hallo, ich versuche grad mein bruder seine 7025 mit dem neuen icvs vom 23.12 zu installieren. das klappt auch wenn ich dann aber den gemini wizzard installiere, scheint das auch zu funktionieren aber nach dem neu start hab ich kein bluepanel. installiere die version ohne plugins. hab scon neu geflasht paar mal aber immer das gleiche.
ich han hier irgendwo schon gelesen das jemand das problem auch hatte kanns aber nciht mehr finden
über schnelle hilfe wäre ich sehr dankbar
(GELÖST) kein bp nach wizzard installation dm7025
Wir haben aktuell ein Problem mit dem Board und arbeiten an der Lösung...
-
-
auch nicht in den Einstellungen (Hauptmenu)?
-
nein auch nicht.
hab grad versucht den wizzard manuell auf die box zu ziehen und zu instalieren aber auch gleiches ergebniss.
natürlich neustart immer gemacht -
Hat die Box eine funktionierende Internetverbindung?
-
ja, alles andere geht also ich kann in den erweiterungen plugins sehen
-
Ich klink mich mal mit ein. Ich hab das gleiche Problem. Nach Installation vom icvs 23.12. und ausführen des Wizards macht die Box irgendwas , dann kommt Box wird neu gestartet, es kommt allerdings kein BP. Egal ob man die Full Variante oder die Min vom GP3 wählt... ca 10 mal probiert...
Internet Verbindung ist OK. Entweder ein Problem mit icvs oder dem GP3 Plugin!
-
Ich bin gerade dabei, meine Boxen von GP3 Version 0.17-R1 auf die heute eingestellte Version 0.18-R0 upzudaten.
Bei den Boxen 8000 und 800 kein Problem.Bei der 7025 wird mir das Update angezeigt, aber nach der Installation ist noch immer die alte Version 0.17-R1 auf der Box. Aus irgendeinem Grund wird die Installation verhindert.
Vielleicht liegt hier das gleiche Problem vor wie bei der Verweigerung der Neuinstallation?
Bug im Plugin bei der 7025?
Gruß Minta
-
geh per telnet auf die Box
dann
init 4
enigma2jetzt siehste die Meldungen
-
der zieht dann nen ewig langen text
-
Das ist normal, die Box ist dann wieder bedienbar und damit führst du
per FB das Installieren des GP3wizard aus und beobachtest, was in
der Konsole für Fehlermeldungen kommen. -
du musst den Text hier posten...
also nicht alles, erst ab dann wenn du im Wizard die Installation startest. -
Habe heute auch das neuste iCVS und das GP3 auf meiner 8000er installiert und muß sagen das nach Neustart das Blue Panel plötzlich auch nicht mehr da war.
Habe nochmal drüber installiert und nun gehts...hoffe ich. -
wie kopiere ich dem text aus dem telnet?
-
so siehts aus
action -> WizardActions ok
executing /usr/bin/ipkg update
data: Downloading http://download.blue-panel.com…m7025/opendreambox/1.6/fe
ed/23122010/all/Packages.gz
Inflating http://download.blue-panel.com…endreambox/1.6/feed/23122
010/all/Packages.gz
Updated list of available packages in /var/lib/opkg/iCVS-all
Downloading http://download.blue-panel.com…opendreambox/1.6/feed/231
22010/dm7025/Packages.gz
Inflating http://download.blue-panel.com…endreambox/1.6/feed/23122
010/dm7025/Packages.gz
Updated list of available packages in /var/lib/opkg/iCVS-dm7025
Downloading http://download.blue-panel.com/gemini3/all/Packages.gz
Inflating http://download.blue-panel.com/gemini3/all/Packages.gz
Updated list of available packages in /var/lib/opkg/gemini-all
Downloading http://download.blue-panel.com/gemini3/dm7025/Packages.gz
Inflating http://download.blue-panel.com/gemini3/dm7025/Packages.gz
Updated list of available packages in /var/lib/opkg/gemini-dm7025
Downloading http://download.blue-panel.com/gemini3/mipsel/Packages.gz
Inflating http://download.blue-panel.com/gemini3/mipsel/Packages.gz
Updated list of available packages in /var/lib/opkg/gemini-mipsel
Downloading http://download.blue-panel.com…opendreambox/1.6/feed/231
22010/Packages.gz
Inflating http://download.blue-panel.com…endreambox/1.6/feed/23122
010/Packages.gz
Updated list of available packages in /var/lib/opkg/iCVS
Downloading http://download.blue-panel.com…opendreambox/1.6/feed/231
22010/mipsel/Packages.gz
Inflating http://download.blue-panel.com…endreambox/1.6/feed/23122
010/mipsel/Packages.gz
Updated list of available packages in /var/lib/opkg/iCVS-mipselchild has terminated
pipes closed
executing /usr/bin/ipkg install g3install-light
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
nr_read 109 nr_write 17
sum 126 prev_sum 121
hdd was accessed since previous check!
[IDLE] 0 60 False
data: Installing g3install-light (0.10-r1) to root...
Downloading http://download.blue-panel.com…25/./g3install-light_0.10
-r1_dm7025.ipkdata: Installing g3install-light (0.10-r1) to root...
Downloading http://download.blue-panel.com…25/./g3install-light_0.10
-r1_dm7025.ipkdata: Installing g3install-light (0.10-r1) to root...
Downloading http://download.blue-panel.com…25/./g3install-light_0.10
-r1_dm7025.ipk
libfuse2: unsatisfied recommendation for kernel-module-fusedata: Collected errors:
* ERROR: Cannot satisfy the following dependencies for g3install-light:
* kernel-module-fuse *
* Cannot find package g3install-light.child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
nr_read 109 nr_write 19
sum 128 prev_sum 126
hdd was accessed since previous check!
[IDLE] 0 60 False
Timeout!
main thread is non-idle! display spinner!
No packages removed.
nr_read 109 nr_write 32
sum 141 prev_sum 128
hdd was accessed since previous check!
[IDLE] 0 60 False
stopService
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- saving lame channel db
saved 0 channels and 0 services!
release cached channel (timer timeout)
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
- (35) CI Slots
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
FBIO_SET_MANUAL_BLIT: Invalid argument
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (1) Background File Eraser
reached rl -1
root@dm7025:~# -
-
Hat zwar etwas gedauert, aber hier der Output von mir beim Upgrading:
data: Upgrading geminiplugin on root from 0.17-r1 to 0.18-r0...
Downloading http://download.blue-panel.com…el/./geminiplugin_0.18-r0
_mipsel.ipk
data: Upgrading geminiplugin on root from 0.17-r1 to 0.18-r0...
Downloading http://download.blue-panel.com…el/./geminiplugin_0.18-r0
_mipsel.ipk
data: Collected errors:
* ERROR: Cannot satisfy the following dependencies for geminiplugin:
* kernel-module-fuse *
child has terminated
pipes closed
1 1
poll: unhandled POLLERR/HUP/NVAL for fd 66(16)
action -> WizardActions back
nr_read 43 nr_write 1
sum 44 prev_sum 44
hdd IDLE!
[IDLE] 76.7114031315 60 True
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> MsgBoxActions ok
action -> gActions exit
nr_read 43 nr_write 1
sum 44 prev_sum 44
hdd IDLE!
[IDLE] 82.7114019394 60 True
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
allocating new converter!Gruß Minta
-
wir basteln gerade ein kernel-module-fuse, dauert aber noch ein wenig, weil der Kernel 2.6.12 noch kein fuse hatte...
-
könnt ihr nochmal testen...
wir haben jetzt eine gebastelt, nur ob die geht, bitte nochmal ausprobieren
wenn nicht, brauchen wir die Fehlermeldung -
Ich bin mir ja nicht sicher ob es gestattet ist auf die Boardsuche zu verweisen, aber fuse module für die 7025 gibt es z.B. im TrueCrypt / Luks Thread als ipk.
-
fuse-module haben wir natürlich auch, nur brauchen wir kernel-modules-fuse