Datei in data/android rein gemacht un per Telnet das eingegeben.
root@dreambox:~$ cd /data/android
root@dreambox:/data/android$ ./gapps-dreamos.sh
-bash: ./gapps-dreamos.sh: Permission denied
was mache ich FALSCH?
Datei in data/android rein gemacht un per Telnet das eingegeben.
root@dreambox:~$ cd /data/android
root@dreambox:/data/android$ ./gapps-dreamos.sh
-bash: ./gapps-dreamos.sh: Permission denied
was mache ich FALSCH?
Installiert : gapps-dreamos-20190925
Dann kommt dies.
* Checking available device /dev/mmcblk1p2...
* Waiting for automount to exit...
mount: special device /dev/mmcblk1p2 does not exist
Wenn ich Androide TV öffne dauert es sehr lange bis die Inhalte kommen. Ist das normal?
Alles anzeigenInstalliert : gapps-dreamos-20190925
Dann kommt dies.
* Checking available device /dev/mmcblk1p2...
* Waiting for automount to exit...
mount: special device /dev/mmcblk1p2 does not exist
da findet die box die sdkarte nicht.
gib vorher mal
ein und poste die Ausgabe
Disk /dev/mmcblk0: 15.6 GB, 15634268160 bytes
4 heads, 16 sectors/track, 477120 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/mmcblk0 doesn't contain a valid partition table
Disk /dev/mmcblk0boot1: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders
Entweder steckt die sdcarte nicht richtig, oder die ist hin/deformatiert?
Ich würde die Box mal runterfahren sd raus, hochfahren, reinstecken und noch mal mit fdisk nachsehen ob die nun erkannt wird.
/dev/mmcblk1 wäre die sdcard
Disk /dev/mmcblk0 doesn't contain a valid partition table
Disk /dev/mmcblk0boot1: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table
Disk /dev/mmcblk1: 3980 MB, 3980394496 bytes
255 heads, 63 sectors/track,
Alles anzeigen
jetzt hat die Box die sd gefunden, probier es halt nochmal.
Da fehlt aber was von der Ausgabe:
die sdcard sollte ja mit:
/dev/mmcblk1p4 (partition 1 VFAT = boot)
/dev/mmcblk1p2 (partition 2 EXT4)
/dev/mmcblk1p3 ...
Partitionierung & Formatierung angezeigt werden.
Ist das so richtig?
Stick in Box + Booten
Dann Datei in data rein
Telnet eingabe:
cd /data
tar -xzvf android9-sdcard_20190920.tar.gz -C /
cd /data/android
./flash_all_sd.sh /dev/mmcblk1
reboot
Box Bootet.
Dann komme ich in Telnet nicht rein um die gapps-dreamos.sh zu installieren.
klar, dann bist Du im Android.
Das script sollst Du aber in enigma ausführen.
SD raus, Box ins enigma booten, sd rein, im telnet mit fdisk schauen ob die sd eingehängt wird. Dann das script starten.
I do not know what I can do with it :
Log:
root@dreambox:~# cd /data/android
root@dreambox:/data/android# ./flash_all_sd.sh /dev/mmcblk1
Dreambox Android flash all sdcard script
Running from: /data/android
Umounting device...
Done
Partitioning /dev/mmcblk1 device...
Checking that no-one is using this disk right now ... FAILED
This disk is currently in use - repartitioning is probably a bad idea.
Umount all file systems, and swapoff all swap partitions on this disk.
Use the --no-reread flag to suppress this check.
sfdisk: Use the --force flag to overrule all checks.
klar, dann bist Du im Android.
Das script sollst Du aber in enigma ausführen.
SD raus, Box ins enigma booten, sd rein, im telnet mit fdisk schauen ob die sd eingehängt wird. Dann das script starten.
So sieht’s aus
wieder keine sdcarte, ka warum
Karte habe ich mit ext4 Formatiert.
Image : Newnigma2
Welche SD Karte wird empfohlen?
ich hab scandisk >class 10 original img, aber auch viele andere langsame sd.
Hab da nie Probleme, dass enigma die erkennt.
Die sdcarte ist nach der Installation ja in mehrere Partitionen und mit verschiedenen Dateisystemen.
Beim installieren des Android wird deine sdcard ja auch erkannt.
eventuell musst länger warten nach dem reinstecken, mit fdisk -l kannst ja immer schauen ob die gefunden wurde.
oder mal ein und ausstecken, aber erst mit fdisk schauen, dass die nicht erkannt wurde vor dem rausziehen.
Hab mal zum Testen eine andere SD Karte rein gemacht!
So richtig?
Die wird erkannt (letzte Zeile)
zur Zeit sind 21 Mitglieder (davon 3 unsichtbar) und 457 Gäste online - Rekord: 5.796 Benutzer ()