Beiträge von surfer0815

Die habe ich auch eingesteckt,
läuft super - sehr leise - für mich - unhörbar,
Sk... - Aufnahmen über 24 Stunden gemischt mit 0 Fehler aufgenommen,
mit TS-Doctor2 bearbeitet- 0 Fehler bei 12 Filmen - also Top!!
wann ein Defekt eintritt , kerine Ahnung - WD Platten gehen auch kaputt !!

Nööö , die beiden haben kein Hdcp ,
versuche es doch mal mit einem Splitter -
z.B 4 K Splitter bei Ama....
da gibt es auch auf YT... eine Video

h**ps://www.amazon.de/gp/product/B00U12VVIM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

das Ding gibt das Signal 2 mal ohne _Kopierschutz aus ......

Seagate FireCuda SSHD ST2000LX001 Festplatte
Festplatte Seagate FireCuda SSHD ST2000LX001
2,5 Zoll, intern, S-ATA III, 2TB + 8GB Flash
Speicherkapazität: 2TB / 2000 GB + 8 GB Flash-Speicher
Bauform: 2,5 Zoll / 6,35cm / intern
Anschluss: SATA 6Gb/s / SATA III
Format: Solid State Hybrid Disk (SSHD)
Speichertyp: MLC (Flash-Speicher)
Puffergröße: 128 MB

Hallo,
nach den flaschen des iCVS-Image-dm8000-20111122 ,
ist meine festplatte in der box noch da und geht auch - aber
im home-netz nicht mehr vorhanden - kein zugriff mehr möglich 1

wie kann ich die Festplatte im Netzwerk wieder freigeben ???
m uß ich noch eine Erweiterung laden ?

ich bitte mal um Hilfe - Danke

- Surfer

hm,
ist komisch ,da der 4 7025 alphs Tuner erkannt wird,
bei den neuen tuner ist eine 3 pin Steckbrücke unbenutz darauf,
müßte da virlleicht ein Jumper gesetzt werden ???
oder für was sind diese Pins ?

welche Image würde für die neuen Tuner funktionieren ??

Zitat

Original von Scheisbolle
In der Bucht ca. 60 Mücken funzt ohne Probleme

geht bei mit leider nicht,muß da ein jumper gesetzt werden ??
wird einfach nicht erkannt an 1 Steckplatz - C-
im letzten Steckplatz - D- habe ich einen 7025 tuner gesteckt , der wird erkannt und funzt auch ?
ich habe aber auch noch eine alte stabile Gp2 vom 2.09.2010 darauf.
Hat da jemand einen tipp ???

Zitat

Original von Da_Neo
Netzteil kam heute an..
Gleich eingebaut.. aber tut immer noch nicht mehr, als vorher

Noch jemand ne andere Idee, woran es liegen könnte?
Würde sie ungern einschicken.

Muss nun aber wieder zur Arbeit, kann mich gegen abend nochmal melden.

Cya

Alles anzeigen

hy,

muß nicht das Netzteil sein -
sieht eher nach den defekten Video-Chip aus
( wenn gar kein Bild beim booten kommt !)
war bei mir genau der selbe Fehler -
Chip gewechselt und alles ok.
(bolvan - ist dafür absoluter Experte - frag da mal nach)

happy bytes

lese doch mal hier nach :
7025 - Netzteil vermutlich defekt

Hurra , meine 7025 Twin lebt wieder !!!!!

Danke - bolvan ,

in kurzer Zeit Fehler gefunden, superproffesionall Videochip gewechselt,
Biosfehler behoben - uns die gute rennt wieder wie eine Henne !!!
wieder zurückgeschickt - Service vom Feinsten !!!!

Da kann sich Dream mal eine Scheibe abschneiden -
es geht auch ohne mutterbopardwechsel wieder - super Arbeit!

Du erhälst den Titel " Hardware Spezi des Monats "

Danke sagt nochmal - Surfer0815

Du bist spitze !!!!!!

surfer0815

Bloß wo kommt der falsche Eintrag her ???

Loggumleitung zum Terminal ??

So,bin wieder zu Hause,

ich habe noch einmal mit DreamUp 1335 mit der Optinon ,defekte Sektoren rep., alles nochmal geflescht Gem.4.7 ,

21:22:43 Boxtyp: DM7025
21:22:43 "defekte Sektoren wiederherstellen" aktiviert
21:23:48 Berechne Prüfsumme...
21:23:48 Lade Datei zur Box hoch...
21:23:55 Die Box flasht jetzt aus dem lokalen RAM...
21:23:56 Log: +++ 015 bad sector recovery enabled
21:25:14 OK, Flashen war erfolgreich

tuner sind ok - habe die mal in meiner 8000er laufen lassen -
gehen alle beide,

Spannungen stehen immer noch mit geringen Differenzen ??
Hat jemand die richtigen Spannungen einer ganzen 7025 - twin ?

1.) (rot) 0V
2.) 2,5V
3.) 2,5V
4.) 0V
5.) 3,01V
6.) 0V
7.) 5,02V
8.) 0V
9.) 12V
10.) 12,01V
11.) 0V
12.) 15V
13.) 3,02V
14.) 12V,02

aber die Box bleibt beim Start wieder hängen,ip wird angezeigt,der Balken läuft bis auf ca. 3/4 - dann bleibt er eisern stehen und nichts geht mehr,
während des Bootens ist auch kein Bild zu sehen, nur beim einschalten mal ganz kurz schwarz,weisse Balken horizontal über den b-schirm,

Bootloog ohne Eingriff ins Bios7mitloggen nicht extra eingeschaldet :
*Dreambox D M7025

FIRST STAGE 1.4 {2345}

2ND STAGE OK, build #76 (20091202)

0.000 - DM7025 board setup
0.002 - initializing PCI...
0.013 - done!
0.015 - fp init
FP version 7 detected
0.102 - ca init
RSA key 1 is used.
0.207 - load config
dCA: not existent, loading defaults
0.790 - config loaded.
* press [S] to enter setup
no CF card detected!
no OLED found!
BOOT #76(20091202)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: ++++ done.

/flash/bootlogo.elf
vscale: 576:576
/flash/vmlinux.gz

LINUX started...
ATI Xilleon 226 (little endian), Solo mode
PCI bus speed is 33MHz
Initializing IRQs
about to enable interrupts!
interrupts enabled.
*Dreambox D M7025

FIRST STAGE 1.4 {2345}
-

2ND STAGE OK, build #76 (20091202)

0.000 - DM7025 board setup
0.002 - initializing PCI...
0.013 - done!
0.015 - fp init
FP version 7 detected
0.102 - ca init
RSA key 1 is used.
0.207 - load config
dCA: not existent, loading defaults
0.790 - config loaded.
* press [S] to enter setup
no CF card detected!
no OLED found!
BOOT #76(20091202)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: ++++ done.

/flash/bootlogo.elf
vscale: 576:576
/flash/vmlinux.gz

LINUX started...
ATI Xilleon 226 (little endian), Solo mode
PCI bus speed is 33MHz
Initializing IRQs
about to enable interrupts!
interrupts enabled.

-------------------------------------------------------------------------------------------------
Bootlog mit Biosänderung - mitloggen :
*
Dreambox D M7025

FIRST STAGE 1.4 {2345}

2ND STAGE OK, build #76 (20091202)
0.000 - DM7025 board setup
0.002 - initializing PCI...
0.013 - done!
0.015 - fp init
FP version 7 detected
0.102 - ca init
RSA key 1 is used.
0.207 - load config
0.786 - config loaded.
* press [S] to enter setup
no CF card detected!
no OLED found!
BOOT #76(20091202)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . | / - \ | / - \ | / - \ | / done.

/flash/bootlogo.elf
vscale: 576:576
/flash/vmlinux.gz

LINUX started...
ATI Xilleon 226 (little endian), Solo mode
PCI bus speed is 33MHz
Initializing IRQs
about to enable interrupts!
interrupts enabled.
Linux version 2.6.12.6 (tux@tux) (gcc version 4.1.1) #1 Sat Jan 23 15:37:13 CET 2010

memsize: 77MB

Xilleon REG value before setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43

Xilleon REG value after setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43

CPU revision is: 00018448

Determined physical RAM map:

memory: 00080000 @ 00000000 (ROM data)

memory: 00080000 @ 00080000 (reserved)

memory: 04c00000 @ 00100000 (usable)

Built 1 zonelists

Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=jffs2 ro

Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.

Primary data cache 16kB, 4-way, linesize 16 bytes.

Synthesized TLB refill handler (20 instructions).

Synthesized TLB load handler fastpath (32 instructions).

Synthesized TLB store handler fastpath (32 instructions).

Synthesized TLB modify handler fastpath (31 instructions).

PID hash table entries: 512 (order: 9, 8192 bytes)

calculating r4koff... CPU frequency 299.68 MHz

Using 149.838 MHz high precision timer.

Console: colour dummy device 80x25

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 72576k/77824k available (3273k kernel code, 5124k reserved, 810k data, 140k init, 0k highmem)

Mount-cache hash table entries: 512

Checking for 'wait' instruction... available.

NET: Registered protocol family 16

Can't analyze prologue code at 804304e0

PCI init - ohwe, ohwe..

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

irq fixup slot 10 vendor 10ec irq 33

TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled

ttyS0 at MMIO 0x0 (irq = 100) is a 16550A

ttyS1 at MMIO 0x0 (irq = 99) is a 16550A

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

8139too Fast Ethernet driver 0.9.27

RTL8139 EEPROM CONTENT: 8129 10ec 8139 10ec 8139 2020 e512 0900 0034 0000

eth0: RealTek RTL8139 at 0x2000, 00:09:34:1b:ba:b5, IRQ 33

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

X226: IDE controller at PCI slot 0000:00:14.1

X226: chipset revision 1

X226: 100% native mode on irq 3

hwif->channel: 0, hwif->index: 0

ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:DMA

init_hwif_xilleon, 0, mate: 00000000

hwif->channel: 0, hwif->index: 1

ide1: BM-DMA at 0x2400-0x2407, BIOS settings: hdc:DMA, hdd:DMA

init_hwif_xilleon, 1, mate: 805380f0

select 1

Trying to free nonexistent resource <00002422-00002422>

Trying to free nonexistent resource <00002410-00002410>

Trying to free nonexistent resource <00002411-00002411>

Trying to free nonexistent resource <00002412-00002412>

Trying to free nonexistent resource <00002413-00002413>

Trying to free nonexistent resource <00002414-00002414>

Trying to free nonexistent resource <00002415-00002415>

Trying to free nonexistent resource <00002416-00002416>

Trying to free nonexistent resource <00002417-00002417>

select 0

Trying to free nonexistent resource <00002422-00002422>

Trying to free nonexistent resource <00002410-00002410>

Trying to free nonexistent resource <00002411-00002411>

Trying to free nonexistent resource <00002412-00002412>

Trying to free nonexistent resource <00002413-00002413>

Trying to free nonexistent resource <00002414-00002414>

Trying to free nonexistent resource <00002415-00002415>

Trying to free nonexistent resource <00002416-00002416>

Trying to free nonexistent resource <00002417-00002417>

select 1

Trying to free nonexistent resource <00002422-00002422>

Trying to free nonexistent resource <00002410-00002410>

Trying to free nonexistent resource <00002411-00002411>

Trying to free nonexistent resource <00002412-00002412>

Trying to free nonexistent resource <00002413-00002413>

Trying to free nonexistent resource <00002414-00002414>

Trying to free nonexistent resource <00002415-00002415>

Trying to free nonexistent resource <00002416-00002416>

Trying to free nonexistent resource <00002417-00002417>

adding dm7025 NAND !

2976 kb/s

6535 kb/s

- NAND PROBE: ad 75 ad 75

NAND device: Manufacturer ID: 0xad, Chip ID: 0x75 (Unknown NAND 32MiB 3,3V 8-bit)

Scanning device for bad blocks

Creating 4 MTD partitions on "NAND 32MiB 3,3V 8-bit":

0x00000000-0x02000000 : "complete"

0x00000000-0x00040000 : "loader"

0x00040000-0x00400000 : "boot partition"

0x00400000-0x02000000 : "root partition"

usbmon: debugs is not available

ohci_hcd 0000:00:14.2: PCI device 1002:4867 (ATI Technologies Inc)

ohci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1

ohci_hcd 0000:00:14.2: irq 2, io mem 0x10000000

usb usb1: Product: PCI device 1002:4867 (ATI Technologies Inc)

usb usb1: Manufacturer: Linux 2.6.12.6 ohci_hcd

usb usb1: SerialNumber: 0000:00:14.2

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

i2c /dev entries driver

Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).

ALSA device list:

No soundcards found.

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP established hash table entries: 4096 (order: 3, 32768 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

NET: Registered protocol family 1

NET: Registered protocol family 17

VFS: Mounted root (jffs2 filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 140k freed

Hello world!
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/unlzma.ko..
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/sqlzma.ko..
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/squashfs.ko..
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher

squashfs: LZMA suppport for slax.org by jro

insmodding /lib/modules/2.6.12.6/kernel/fs/unionfs.ko..
Registering unionfs 1.1.5

insmodding /lib/modules/2.6.12.6/kernel/drivers/block/loop.ko..
loop: loaded (max 8 devices)

mounting mtd...
opening squashfs...
setup loop
mounting squashfs..
mounting unionfs..
pivot_root
mounting devfs..
try umount old devfs..
umount /boot/dev: Device or resource busy
call init!
Algorithmics/MIPS FPU Emulator v1.5

INIT: version 2.86 booting

stb_core: module license 'Proprietary' taints kernel.

read CA...

CA dump:

01 01 03

02 01 02

03 04 00 00 47 5d

04 06 00 09 34 1b ba b5

09 02 01 01

06 08 32 30 30 36 31 31 31 37

07 0f 36 42 31 37 30 33 30 32 30 30 31 38 32 36 39

ff 01 73

read DCA...ok

lcd.o: LCD driver (KS0713) module

LCD detected.

4016118 ms:

141 ms: 31 Starting /etc/rcS.d/S00bootup...

152 ms: 4

210 ms: 12

221 ms: 16

829 ms: 18

mount: Mounting rootfs on / failed: No such file or directory
205 ms: 20

64 ms: 22

193 ms: 24

hdparm: /dev/discs/disc0/disc: No such file or directory
90 ms: 28

hdparm: /dev/discs/disc0/disc: No such file or directory
61 ms: 32

hdparm: /dev/discs/disc0/disc: No such file or directory
159 ms: 34

insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1): File exists
found bootloader defined videomode: 0

SYNC: old: 0 -> new: 1 (requested: 3)

SYNC: old: 0 -> new: 1 (requested: 3)

audio_j1_streamtype_set(0)

init ALSA!

tsmux write 20

tsmux write 20

tsmux write 20

card init

autodetecting NIMs...

CI removed...

Found: Slot A, addr 42, ID: 04 (by CA)

Resetting Slot A

Found: Slot B, addr 42, ID: 04 (by CA)

Resetting Slot B

DVB: registering new adapter (xilleon).

DVB: registering frontend 0 (ST STV0299 DVB-S)...

DVB: registering frontend 0 (ST STV0299 DVB-S)...

insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1): File exists
insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1): File exists
modprobe: failed to load module fp
1877 ms: 44

286 ms: 50

166 ms: 54

73 ms: 62

30 ms: 66

31 ms: 70

VIDEO_CLEAR_BUFFER, c01d48e0, c01d6ec0

MPEG: Sequence header!

CPU 0 Unable to handle kernel paging request at virtual address 00000110, epc == c00a932c, ra == c01b42bc

Oops in arch/mips/mm/fault.c::do_page_fault, line 166[#1]:

Cpu 0

$ 0 : 00000000 10000801 c00b0000 00000000

$ 4 : 00000002 00000001 00000000 00000b09

$ 8 : 00000240 c01d6e70 00001000 30303030

$12 : 81000000 10011580 1000f796 1000f795

$16 : 00000000 c01d48e0 c01d48e0 80128b7c

$20 : 80490000 c01d49d8 c01d2f10 00000000

$24 : cfcfb1b2 c00b0000

$28 : 84428000 84429c10 c01d48e0 c01b42bc

Hi : 00000000

Lo : 00438000

epc : c00a932c avs_setsb+0xc/0x20 [avs] Tainted: P

ra : c01b42bc ovl_set_fullscreen+0x100/0x574 [xilleon]

Status: 10000803 KERNEL EXL IE

Cause : 30800008

BadVA : 00000110

PrId : 00018448

Modules linked in: rfmod dreambox_keyboard dreambox_rc2 xilleon avs cu1216mk3 tu1216 alps_bsbe1 stv0299 alps_bsbe1_c01a lnb_ctrl cifs autofs4 lcd fp stb_core loop unionfs squashfs sqlzma unlzma

Process gmodules.sh (pid: 840, threadinfo=84428000, task=84875020)

Stack : 00000000 80530498 0000000a 80530000 00000001 80531fbc 80530000 c0160000

8012f2e0 00000078 84429c38 84429c38 804fcf00 00000078 10007831 0000f800

c0160000 8447b384 00000000 00000000 00000b09 00000240 00000000 00000000

000002d0 00000240 00000000 c01d48e0 c01d48e0 80128b7c 80490000 c01b74e4

004c998c 00900000 0048d000 c01b4af8 00000000 8015b7ec 00000002 c01d6ec0

...

Call Trace:

[<8012f2e0>] __do_softirq+0x8c/0x14c

[<80128b7c>] printk+0x0/0x30

[<c01b74e4>] xilleon_strmif_linked_fullness+0x0/0x2c [xilleon]

[<c01b4af8>] ovl_update+0x4c/0x168 [xilleon]

[<8015b7ec>] blockable_page_cache_readahead+0x98/0x12c

[<c01b18f0>] mpeg_output_next_frame+0xf4/0x280 [xilleon]

[<c01b19c4>] mpeg_output_next_frame+0x1c8/0x280 [xilleon]

[<8015ba1c>] page_cache_readahead+0xc0/0x29c

[<c01b1b1c>] mpeg_end_of_picture+0xa0/0x160 [xilleon]

[<801519c0>] do_generic_mapping_read+0x798/0xb48

[<c015c164>] fist_dprint_internal+0x0/0xcc [unionfs]

[<c01b224c>] mpeg_handle_irq+0x300/0x9e4 [xilleon]

[<8012f2e0>] __do_softirq+0x8c/0x14c

[<8012f42c>] do_softirq+0x8c/0x94

[<c01b2978>] mpeg0_handle_irq+0x1c/0x2c [xilleon]

[<801159bc>] fpu_emulator_cop1Handler+0x7c/0x1c30

[<c01b9fa8>] fw_interrupt+0xfc/0x154 [xilleon]

[<8010ce98>] timer_interrupt+0x108/0x224

[<8014e874>] handle_IRQ_event+0x7c/0xf0

[<8014ea00>] __do_IRQ+0x118/0x1a8

[<8010149c>] xilleon_irqdispatch_fw+0x24/0x30

[<8010e4a8>] do_cpu+0x214/0x4c8

[<801016c4>] xilleon_irqdispatch+0xa4/0x140

[<8010169c>] xilleon_irqdispatch+0x7c/0x140

[<80100f2c>] xilleonIRQ+0x10c/0x120

[<80107f68>] handle_ri_int+0x20/0x38

Code: 3c02c00b 8c43bb54 3c19c00b <8c650110> ac640118 27399288 03200008 00602021 3c02c00b

Kernel panic - not syncing: Aiee, killing interrupt handler!

so - nun weiß ich nich mehr weiter - hat noch einee einen Tipp?

happy Bytes und frohe Pfingsten an alle Dream´´er

nein im Bios nur die Zeile zum mitloggen geändert ,
und Dchp ausgeschalten

Flash müßte eigentlich noch ok sein-

- NAND PROBE: ad 75 ad 75

NAND device: Manufacturer ID: 0xad, Chip ID: 0x75 (Unknown NAND 32MiB 3,3V 8-bit)

Scanning device for bad blocks

Creating 4 MTD partitions on "NAND 32MiB 3,3V 8-bit":

0x00000000-0x02000000 : "complete"

0x00000000-0x00040000 : "loader"

0x00040000-0x00400000 : "boot partition"

0x00400000-0x02000000 : "root partition"

aber werde es mal testen,
vielen Dank für die vielen Tips -
muß erstmal zur Nachtschicht - man ließt sich - danke nochmal

VideoChip - auwei ?? lohnt sich da eine Reperatur noch ?

Netzteil ist neu gekauft !
Orginalnetzteil für 7025 no Plus !
also kein Umbau erforderlich gewesen .
Spannungen ( im grünen Bereich ? hoffe ich ? ein paar millivolt Differenz)

1.) (rot) 0V
2.) 2,5V
3.) 2,5V
4.) 0V
5.) 3,01V
6.) 0V
7.) 5,02V
8.) 0V
9.) 12V
10.) 12,01V
11.) 0V
12.) 15V
13.) 3,02V
14.) 12V,02

Habe leider keinen Schaltplan gefunden - aber nach sufo scheinen die Spannungen zu stimmem - oder ????

leider gar keins - bleibt alles dunkel

eine Idee ??

danke

Nochmal mit Gemenie 4.7 -
die gleiche Meldung -

Hardware defekt - aber wo ????

Dreambox D M7025
FIRST STAGE 1.4 {2345}
2ND STAGE OK, build #76 (20091202)
0.000 - DM7025 board setup
0.002 - initializing PCI...
0.013 - done!
0.015 - fp init
FP version 7 detected
0.102 - ca init
RSA key 1 is used.
0.207 - load config
0.786 - config loaded.
* press [S] to enter setup
no CF card detected!
no OLED found!
BOOT #76(20091202)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . | / - \ | / - \ | / - \ | / done.

/flash/bootlogo.elf
vscale: 576:576
/flash/vmlinux.gz

LINUX started...
ATI Xilleon 226 (little endian), Solo mode
PCI bus speed is 33MHz
Initializing IRQs
about to enable interrupts!
interrupts enabled.
Linux version 2.6.12.6 (tux@tux) (gcc version 4.1.1) #1 Sat Jan 23 15:37:13 CET 2010

memsize: 77MB

Xilleon REG value before setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43

Xilleon REG value after setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43

CPU revision is: 00018448

Determined physical RAM map:

memory: 00080000 @ 00000000 (ROM data)

memory: 00080000 @ 00080000 (reserved)

memory: 04c00000 @ 00100000 (usable)

Built 1 zonelists

Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=jffs2 ro

Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.

Primary data cache 16kB, 4-way, linesize 16 bytes.

Synthesized TLB refill handler (20 instructions).

Synthesized TLB load handler fastpath (32 instructions).

Synthesized TLB store handler fastpath (32 instructions).

Synthesized TLB modify handler fastpath (31 instructions).

PID hash table entries: 512 (order: 9, 8192 bytes)

calculating r4koff... CPU frequency 299.68 MHz

Using 149.838 MHz high precision timer.

Console: colour dummy device 80x25

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 72576k/77824k available (3273k kernel code, 5124k reserved, 810k data, 140k init, 0k highmem)

Mount-cache hash table entries: 512

Checking for 'wait' instruction... available.

NET: Registered protocol family 16

Can't analyze prologue code at 804304e0

PCI init - ohwe, ohwe..

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

irq fixup slot 10 vendor 10ec irq 33

TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled

ttyS0 at MMIO 0x0 (irq = 100) is a 16550A

ttyS1 at MMIO 0x0 (irq = 99) is a 16550A

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

8139too Fast Ethernet driver 0.9.27

RTL8139 EEPROM CONTENT: 8129 10ec 8139 10ec 8139 2020 e512 0900 0034 0000

eth0: RealTek RTL8139 at 0x2000, 00:09:34:1b:ba:b5, IRQ 33

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

X226: IDE controller at PCI slot 0000:00:14.1

X226: chipset revision 1

X226: 100% native mode on irq 3

hwif->channel: 0, hwif->index: 0

ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:DMA

init_hwif_xilleon, 0, mate: 00000000

hwif->channel: 0, hwif->index: 1

ide1: BM-DMA at 0x2400-0x2407, BIOS settings: hdc:DMA, hdd:DMA

init_hwif_xilleon, 1, mate: 805380f0

select 1

Trying to free nonexistent resource <00002422-00002422>

Trying to free nonexistent resource <00002410-00002410>

Trying to free nonexistent resource <00002411-00002411>

Trying to free nonexistent resource <00002412-00002412>

Trying to free nonexistent resource <00002413-00002413>

Trying to free nonexistent resource <00002414-00002414>

Trying to free nonexistent resource <00002415-00002415>

Trying to free nonexistent resource <00002416-00002416>

Trying to free nonexistent resource <00002417-00002417>

select 0

Trying to free nonexistent resource <00002422-00002422>

Trying to free nonexistent resource <00002410-00002410>

Trying to free nonexistent resource <00002411-00002411>

Trying to free nonexistent resource <00002412-00002412>

Trying to free nonexistent resource <00002413-00002413>

Trying to free nonexistent resource <00002414-00002414>

Trying to free nonexistent resource <00002415-00002415>

Trying to free nonexistent resource <00002416-00002416>

Trying to free nonexistent resource <00002417-00002417>

select 1

Trying to free nonexistent resource <00002422-00002422>

Trying to free nonexistent resource <00002410-00002410>

Trying to free nonexistent resource <00002411-00002411>

Trying to free nonexistent resource <00002412-00002412>

Trying to free nonexistent resource <00002413-00002413>

Trying to free nonexistent resource <00002414-00002414>

Trying to free nonexistent resource <00002415-00002415>

Trying to free nonexistent resource <00002416-00002416>

Trying to free nonexistent resource <00002417-00002417>

adding dm7025 NAND !

2976 kb/s

6535 kb/s

- NAND PROBE: ad 75 ad 75

NAND device: Manufacturer ID: 0xad, Chip ID: 0x75 (Unknown NAND 32MiB 3,3V 8-bit)

Scanning device for bad blocks

Creating 4 MTD partitions on "NAND 32MiB 3,3V 8-bit":

0x00000000-0x02000000 : "complete"

0x00000000-0x00040000 : "loader"

0x00040000-0x00400000 : "boot partition"

0x00400000-0x02000000 : "root partition"

usbmon: debugs is not available

ohci_hcd 0000:00:14.2: PCI device 1002:4867 (ATI Technologies Inc)

ohci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1

ohci_hcd 0000:00:14.2: irq 2, io mem 0x10000000

usb usb1: Product: PCI device 1002:4867 (ATI Technologies Inc)

usb usb1: Manufacturer: Linux 2.6.12.6 ohci_hcd

usb usb1: SerialNumber: 0000:00:14.2

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

i2c /dev entries driver

Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).

ALSA device list:

No soundcards found.

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP established hash table entries: 4096 (order: 3, 32768 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

NET: Registered protocol family 1

NET: Registered protocol family 17

VFS: Mounted root (jffs2 filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 140k freed

Hello world!
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/unlzma.ko..
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/sqlzma.ko..
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/squashfs.ko..
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher

squashfs: LZMA suppport for slax.org by jro

insmodding /lib/modules/2.6.12.6/kernel/fs/unionfs.ko..
Registering unionfs 1.1.5

insmodding /lib/modules/2.6.12.6/kernel/drivers/block/loop.ko..
loop: loaded (max 8 devices)

mounting mtd...
opening squashfs...
setup loop
mounting squashfs..
mounting unionfs..
pivot_root
mounting devfs..
try umount old devfs..
umount /boot/dev: Device or resource busy
call init!
Algorithmics/MIPS FPU Emulator v1.5

INIT: version 2.86 booting

stb_core: module license 'Proprietary' taints kernel.

read CA...

CA dump:

01 01 03

02 01 02

03 04 00 00 47 5d

04 06 00 09 34 1b ba b5

09 02 01 01

06 08 32 30 30 36 31 31 31 37

07 0f 36 42 31 37 30 33 30 32 30 30 31 38 32 36 39

ff 01 73

read DCA...ok

lcd.o: LCD driver (KS0713) module

LCD detected.

4016224 ms:

141 ms: 31 Starting /etc/rcS.d/S00bootup...

152 ms: 4

210 ms: 12

222 ms: 16

779 ms: 18

mount: Mounting rootfs on / failed: No such file or directory
205 ms: 20

64 ms: 22

191 ms: 24

hdparm: /dev/discs/disc0/disc: No such file or directory
139 ms: 28

hdparm: /dev/discs/disc0/disc: No such file or directory
61 ms: 32

hdparm: /dev/discs/disc0/disc: No such file or directory
161 ms: 34

insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1): File exists
found bootloader defined videomode: 0

SYNC: old: 0 -> new: 1 (requested: 3)

SYNC: old: 0 -> new: 1 (requested: 3)

audio_j1_streamtype_set(0)

init ALSA!

tsmux write 20

tsmux write 20

tsmux write 20

card init

autodetecting NIMs...

CI removed...

Found: Slot A, addr 42, ID: 04 (by CA)

Resetting Slot A

Found: Slot B, addr 42, ID: 04 (by CA)

Resetting Slot B

DVB: registering new adapter (xilleon).

DVB: registering frontend 0 (ST STV0299 DVB-S)...

DVB: registering frontend 0 (ST STV0299 DVB-S)...

insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1): File exists
insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1): File exists
modprobe: failed to load module fp
1875 ms: 44

286 ms: 50

164 ms: 54

73 ms: 62

30 ms: 66

31 ms: 70

VIDEO_CLEAR_BUFFER, c01d48e0, c01d6ec0

MPEG: Sequence header!

CPU 0 Unable to handle kernel paging request at virtual address 00000110, epc == c00a932c, ra == c01b42bc

Oops in arch/mips/mm/fault.c::do_page_fault, line 166[#1]:

Cpu 0

$ 0 : 00000000 10000801 c00b0000 00000000

$ 4 : 00000002 00000001 00000000 00000b09

$ 8 : 00000240 c01d6e70 00001000 5f5f5f5f

$12 : 81000000 7efefefc 8100fcfe de5e2021

$16 : 00000000 c01d48e0 c01d48e0 80128b7c

$20 : 80490000 c01d49d8 c01d2f10 00000000

$24 : a0a0dedd c00b0000

$28 : 84428000 84429c10 c01d48e0 c01b42bc

Hi : 00000000

Lo : 00438000

epc : c00a932c avs_setsb+0xc/0x20 [avs] Tainted: P

ra : c01b42bc ovl_set_fullscreen+0x100/0x574 [xilleon]

Status: 10000803 KERNEL EXL IE

Cause : 30800008

BadVA : 00000110

PrId : 00018448

Modules linked in: rfmod dreambox_keyboard dreambox_rc2 xilleon avs cu1216mk3 tu1216 alps_bsbe1 stv0299 alps_bsbe1_c01a lnb_ctrl cifs autofs4 lcd fp stb_core loop unionfs squashfs sqlzma unlzma

Process gmodules.sh (pid: 840, threadinfo=84428000, task=84875020)

Stack : 00021007 c01d48e0 c01d48e0 c01d48e0 00000041 00000001 84429c28 84429c28

c0162aec c015fcc4 84429c38 84429c38 84429c28 00000000 80530000 f1c47030

00000000 80530000 00000000 00000000 00000b09 00000240 00000000 00000000

000002d0 00000240 00000000 c01d48e0 c01d48e0 80128b7c 80490000 c01b74e4

004c998c 00900000 0048d000 c01b4af8 0000000a 80530000 00000002 c01d6ec0

...

Call Trace:

[<80128b7c>] printk+0x0/0x30

[<c01b74e4>] xilleon_strmif_linked_fullness+0x0/0x2c [xilleon]

[<c01b4af8>] ovl_update+0x4c/0x168 [xilleon]

[<c01b18f0>] mpeg_output_next_frame+0xf4/0x280 [xilleon]

[<c01b19c4>] mpeg_output_next_frame+0x1c8/0x280 [xilleon]

[<c01b1b1c>] mpeg_end_of_picture+0xa0/0x160 [xilleon]

[<8010169c>] xilleon_irqdispatch+0x7c/0x140

[<c01b224c>] mpeg_handle_irq+0x300/0x9e4 [xilleon]

[<80100f2c>] xilleonIRQ+0x10c/0x120

[<8051c28c>] ic_bootp_recv+0x530/0x7f4

[<8051c28c>] ic_bootp_recv+0x530/0x7f4

[<801655ec>] do_no_page+0x2d4/0x9b4

[<801656e0>] do_no_page+0x3c8/0x9b4

[<8051c28c>] ic_bootp_recv+0x530/0x7f4

[<8051c260>] ic_bootp_recv+0x504/0x7f4

[<80167944>] handle_mm_fault+0x258/0x660

[<8051c260>] ic_bootp_recv+0x504/0x7f4

[<c01b2978>] mpeg0_handle_irq+0x1c/0x2c [xilleon]

[<801159bc>] fpu_emulator_cop1Handler+0x7c/0x1c30

[<c01b9fa8>] fw_interrupt+0xfc/0x154 [xilleon]

[<8010ce98>] timer_interrupt+0x108/0x224

[<8014e874>] handle_IRQ_event+0x7c/0xf0

[<8014e874>] handle_IRQ_event+0x7c/0xf0

[<8014ea00>] __do_IRQ+0x118/0x1a8

[<8010149c>] xilleon_irqdispatch_fw+0x24/0x30

[<8010e4a8>] do_cpu+0x214/0x4c8

[<801016c4>] xilleon_irqdispatch+0xa4/0x140

[<8010169c>] xilleon_irqdispatch+0x7c/0x140

[<80100f2c>] xilleonIRQ+0x10c/0x120

[<80107f68>] handle_ri_int+0x20/0x38

Code: 3c02c00b 8c43bb54 3c19c00b <8c650110> ac640118 27399288 03200008 00602021 3c02c00b

Kernel panic - not syncing: Aiee, killing interrupt handler!

Woo ,ich habe endlich geschafft -
Bootlog aufgenommen-
aber was sagt mir das ?????

Vorab mal das Ende dann das Ganze Log ??

Code: 3c02c00b 8c43bab4 3c19c00b <8c65001c> ac640024 27399154 03200008 0060
2021 3c02c00b
Kernel panic - not syncing: Aiee, killing interrupt handler!

und hier das komplette Log :

Dreambox DM7025
FIRST STAGE 1.4 {2345}

2ND STAGE OK, build #76 (20091202)

0.000 - DM7025 board setup
0.002 - initializing PCI...
0.013 - done!
0.015 - fp init
FP version 7 detected
0.102 - ca init
RSA key 1 is used.
0.207 - load config
0.786 - config loaded.
* press [S] to enter setup
no CF card detected!
no OLED found!
BOOT #76(20091202)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
vscale: 576:576
/flash/vmlinux.gz

LINUX started...
ATI Xilleon 226 (little endian), Solo mode
PCI bus speed is 33MHz
Initializing IRQs
about to enable interrupts!
interrupts enabled.
Linux version 2.6.12.6 (tux@tux) (gcc version 4.1.1) #1 Fri Dec 11 00:15:33 CET
2009
memsize: 77MB
Xilleon REG value before setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43
Xilleon REG value after setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43
CPU revision is: 00018448
Determined physical RAM map:
memory: 00080000 @ 00000000 (ROM data)
memory: 00080000 @ 00080000 (reserved)
memory: 04c00000 @ 00100000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=jffs2 r
w
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 8192 bytes)
calculating r4koff... CPU frequency 299.68 MHz
Using 149.838 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 72576k/77824k available (3273k kernel code, 5124k reserved, 810k data, 1
40k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Can't analyze prologue code at 804304e0
PCI init - ohwe, ohwe..
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
irq fixup slot 10 vendor 10ec irq 33
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 100) is a 16550A
ttyS1 at MMIO 0x0 (irq = 99) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
8139too Fast Ethernet driver 0.9.27
RTL8139 EEPROM CONTENT: 8129 10ec 8139 10ec 8139 2020 e512 0900 0034 0000
eth0: RealTek RTL8139 at 0x2000, 00:09:34:1b:ba:b5, IRQ 33
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
X226: IDE controller at PCI slot 0000:00:14.1
X226: chipset revision 1
X226: 100% native mode on irq 3
hwif->channel: 0, hwif->index: 0
ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:DMA
init_hwif_xilleon, 0, mate: 00000000
hwif->channel: 0, hwif->index: 1
ide1: BM-DMA at 0x2400-0x2407, BIOS settings: hdc:DMA, hdd:DMA
init_hwif_xilleon, 1, mate: 805380f0
select 1
Trying to free nonexistent resource <00002422-00002422>
Trying to free nonexistent resource <00002410-00002410>
Trying to free nonexistent resource <00002411-00002411>
Trying to free nonexistent resource <00002412-00002412>
Trying to free nonexistent resource <00002413-00002413>
Trying to free nonexistent resource <00002414-00002414>
Trying to free nonexistent resource <00002415-00002415>
Trying to free nonexistent resource <00002416-00002416>
Trying to free nonexistent resource <00002417-00002417>
select 0
Trying to free nonexistent resource <00002422-00002422>
Trying to free nonexistent resource <00002410-00002410>
Trying to free nonexistent resource <00002411-00002411>
Trying to free nonexistent resource <00002412-00002412>
Trying to free nonexistent resource <00002413-00002413>
Trying to free nonexistent resource <00002414-00002414>
Trying to free nonexistent resource <00002415-00002415>
Trying to free nonexistent resource <00002416-00002416>
Trying to free nonexistent resource <00002417-00002417>
select 1
Trying to free nonexistent resource <00002422-00002422>
Trying to free nonexistent resource <00002410-00002410>
Trying to free nonexistent resource <00002411-00002411>
Trying to free nonexistent resource <00002412-00002412>
Trying to free nonexistent resource <00002413-00002413>
Trying to free nonexistent resource <00002414-00002414>
Trying to free nonexistent resource <00002415-00002415>
Trying to free nonexistent resource <00002416-00002416>
Trying to free nonexistent resource <00002417-00002417>
adding dm7025 NAND !
2976 kb/s
6535 kb/s
- NAND PROBE: ad 75 ad 75
NAND device: Manufacturer ID: 0xad, Chip ID: 0x75 (Unknown NAND 32MiB 3,3V 8-bit
)
Scanning device for bad blocks
Creating 4 MTD partitions on "NAND 32MiB 3,3V 8-bit":
0x00000000-0x02000000 : "complete"
0x00000000-0x00040000 : "loader"
0x00040000-0x00400000 : "boot partition"
0x00400000-0x02000000 : "root partition"
usbmon: debugs is not available
ohci_hcd 0000:00:14.2: PCI device 1002:4867 (ATI Technologies Inc)
ohci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:14.2: irq 2, io mem 0x10000000
usb usb1: Product: PCI device 1002:4867 (ATI Technologies Inc)
usb usb1: Manufacturer: Linux 2.6.12.6 ohci_hcd
usb usb1: SerialNumber: 0000:00:14.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39
2005 UTC).
ALSA device list:
No soundcards found.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 140k freed
Hello world!
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/unlzma.ko..
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/sqlzma.ko..
insmodding /lib/modules/2.6.12.6/kernel/fs/squashfs/squashfs.ko..
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
insmodding /lib/modules/2.6.12.6/kernel/fs/unionfs.ko..
Registering unionfs 1.1.5
insmodding /lib/modules/2.6.12.6/kernel/drivers/block/loop.ko..
loop: loaded (max 8 devices)
mounting mtd...
Empty flash at 0x016baf80 ends at 0x016bb000
Empty flash at 0x016bbc18 ends at 0x016bbe00
Empty flash at 0x01a14220 ends at 0x01a14400
Empty flash at 0x01a14820 ends at 0x01a14a00
opening squashfs...
setup loop
mounting squashfs..
mounting unionfs..
pivot_root
mounting devfs..
try umount old devfs..
umount /boot/dev: Device or resource busy
call init!
Algorithmics/MIPS FPU Emulator v1.5
INIT: version 2.86 booting
stb_core: module license 'Proprietary' taints kernel.
read CA...
CA dump:
01 01 03
02 01 02
03 04 00 00 47 5d
04 06 00 09 34 1b ba b5
09 02 01 01
06 08 32 30 30 36 31 31 31 37
07 0f 36 42 31 37 30 33 30 32 30 30 31 38 32 36 39
ff 01 73
read DCA...ok
lcd.o: LCD driver (KS0713) module
LCD detected.
4015697 ms:
142 ms: 31 Starting /etc/rcS.d/S00bootup...
152 ms: 4
211 ms: 12
222 ms: 16
829 ms: 18
mount: Mounting rootfs on / failed: No such file or directory
205 ms: 20
63 ms: 22
jffs2_get_inode_nodes(): CRC failed on node at 0x01a14ddc: Read 0xffffffff, calc
ulated 0xf5143f16
jffs2_get_inode_nodes(): CRC failed on node at 0x01a147dc: Read 0xffffffff, calc
ulated 0x8b6c77b0
jffs2_get_inode_nodes(): CRC failed on node at 0x01a141dc: Read 0xffffffff, calc
ulated 0xa1444fd2
jffs2_get_inode_nodes(): CRC failed on node at 0x016bbbd4: Read 0xffffffff, calc
ulated 0x1237c935
200 ms: 24
hdparm: /dev/discs/disc0/disc: No such file or directory
140 ms: 28
hdparm: /dev/discs/disc0/disc: No such file or directory
61 ms: 32
hdparm: /dev/discs/disc0/disc: No such file or directory
60 ms: 34
insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1
File exists
found bootloader defined videomode: 0
SYNC: old: 0 -> new: 1 (requested: 3)
SYNC: old: 0 -> new: 1 (requested: 3)
audio_j1_streamtype_set(0)
init ALSA!
tsmux write 20
tsmux write 20
tsmux write 20
card init
autodetecting NIMs...
CI removed...
Found: Slot A, addr 42, ID: 04 (by CA)
Resetting Slot A
Found: Slot B, addr 42, ID: 04 (by CA)
Resetting Slot B
DVB: registering new adapter (xilleon).
DVB: registering frontend 0 (ST STV0299 DVB-S)...
DVB: registering frontend 0 (ST STV0299 DVB-S)...
insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1
File exists
insmod: cannot insert `/lib/modules/2.6.12.6/extra/stb-core.ko': File exists (-1
File exists
modprobe: failed to load module fp
1973 ms: 44
287 ms: 50
148 ms: 54
72 ms: 62
31 ms: 66
30 ms: 70
VIDEO_CLEAR_BUFFER, c01d48c0, c01d6ea0
MPEG: Sequence header!
CPU 0 Unable to handle kernel paging request at virtual address 0000001c, epc ==
c00a91f8, ra == c01b428c
Oops in arch/mips/mm/fault.c::do_page_fault, line 166[#1]:
Cpu 0
$ 0 : 00000000 10000801 c00b0000 00000000
$ 4 : 00000002 00000001 00000000 00000b09
$ 8 : 00000240 c01d6e50 00001000 00010000
$12 : 80269d9c 80270000 811cf8a0 c0160000
$16 : 00000000 c01d48c0 c01d48c0 80128b7c
$20 : 80490000 c01d49b8 c01d2ee0 00000000
$24 : 80508a90 c00b0000
$28 : 84162000 84163aa8 c01d48c0 c01b428c
Hi : 00000000
Lo : 00438000
epc : c00a91f8 avs_setsb+0xc/0x20 [avs] Tainted: P
ra : c01b428c ovl_set_fullscreen+0x100/0x574 [xilleon]
Status: 10000803 KERNEL EXL IE
Cause : 30800008
BadVA : 0000001c
PrId : 00018448
Modules linked in: rfmod dreambox_keyboard dreambox_rc2 xilleon avs cu1216mk3 tu
1216 alps_bsbe1 stv0299 alps_bsbe1_c01a lnb_ctrl cifs autofs4 lcd fp stb_core lo
op unionfs squashfs sqlzma unlzma
Process [ (pid: 843, threadinfo=84162000, task=84bef040)
Stack : 00000000 00000078 84163b78 00000078 84163aa0 00000000 80530000 eb6226b4
00000000 80530000 80530000 00000078 84163ba0 00000078 00000000 80530000
84163b94 ffffffff 00000000 00000000 00000b09 00000240 00000000 00000000
000002d0 00000240 00000000 c01d48c0 c01d48c0 80128b7c 80490000 c01b74b4
00000001 00900000 00010000 c01b4ac8 00000000 c0073a2c 00000002 c01d6ea0
...
Call Trace:
[<80128b7c>] printk+0x0/0x30
[<c01b74b4>] xilleon_strmif_linked_fullness+0x0/0x2c [xilleon]
[<c01b4ac8>] ovl_update+0x4c/0x168 [xilleon]
[<c01b18c0>] mpeg_output_next_frame+0xf4/0x280 [xilleon]
[<c01b1994>] mpeg_output_next_frame+0x1c8/0x280 [xilleon]
[<80128b7c>] printk+0x0/0x30
[<c015d810>] __fist_print_dentry+0xbc0/0x1440 [unionfs]
[<c01b1aec>] mpeg_end_of_picture+0xa0/0x160 [xilleon]
[<c0150031>] unionfs_lookup_backend+0x5299/0x7498 [unionfs]
[<c01b221c>] mpeg_handle_irq+0x300/0x9e4 [xilleon]
[<c015c164>] fist_dprint_internal+0x0/0xcc [unionfs]
[<c015cb04>] __fist_print_generic_dentry+0x404/0x524 [unionfs]
[<c015c164>] fist_dprint_internal+0x0/0xcc [unionfs]
[<c01b2948>] mpeg0_handle_irq+0x1c/0x2c [xilleon]
[<c01b9f78>] fw_interrupt+0xfc/0x154 [xilleon]
[<8014e874>] handle_IRQ_event+0x7c/0xf0
[<c015c164>] fist_dprint_internal+0x0/0xcc [unionfs]
[<8014ea00>] __do_IRQ+0x118/0x1a8
[<805049e8>] trap_init+0x10/0x3cc
[<8010149c>] xilleon_irqdispatch_fw+0x24/0x30
[<80128b7c>] printk+0x0/0x30
[<c015d810>] __fist_print_dentry+0xbc0/0x1440 [unionfs]
[<801016c4>] xilleon_irqdispatch+0xa4/0x140
[<80100f2c>] xilleonIRQ+0x10c/0x120
[<801655ec>] do_no_page+0x2d4/0x9b4
[<801656e0>] do_no_page+0x3c8/0x9b4
[<c015c164>] fist_dprint_internal+0x0/0xcc [unionfs]
[<80180000>] alloc_page_buffers+0x3c/0x14c
[<8017ead0>] fput+0x0/0xa0
[<80269d9c>] __up_read+0x0/0x190
[<80270000>] huft_build+0x460/0x600
[<805049e8>] trap_init+0x10/0x3cc
[<80508a90>] build_clear_page+0x580/0x1354
[<80508a80>] build_clear_page+0x570/0x1354
[<80270000>] huft_build+0x460/0x600
[<c0158770>] unionfs_file_release+0x248/0x5e0 [unionfs]
[<8015c780>] kfree+0xa0/0xe8
[<c015c0dc>] add_indent+0x0/0x44 [unionfs]
[<805049e8>] trap_init+0x10/0x3cc
[<8015c6e0>] kfree+0x0/0xe8
[<80160000>] mark_page_accessed+0x3c/0x178
[<c0158770>] unionfs_file_release+0x248/0x5e0 [unionfs]
[<c015c164>] fist_dprint_internal+0x0/0xcc [unionfs]
[<805049e8>] trap_init+0x10/0x3cc
[<8017e86c>] __fput+0x5c/0x2c0
[<8017a294>] filp_close+0x78/0xbc
[<8017a280>] filp_close+0x64/0xbc
[<8010fa20>] stack_done+0x20/0x3c
[<8026ca98>] memset_partial+0x3c/0x6c

Code: 3c02c00b 8c43bab4 3c19c00b <8c65001c> ac640024 27399154 03200008 0060
2021 3c02c00b
Kernel panic - not syncing: Aiee, killing interrupt handler!

Was kann ich da tun ?
Danke

danke - werde es versuchen !!!

happy Bytes

sorry,wie kann ich ein Bootlog machen ???
Kannst Du mir bitte mal kurz erläutern ??
Ganz so bin ich noch nicht bewandert -

Danke Surfer

Bei mir ist es fast genau so -
wie hast du das mitgelockt ??
mit locken geht nicht bei mir -bleibt beim booten hängen -
bis max 3/4 Balken - dann ist Schluß,das Netzteil habe ich schon getauscht,
Spannung steht bei mir wie im 1 post.
Ich habe auch schon verschiedene Image geflascht mit webif und Dreamup,das geht - aber nach dem booten hängt sich die Box auf,Hd und CF habe ich entfernt - weiß nicht maehr weiter-
hat jemand einen Tipp ?????

Dank,super Arbeit !!
aber leider geht die Hd+ Karte mit oscam nicht mehr-
muß da noch was gändert werden ? mit G4.6 und Oscam ging es ??
Hat jemand einen Tipp ?