Posts by nofear-tn

it was my mistake
i have to make the sat orders like in the diseqc order A B C

every thing is fine now

thanks all

hi tony

am facing same problem now!
i have three LNB's "hotbird arabsat and nilesat" and diseqc

i dont get any channels when i scan nilesat and i get very few channels from the other sats

i got my DM800 from your shop :-0

is there any english link where i can read about this please ?

am facing a problem also now with my DM800.

i have 3 lnbs " hotbird, nilesat, arabsat"

any one got a solution or how to set them up please

thank you

yes it will be cool if we get an Enigma2

thank you so much and keep up the good work!!

hi there

i did not see a difference between this skin and kerni skin

can you advice

thanks

I advice Fighter-XP to make

<!-- HD ZERO by FXP - code by Kerni,Bacicciosat Matrix10 and finals by Fighter-XP- for good people -->

Peace guys

dear all

kindly advice where i can find the rss file where i can edit the rss feeds in Gemini 4

sorry i got it

/etc/favo_RSS.xml

where is the link???

thank you for the reply

i want to know what should i put after the below

SD interlace mode - ??
sd progressive mode -- ??
hd interlace mode -- ??
hd progressive mode -- ??

Dear all
i have DM800, i used to use autoresolution plugin with old version, i know how to match the resolution with the numbers and it give me very nice picture

how can i configure with the new interface what should i put for the below please : which numbers also i have a plasma big screen

SD interlace mode - ??
sd progressive mode -- ??
hd interlace mode -- ??
hd progressive mode -- ??
enable 1080p24
enable 1080p25
enable 1080p30

Hi Kerni

please whats the difference between dreamTV-HD and dreamTV-HD-CN

and note that i download it from BP and its working fine on my DM800 only

thanks

Dear all
i have DM800, i used to use autoresolution plugin with old version, i know how to match the resolution with the numbers and it give me very nice picture

how can i configure with the new interface what should i put for the below please : which numbers also i have a plasma big screen

SD interlace mode - ??
sd progressive mode -- ??
hd interlace mode -- ??
hd progressive mode -- ??
enable 1080p24
enable 1080p25
enable 1080p30

D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-5.1-brcmstb-dm800 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=0b07 Rev= 2.00
S: Manufacturer=Logitech
S: Product=Logitech BT Mini-Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms

T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c71e Rev= 2.00
S: Manufacturer=Logitech
S: Product=Logitech BT Mini-Receiver
S: SerialNumber=000761C87E0A
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms

T: Bus=02 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c71f Rev= 2.00
S: Manufacturer=Logitech
S: Product=Logitech BT Mini-Receiver
S: SerialNumber=000761C87E0A
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=2ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.12-5.1-brcmstb-dm800 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=3538 ProdID=0042 Rev= 1.00
S: Product=USB Mass Storage Device
S: SerialNumber=000000000020DB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=16ms

hi all
any one have a clue how to make the pointer or the mouse work in the mini dinovo

i have dm800 with 3.9

all the keys are working fine but no mouse

Bro i have extracted all the files and restarted the box

how to start the thing now or from where ? lol

i try again :
root@dm800:/media/hdd/qte4-static/bin# ls
browser
root@dm800:/media/hdd/qte4-static/bin# ./browser
QWSSocket::connectToLocalFile could not connect:: No such file or directory
No Qt for Embedded Linux server appears to be running.
If you want to run this program as a server,
add the "-qws" command-line option.
root@dm800:/media/hdd/qte4-static/bin#

i tried that but i cant add more the /HDD/ only
maybe limited caracters

Done its fixed you can cache in other folders

Hi there

i want to save the file to /hdd/tv folder

how to configure that or which file should i edit to do that

thanks

thank you
its faster then the 0.8 on my DM800 3.9

Hi there
I have a DM800 with Gimini 3.9.

Kindly advice how can i upgrade my cccam info from 0.6 to 0.8

should i remove the old first or ...

thanks in advance