hello Freunde!!
wie started man Samba ?
wo ist jeztz die Einstellung davon..
hello Freunde!!
wie started man Samba ?
wo ist jeztz die Einstellung davon..
SkyItalia geht nicht
SkyItalia geht nicht
Schaedelmeister
besteht eine Hoffnung dass es kommt ?
SkyItalia bald 2 Monate weg und die Jungs von CCcam bringen es nciht zum laufen...
ZitatOriginal von ² Bad °° Boy ²
darf man auch fragen wohinn du das CS´s möchtest? also von wo nach wo ?
frag nur aus neugier, da dir das ja sehr wichtig zu erscheinen scheint
natürlich NUR zu hause
ZitatOriginal von gutemine
wo ist das Problem, jetzt wo es eh geht kann keiner sagen das sie nicht dagegen sind !
Ich glaube Ihr versteht nicht ganz wie sowas funktioniert
LG
gutemine
wir wissen doch was der Hauptgrund ist für ein Kauft einer DreamBox.
antwort = CS
und das weiss auch TraumMultiMedia
also die frage :
lauft CS mit CI+ ??
ich frag mich schon die ganze Zeit wieso dass TraumMultiMedia so was macht.
kann es sein dass mit HD+ (CI+) alle DreamBoxen unbrauchbar werden ?
"CI+ ist kein standart usw...."
SkyIt wieder lauffähig machen
ZitatAlles anzeigenOriginal von cs_e
ja wir stecken doch alle in der Krise...
benutzt ihr eure Dreamboxen überhaupt zum TV schauen?
sonst müsstet ihr doch alle Bescheid wissen....die Nachrichten sind ja voll davon...
WIR vs. IHR ? das ist ja ein Ding!
ich wundere mich schon ein bisschen weiso TraumMultiMedia sich beklagt dass CI+ kein standart sein soll.
hätten WIR dan ein bisschen HW plobleme damit ?
sein oder nicht sein ? das ist hier die Frage !
braucht es ein Enigma hack damit SkyIt... wieder gehen wird ?
wen ja, dan ist eine DM entgültig ein Hack-receiver!
PreisSturz weil bald nix mehr gehen wird.
game over for Dream Multimedia !!!!
hallo
schon wieder ich
meine 800er hat schon 24h HD überlebt
nicht immer ist "made in china" brauchbar
zumindest der venti lauft gut
Ccam lässt sich nicht installieren
Hallo b19053
frage:
wie kann man ein "NFI Image" erzeugen oder ziehen ?
gruss
Grek2000
vielen dank für deine bemühung
habe es gleich ausprobiert ohne erfolg.
zuerst dein prog:
root@dm600pvr:/tmp> ./serialcfg --?
Serialcfg by GrEG000 (greg2k)
./serialcfg: invalid option -- -
root@dm600pvr:/tmp> ./serialcfg -?
Serialcfg by GrEG000 (greg2k)
./serialcfg: invalid option -- ?
root@dm600pvr:/tmp> ./serialcfg ?
Serialcfg by GrEG000 (greg2k)
Please wait
....................
Bye bye !
root@dm600pvr:/tmp>
und dann zb. NewCS1.50 mit Phoenix CardReader:
root@dm600pvr:/etc/tuxbox/config> /var/bin/newcs_1.50
This is NewCS 1.50 - the New CardServer by Butter-team..
Compiled on Oct 26 2007 at 16:30:58
Reading Config file from /var/tuxbox/config/newcs.xml
No certificate specified in config, trying to look in current dir..
No certificate found, dependencies will be disabled..
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 01:14:14 ] [ Box detect ] Box type 2
[ 01:14:14 ] [ Config ] Enabling SSL engine
[ 01:14:14 ] [ Config ] SSL engine disabled due to Certificate errors
[ 01:14:14 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 01:14:14 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 01:14:14 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 01:14:14 ] [ Config ] /dev/tts/0 ECM priority: round
[ 01:14:14 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 01:14:14 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 01:14:14 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 560
[ 01:14:14 ] [ Loader ] Starting Telnet on port 1001
[ 01:14:14 ] [ Loader ] Started HTTP-server on port: 8080
[ 01:14:14 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 01:14:14 ] [ Phoenix ] Opening device /dev/tts/0
[ 01:14:14 ] [ Phoenix ] Setting Parity to: ODD
[ 01:14:14 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 01:14:14 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:14:14 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 01:14:15 ] [ Loader ] Clearing all autosids on reader ...
[ 01:14:15 ] [ Loader ] Reset failed ...
[ 01:14:15 ] [ Loader ] Starting Newcamd Server on port 34000
[ 01:14:15 ] [ NewCS ] Ready to GO!
root@dm600pvr:/etc/tuxbox/config> [ 01:14:16 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 01:14:16 ] [ Phoenix ] Opening device /dev/tts/0
[ 01:14:16 ] [ Phoenix ] Setting Parity to: ODD
[ 01:14:16 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 01:14:16 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:14:16 ] [ Phoenix ] Normal RESET on node /dev/tts/0
[ 01:14:17 ] [ Loader ] Clearing all autosids on reader ...
[ 01:14:17 ] [ Loader ] Reset failed ...
[ 01:14:17 ] [ Loader ] Reader type 2 on node /dev/tts/0
[ 01:14:17 ] [ Phoenix ] Opening device /dev/tts/0
[ 01:14:17 ] [ Phoenix ] Setting Parity to: ODD
[ 01:14:17 ] [ Phoenix ] Setting 2 Stop bits on node /dev/tts/0
[ 01:14:17 ] [ Phoenix ] Setting Baud to standard 9600
[ 01:14:17 ] [ Phoenix ] Normal RESET on node /dev/tts/0
root@dm600pvr:/etc/tuxbox/config>
zur Zeit sind 13 Mitglieder (davon 2 unsichtbar) und 324 Gäste online - Rekord: 5.681 Benutzer ()