Posts by roy

i looking image backup 0.4 for gemini

i not found it

dm920 login: root
root@dm920:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 961M 405M 490M 46% /
devtmpfs 492M 0 492M 0% /dev
tmpfs 500M 0 500M 0% /dev/shm
tmpfs 500M 17M 483M 4% /run
tmpfs 500M 0 500M 0% /sys/fs/cgroup
/dev/mmcblk0p3 6.1G 93M 5.7G 2% /data
tmpfs 500M 8.0K 500M 1% /tmp
tmpfs 500M 12K 500M 1% /var/volatile
/dev/sda1 60G 52M 60G 1% /media/hdd
root@dm920:~#
root@dm920:~# dm920 login: root

i iinstall origirinal image it still same problem not found folder media hdd movie
how to returen the file usb micro sd cant maunt
i got errore creator folder
thanks for replay

what command on telnet to format sc card

when i put adapter kingstone reader
i cant init sd card 64gb
tomorow i upload photo

ard pakege sd end 2021 january
will be free transponder start uhd " geplant "

hello
i hae sd card i formated on fa 32 first time
how to format ext 4 internal dreambox
what command on telnet need to be write
2-it is have diffrent from os os 2.5 and os 2.6 from dreambox dm900 and one ?
how unmount all command on telnet
thnaks for help

hello wait to june 9 will be dreambox two comming soon

i tested internal image on dreambox one
not read internal card
the chip is up
any plug to install to be read internal card ?

any new image will be plan of dm 920 have new kernel

I got m2 ssd 5480 Kingstone is support and ssd 1 tb Samsung ?

how I delete cam fro gemini gp 4
I not found the way to be delete it

please add yellow bottion epg
and red bottion hbb
green botion plugin
blue bottion panel

enigma2: 4.3.1r11
- fixed tune to DVB-S(2) services when a DVB-C/T(2) tuner simultaneously is used

I see the signal but I cant see any channel I got 0 channel
what paramet need to be put

hello I cant scan transponder 115553 h sr25500 fec 11/20 qpsk
I not fec more then 9/10

I back update file
settings.tar.gz
it not help

Console log:[*] Mounting '/dev/mmcblk0p2' to '/mnt'
[*] Remounting '/dev/mmcblk0p3' to '/data'
[*] Mounting 'tmp' to '/mnt/tmp'
[*] Creating /data/.recovery/settings.tar.gz from /mnt
[*] Unmounting '/mnt/tmp'
[*] Unmounting '/mnt'

problem directory
Starting udev
[ 0.843762] mmcblk0boot1: unknown partition table
[ 0.845044] mmcblk0boot0: unknown partition table

hello
my dreambox I flash dmm or gimini after rebot rescue mode

CPU 01
Dreambox DM900
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138M HW:hpf0_b1p6 V:2.1.0.0
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000381(897)
temperature=00009dd7(40407)
PV=00000344(836)
MV=0000037e(894)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: !@ ffe0e780 <= ffe0df10 MEMSYS-0 @ f1100000 OK
DDR1: =@ ffe0e780 <= ffe0df10 MEMSYS-1 @ f1180000 OK
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss 07080cd0
_ebss 0713dd70
_end 0713dd90
HEAP @ 07200000
STACK @ 09300000
ARCH: CONFIG OK
CLR BSS 07080cd0 to 0713dd70 OK
CLR SRAM OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

,/
,'/___, BOLT v1.18 v1.18 LOCAL BUILD
.'__ ,' (2016-12-01 16:24:31 cynric@cynric-VirtualBox)
/,' Copyright (C) 2016 Broadcom
/'

Board: BCM97252SSFF
SYS_CTRL: product=72521, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822000e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000021: moca2_disable(0x00000001) rfm_disable(0x00000020)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1067MHz, DDR1 @ 1067MHz
RESET CAUSE: 0x000001 power_on (1 of 23 possible causes)
CS0: SFDP SPI, 32MB, 64kB blocks, 64kB erase block, 256B pages
EMMC1: transfer complete intr error, intr=0x208000
Command 8 failed
EMMC1: device failed to enter transfer mode
CS1: NAND: unrecognized ID: 0xffff 0xffffffff
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 5
card if inited
set pwm to 0/255
disp id 5420
load image
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.896V, T=+42.355C, PV=0.836V, MV=0.894V, FW=30333278 [0.3.2.x]
USB otp=00000040
USB @ 0xf0470200: IPP is active low, IOC is negative polarity
init fp
found card in unknown state
ca valid!
set pwm to 200/255
Normal bootup
Default boot device not found!
Booting failed. Running recovery
Loader:zimg Filesys:raw Dev:flash0.recovery File: Options:(null)
Reading 11632552 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7716000)

32 bit boot...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-1.15-dm900 (dm900@opendreambox.org) (gcc version 5.3.0 (GCC) ) #2 SMP Mon May 1 07:51:45 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: BCM97252SSFF
[ 0.000000] moving dtb from 0x0000000007716000 to 0x0000000000f49d70
[ 0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
[ 0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
[ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] MCP: Enabling write pairing
[ 0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s9024 r8192 d15552 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523776
[ 0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 999664K/2097152K available (6110K kernel code, 214K rwdata, 1588K rodata, 7496K init, 208K bss, 1081104K reserved, 16384K cma-reserved, 786428K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc078cb24 (7699 kB)
[ 0.000000] .init : 0xc078d000 - 0xc0edf340 (7497 kB)
[ 0.000000] .data : 0xc0ee0000 - 0xc0f15a60 ( 215 kB)
[ 0.000000] .bss : 0xc0f15a68 - 0xc0f49d70 ( 209 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
[ 0.000008] Switching to timer-based delay loop
[ 0.000236] Console: colour dummy device 80x30
[ 0.000256] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[ 0.000265] pid_max: default: 32768 minimum: 301
[ 0.000358] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000365] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.005776] Initializing cgroup subsys devices
[ 0.005790] Initializing cgroup subsys freezer
[ 0.005797] Initializing cgroup subsys net_cls
[ 0.005824] CPU: Testing write buffer coherency: ok
[ 0.006045] CPU0: update cpu_power 1024
[ 0.006051] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.006101] Setting up static identity map for 0x5d4590 - 0x5d45e8
[ 0.007316] CPU1: Booted secondary processor
[ 0.007335] CPU1: update cpu_power 1024
[ 0.007337] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007433] Brought up 2 CPUs
[ 0.007442] SMP: Total of 2 processors activated.
[ 0.007447] CPU: All CPU(s) started in SVC mode.
[ 0.007825] devtmpfs: initialized
[ 0.011357] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[ 0.011910] regulator-dummy: no parameters
[ 0.012102] NET: Registered protocol family 16
[ 0.013021] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.013223] cpuidle: using governor ladder
[ 0.013227] cpuidle: using governor menu
[ 0.014366] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
[ 0.014448] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.016132] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
[ 0.016207] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
[ 0.016273] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
[ 0.016339] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
[ 0.016402] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
[ 0.016467] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
[ 0.016532] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
[ 0.016594] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
[ 0.016657] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
[ 0.016728] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
[ 0.016794] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
[ 0.016858] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
[ 0.016919] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
[ 0.016985] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
[ 0.017303] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[ 0.017529] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
[ 0.021887] bio: create slab <bio-0> at 0
[ 0.022183] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
[ 0.022210] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
[ 0.022237] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
[ 0.022250] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
[ 0.022600] SCSI subsystem initialized
[ 0.022810] usbcore: registered new interface driver usbfs
[ 0.022839] usbcore: registered new interface driver hub
[ 0.022896] usbcore: registered new device driver usb
[ 0.022915] media: Linux media interface: v0.10
[ 0.022941] Linux video capture interface: v2.00
[ 0.022979] pps_core: LinuxPPS API ver. 1 registered
[ 0.022983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.022993] PTP clock support registered
[ 0.023223] Advanced Linux Sound Architecture Driver Initialized.
[ 0.023509] Bluetooth: Core ver 2.18
[ 0.023525] NET: Registered protocol family 31
[ 0.023528] Bluetooth: HCI device and connection manager initialized
[ 0.023537] Bluetooth: HCI socket layer initialized
[ 0.023543] Bluetooth: L2CAP socket layer initialized
[ 0.023549] Bluetooth: SCO socket layer initialized
[ 0.023948] Switched to clocksource arch_sys_counter
[ 0.023958] cfg80211: Calling CRDA to update world regulatory domain
[ 0.028270] thermal thermal_zone0: failed to read out thermal zone 0
[ 0.028354] NET: Registered protocol family 2
[ 0.028740] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.028758] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.028780] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.028813] TCP: reno registered
[ 0.028820] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.028831] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.028963] NET: Registered protocol family 1
[ 0.029189] RPC: Registered named UNIX socket transport module.
[ 0.029195] RPC: Registered udp transport module.
[ 0.029198] RPC: Registered tcp transport module.
[ 0.029201] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.248178] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.248533] bounce pool size: 64 pages
[ 0.249099] NFS: Registering the id_resolver key type
[ 0.249137] Key type id_resolver registered
[ 0.249141] Key type id_legacy registered
[ 0.249151] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.249289] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.249590] msgmni has been set to 448
[ 0.250301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.250309] io scheduler noop registered
[ 0.250327] io scheduler cfq registered (default)
[ 0.250553] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
[ 0.250844] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
[ 0.316242] brcmstb_memc f1102000.memc-ddr: registered
[ 0.316270] brcmstb_memc f1182000.memc-ddr: registered
[ 0.316478] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.317290] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
[ 0.413790] console [ttyS0] enabled
[ 0.415037] loop: module loaded
[ 0.415679] ahci brcmstb-ahci.0: can't get clock
[ 0.416302] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
[ 0.427963] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.428960] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
[ 0.431650] scsi0 : ahci_platform
[ 0.432276] scsi1 : ahci_platform
[ 0.432778] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
[ 0.433696] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
[ 0.435137] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
[ 0.435905] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
[ 0.439254] m25p80 spi32766.0: found mx25l25635e, expected m25p80
[ 0.439982] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
[ 0.440724] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
[ 0.441377] 5 ofpart partitions found on MTD device spi32766.0
[ 0.442057] Creating 5 MTD partitions on "spi32766.0":
[ 0.442655] 0x000000000000-0x000000200000 : "flash0.bolt"
[ 0.443811] 0x000000200000-0x000000220000 : "flash0.nvram"
[ 0.444887] 0x000000220000-0x000000240000 : "flash0.devtree"
[ 0.445947] 0x000000240000-0x000001000000 : "flash0.recovery"
[ 0.447012] 0x000000000000-0x000002000000 : "flash0"
[ 0.448329] libphy: Fixed MDIO Bus: probed
[ 0.448933] tun: Universal TUN/TAP device driver, 1.6
[ 0.449526] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.450580] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[ 0.463952] libphy: bcmgenet MII bus: probed
[ 0.486805] xhci-brcm: xHCI BRCM driver
[ 0.487347] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.488020] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
[ 0.489184] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
[ 0.490058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.490837] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.491674] usb usb1: Product: xHCI Host Controller
[ 0.492241] usb usb1: Manufacturer: Linux 3.14-1.15-dm900 xhci-hcd
[ 0.492965] usb usb1: SerialNumber: f0471000.xhci_v2
[ 0.493857] hub 1-0:1.0: USB hub found
[ 0.494318] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 0.495251] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
[ 0.495910] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
[ 0.496934] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.497721] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.498556] usb usb2: Product: xHCI Host Controller
[ 0.499123] usb usb2: Manufacturer: Linux 3.14-1.15-dm900 xhci-hcd
[ 0.499832] usb usb2: SerialNumber: f0471000.xhci_v2
[ 0.500683] hub 2-0:1.0: USB hub found
[ 0.501143] hub 2-0:1.0: 2 ports detected
[ 0.501910] ehci-brcm: EHCI BRCM driver
[ 0.502438] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
[ 0.503109] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
[ 0.514124] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
[ 0.519956] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.520761] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.521549] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.522384] usb usb3: Product: EHCI Host Controller
[ 0.522951] usb usb3: Manufacturer: Linux 3.14-1.15-dm900 ehci_hcd
[ 0.523660] usb usb3: SerialNumber: f0470300.ehci_v2
[ 0.524509] hub 3-0:1.0: USB hub found
[ 0.524970] hub 3-0:1.0: 1 port detected
[ 0.525616] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
[ 0.526284] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
[ 0.537283] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
[ 0.543953] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
[ 0.544754] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.544961] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.546161] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.547000] usb usb4: Product: EHCI Host Controller
[ 0.547562] usb usb4: Manufacturer: Linux 3.14-1.15-dm900 ehci_hcd
[ 0.548277] usb usb4: SerialNumber: f0470500.ehci_v2
[ 0.549202] hub 4-0:1.0: USB hub found
[ 0.549655] hub 4-0:1.0: 1 port detected
[ 0.550376] ohci-brcm: OHCI BRCM driver
[ 0.550890] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
[ 0.551559] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
[ 0.552484] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
[ 0.608064] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.608845] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.609680] usb usb5: Product: BRCM OHCI controller
[ 0.610247] usb usb5: Manufacturer: Linux 3.14-1.15-dm900 ohci_hcd
[ 0.610962] usb usb5: SerialNumber: f0470400.ohci_v2
[ 0.611795] hub 5-0:1.0: USB hub found
[ 0.612263] hub 5-0:1.0: 1 port detected
[ 0.612906] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[ 0.613577] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
[ 0.614496] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
[ 0.658955] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.670058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.670838] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.671672] usb usb6: Product: BRCM OHCI controller
[ 0.672239] usb usb6: Manufacturer: Linux 3.14-1.15-dm900 ohci_hcd
[ 0.672954] usb usb6: SerialNumber: f0470600.ohci_v2
[ 0.673776] hub 6-0:1.0: USB hub found
[ 0.674238] hub 6-0:1.0: 1 port detected
[ 0.674929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.675688] ehci-pci: EHCI PCI platform driver
[ 0.676247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.676963] ohci-pci: OHCI PCI platform driver
[ 0.677583] usbcore: registered new interface driver usb-storage
[ 0.678281] i2c /dev entries driver
[ 0.678729] lirc_dev: IR Remote Control driver registered, major 250
[ 0.679786] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[ 0.680769] usbcore: registered new interface driver btusb
[ 0.681465] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 0.682250] sdhci: Secure Digital Host Controller Interface driver
[ 0.682967] sdhci: Copyright(c) Pierre Ossman
[ 0.683469] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.685228] mmc0: no vqmmc regulator found
[ 0.685701] mmc0: no vmmc regulator found
[ 0.715955] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
[ 0.717865] mmc1: no vqmmc regulator found
[ 0.718344] mmc1: no vmmc regulator found
[ 0.748953] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[ 0.749904] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.750614] usbcore: registered new interface driver usbhid
[ 0.751261] usbhid: USB HID core driver
[ 0.753691] TCP: cubic registered
[ 0.754691] NET: Registered protocol family 10
[ 0.755672] NET: Registered protocol family 17
[ 0.756407] Bluetooth: RFCOMM TTY layer initialized
[ 0.756990] Bluetooth: RFCOMM socket layer initialized
[ 0.757580] Bluetooth: RFCOMM ver 1.11
[ 0.758021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.758630] Bluetooth: BNEP filters: protocol multicast
[ 0.759238] Bluetooth: BNEP socket layer initialized
[ 0.759809] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.760497] Bluetooth: HIDP socket layer initialized
[ 0.761113] l2tp_core: L2TP core driver, V2.0
[ 0.761633] Key type dns_resolver registered
[ 0.762204] Registering SWP/SWPB emulation handler
[ 0.763023] regulator-dummy: disabling
[ 0.765703] ALSA device list:
[ 0.766056] No soundcards found.
[ 0.769452] Freeing unused kernel memory: 7496K (c078d000 - c0edf000)
INIT: version 2.88 booting
[ 0.820721] mmc1: BKOPS_EN bit is not set
[ 0.830914] mmc1: new high speed MMC card at address 0001
[ 0.831876] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
[ 0.832546] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
[ 0.833393] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
[ 0.834619] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
[ 0.840364] mmcblk0: p1 p2 p3
Starting udev
[ 0.843762] mmcblk0boot1: unknown partition table
[ 0.845044] mmcblk0boot0: unknown partition table
starting version 230
[ 0.866265] random: systemd-udevd urandom read with 28 bits of entropy available
[ 1.198339] bcmdriver: module license 'Proprietary' taints kernel.
[ 1.199105] Disabling lock debugging due to kernel taint
[ 1.200129] BCMDRV: Initializing bcmdriver version $ 8
[ 1.200726] BCMDRV: Total intc words=4,Total Irqs=129
[ 1.201934] BCMDRV: Initialization complete
bootlogd: cannot allocate pseudo tty: No such file or directory
Sun Apr 30 21:28:17 UTC 2017
INIT: Entering runlevel: 5
Configuring network interfaces... [ 1.566954] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
[ 1.571549] f0b00000.ethernet: configuring instance for internal PHY
[ 1.572345] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
[ 3.573065] libphy: f0b00000.etherne:01 - Link is Down
Sending discover...
[ 5.532095] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
[ 5.532799] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 10.0.0.2...
Lease of 10.0.0.2 obtained, lease time 3600
/etc/udhcpc.d/50default: Adding DNS 10.0.0.138
done.
Starting Dropbear SSH server: Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCOgswS5X2NPTM+V4Vm0mRiQsI8BC+sCIIPzVqA8s4LlbRTKrh6HnS3qigFCh5/GQiJkY+I8kmabfG6taw0HkrDVAPL3QZyv+T5uuEKLgH/XaJmou7BsccJXe7woLxW/RctnWys/2fA656va4piLN6Yodtys8mEIaLFwqo7/WpVnqdVntam4yMVqMU2yMruMgDYltmTde2QVKxqB8DICwiRoYxgBBOZj7pfDvNkzN/XSpomM1CawINqcvj2/h0/2d29vCMv/hQTdUzKfTIxu/X6nG/Tf0N+D6S6P7OOfOZA5vWxyr9gYy0UXRe5d6OvMSAoSYvHW9UG7gz9EslRoUfz root@dm900
Fingerprint: md5 e7:e6:d4:65:76:1b:24:5a:65:e1:4e:fe:6c:43:0d:d9
dropbear.
Starting autoflashd.
Starting recovery-ui.
Starting tpmd.
[ 10.885936] random: nonblocking pool is initialized
Starting internet superserver: xinetd.
Starting Lighttpd Web Server: lighttpd.
2017-04-30 21:28:26: (../../lighttpd-1.4.39/src/log.c.194) server started

opendreambox 2.5.0 dm900 /dev/ttyS0

>>> Your Dreambox has booted into RESCUE MODE.
>>> Please log in as user 'root' (no password required),
>>> then run 'help' to get further information.

dm900 login:

any news photo of decoder dreambod anga 2012 ?

still waiting to fix enigma 2 to reload setting