For those who use the MovieCut plugin the 1.2 version works fine with the Enhanced MovieList. It can be downloaded here:
http://www.dream-multimedia-tv…threadid=4701&page=3&sid=
[v0.96] Enhanced MovieList with VLC stream support (11 available languages)
-
-
-
Zitat
Original von suomipoeka
For those who use the MovieCut plugin the 1.2 version works fine with the Enhanced MovieList. It can be downloaded here:
http://www.dream-multimedia-tv…threadid=4701&page=3&sid=Thanks.
get a error with this one,
This one works great,
MovieCut-1.2 and MovieRetitle-1.2 -
Nachdem dieses plug-in einige Zeit tadellos auf meiner DM800 lief, habe ich jetzt das Problem dass wenn ich Filme in Unterverzeichnisse verschoben habe diese nach einem Restart oder einfach nach einiger Zeit wieder in der ursprünglichen Liste auftauchen (das Verschieben klappt also nicht mehr).
Hat jemand eine Ahnung was da falsch laufen könnte?
-
beim Verschieben reicht es nicht aus, den Balken auf das Zielverzeichnis zu stellen, du muß mit OK in das Verzeichnis rein wechseln.
Erst wenn du die im Zielverzeichnis befindest, das Verschieben auslösen.
Den Fehler hab ich auch schon gemacht.
-
Nein, ich wechsele ins Verzeichnis und drücke dann die grüne Taste um die Operation auszulösen. Das erstaunliche ist auch, dass die Aufnahmen verschoben werden (ein [M] erscheint kurz vor ihrem Namen, und schliesslich verschwinden sie im Zielverzeichnis), aber nach einiger Zeit erscheinen sie wieder im default-Verzeichnis.
-
Zitat
Original von suomipoeka
For those who use the MovieCut plugin the 1.2 version works fine with the Enhanced MovieList. It can be downloaded here:
http://www.dream-multimedia-tv…threadid=4701&page=3&sid=
It doesn't work. I can't find 'Execute cuts' anywhre.My workaround with MovieCut 1.1: I'm starting with [Video] the normal Movielist from Enigma2 and make my cuts. The E.M.L. I'm starting with [Radio].
-
You could enable the debug output from the plugin settings and see how the shell move commands look like. Perhaps that gives some indication what's going wrong.
Hmm.. MovieCut v1.2 worked for me when I tried on Newnigma. Did you restart the GUI after updating the MovieCut plugin?
-
Here's the output from the plug-in:
Code
Alles anzeigen20080725 19:46 [spTasker] /tmp/scrA0.sh += find /hdd/movie -name cifs* | grep -v '.ts' | while read fn do mv $fn $fn.ts done 20080725 19:46 [spTasker] executing /tmp/scrA0.sh find /hdd/movie -name cifs* | grep -v '.ts' | while read fn do mv $fn $fn.ts done 20080725 19:46 [spTasker] sh exec /tmp/scrA0.sh finished, return status = 0 20080725 19:46 [spTasker] /tmp/scrA1.sh += mv "/hdd/movie/20080719 1915 - DISCOVERY HD - Kºstenflug Europa."* "/hdd/movie//" 20080725 19:46 [spTasker] executing /tmp/scrA1.sh mv "/hdd/movie/20080719 1915 - DISCOVERY HD - Kºstenflug Europa."* "/hdd/movie//" 20080725 19:46 [spTasker] sh exec /tmp/scrA1.sh finished, return status = 0
Maybe it is the special characters in the file name, although the status returns no error. Any idea Suomipoeka?
Edit: nope, it's not the special characters, as I moved files with the same ones previously. The plug-in just stoppped working some time ago.
-
Zitat
Original von suomipoeka Verkabelt,
Hmm.. MovieCut v1.2 worked for me when I tried on Newnigma. Did you restart the GUI after updating the MovieCut plugin?
Yes. I have tried all I can do yesterday: GUI restarts, restarts of my 7025, uninstalling M.C 1.1 before installing M.C. 1.2 - nothing is working with my Gemini 3.6. This weekend I make a new Gemini 3.60 test install on my CF card with installing M.C. 1.2 before installing E.M.L. and will report. -
Same problem overhere.
found a nother version on this forum that works fine.
-
I just can't get the move command to work, so my question is: can I move the files manually or are there any files that will have to be changed by doing so?
I wouldn't mind doint it manually as long as my movies will still be properly found.
-
Zitat
Original von debeek
Same problem overhere.found a nother version on this forum that works fine.
Great, this version is working fine. Thank you debeek. -
Zitat
Originally posted by Carbonide
I just can't get the move command to work, so my question is: can I move the files manually or are there any files that will have to be changed by doing so?I wouldn't mind doint it manually as long as my movies will still be properly found.
This is probably some minor issue with the file system flags / ownership, I am sure that it can be resolved.. Have you changed the chmod value in the plugin config? You could try switching between 755 <-> 777. Are you using an internal HDD or a network mounted storage? Are you not able to move any files at all now, even ones with a simple file name? -
Hi Guys,
I am quite a newbie so please excuse if my questions are somehow silly. I just installed Suomipoeka and noticed the following:
1.) I am using Ismail's HD-Skin. The old movie list was shown full-screen, Suomipoeka is only in a small window on the left. Can I fix that somehow or do I have to address this request to Ismail, the skin-author? Would be great to use all the available space in the movie list as well...
2.) I am also using the VLCPlayerExtended, which is working properly. If I select the VLC Server (Win XP) via Suomipoeka, I see the drive letters, but no directories in it.
3.) Is the daily restart function for Enigma influencing timer recordings? Does it reboot even if a recording is running at that time?
Thank you in advance for your help.
greetz,
KA -
I'm using an internal hard disc and I can't move any files, even with very simple names. I also tried to change the permissions to 777, but that didn't help either.
I have no problems copying files to or from the box manually.
-
Zitat
Originally posted by KillerAnt
1.) I am using Ismail's HD-Skin. The old movie list was shown full-screen, Suomipoeka is only in a small window on the left. Can I fix that somehow or do I have to address this request to Ismail, the skin-author? Would be great to use all the available space in the movie list as well...
I don't have access to a DM800 device and I'm not sure what is causing the problem. Is the plugin working fine with other skins?ZitatOriginally posted by KillerAnt
2.) I am also using the VLCPlayerExtended, which is working properly. If I select the VLC Server (Win XP) via Suomipoeka, I see the drive letters, but no directories in it.
Sounds like the Webinferface is not enabled on the VLC player running on the PC. If you can get a file list in the VLC plugin then you should also get a file list in the Enhanced MovieList.ZitatOriginally posted by KillerAnt
3.) Is the daily restart function for Enigma influencing timer recordings? Does it reboot even if a recording is running at that time?
The time window is just for this purpose. The restart is delayed if there are any ongoing recordings. If the recordings fill the whole time window then the restart will not take place until 24 hours later.ZitatOriginally posted by Carbonide
I'm using an internal hard disc and I can't move any files, even with very simple names. I also tried to change the permissions to 777, but that didn't help either.I have no problems copying files to or from the box manually.
You could try running the same move command (that is shown in the plugin debug output) manually via telnet, that way you may get an error message detailing the cause for the problem. -
I'm ashamed as I know now what my error was: when I positioned the cursor on the destination folder I pressed OK to get into that folder, then I pressed the green button to start the move. But as the destination folder was empty, the currently selected line was automatically the parent folder link. So, I actually moved the file to its original location. As the files vanished briefly I thought they were being moved, but they were not.
I apologise for my stupidity and thank you very much not only for your fine plugin, but also for your patience in getting this resolved.
-
That is actually something that should be checked in the code. If the destination for move is the same as the source directory the operation should not be run and maybe some popup dialog should be displayed..
-
Irgendwie funktioniert seit der letzten Version das automatische löschen der erledigten Timer nicht mehr!