extensions.IPCamViewer.plugin.ViewCamImage'>((), {}): <type 'exceptions.IndexError'>
    Traceback (most recent call last):
    File "/usr/lib/enigma2/python/mytest.py", line 231, in create
    return screen(self, *arguments, **kwargs)
    File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 398, in __init__
    IndexError: list index out of range
    Traceback (most recent call last):
    File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
    res = self.actions[action]()
    File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 59, in save
    self.run()
    File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 63, in run
    plugin(session=self.session)
    File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 1222, in main
    File "/usr/lib/enigma2/python/mytest.py", line 305, in open
    dlg.isTmp = True
    AttributeError: 'NoneType' object has no attribute 'isTmp'
    (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x2e5b9350>>,('WizardActions', 'ok')) failed)
    getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
    getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
    getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)






    Nierotter


    Ich hab hier die selben Probleme mit meiner Cam die in der Firma ist.
    Die adresse /jpg/image.jpg ist korrekt da diese im Browser angezeigt wird.


    Der IpCamViewer wird aber nicht gestartet und nur die zwei Zahnräder drehen sich und die Box hängt sich aber auf :frowning_face:



    Die Kam ist eine ABUS TVIP20550

    Could s.o. please ask the developer shumifan50 to change the behaviour
    so that an error in the config file does not always require a Enigma restart.
    Please implement a timeout e.g. after 15 sec which kills the process. Thx