[Update 4.18.6/02.02.2024] Plugin Noad:Entfernt Werbeblöcke aus Aufzeichnungen/Removes advertisment

  • Hi Aladin
    Jeep war nur bei Herr der Ringe,hatte ne anderrn Film versucht und es ging


    >>>>>>>> noad start 20171229 1559 - RTL2 - Köln 50667
    *************** noad ***************
    Saturday,30.12.2017 15:51:36 start noad-0.6.0 for /tmp/noad/tmp/20171229 1559 - RTL2 - Köln 50667.rec
    [mpeg2video @ 0xe99710] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xe99710] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xe99710] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xe99710] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xe99710] Invalid frame dimensions 0x0.
    [NULL @ 0xe9fbf0] start time for stream 4 is not set in estimate_timings_from_pts
    [mpegts @ 0xe0c700] PES packet size mismatch
    [mpegts @ 0xe0c700] Could not find codec parameters for stream 2 (Unknown: none ([5][0][0][0] / 0x0005)): unknown codec
    Consider increasing the value for the 'analyzeduration' and 'probesize' options
    [mpegts @ 0xe0c700] Could not find codec parameters for stream 5 (Unknown: none ([11][0][0][0] / 0x000B)): unknown codec
    Consider increasing the value for the 'analyzeduration' and 'probesize' options
    [mpegts @ 0xe0c700] Could not find codec parameters for stream 6 (Unknown: none ([12][0][0][0] / 0x000C)): unknown codec
    Consider increasing the value for the 'analyzeduration' and 'probesize' options
    [swscaler @ 0xea6160] deprecated pixel format used, make sure you did set range correctly
    [mpeg2video @ 0xea1740] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xea1740] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xea1740] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xea1740] Invalid frame dimensions 0x0.
    [mpeg2video @ 0xea1740] Invalid frame dimensions 0x0.
    [NULL @ 0xe9a9c0] start time for stream 4 is not set in estimate_timings_from_pts
    [mpegts @ 0xe0c700] PES packet size mismatch
    [mpegts @ 0xe0c700] Could not find codec parameters for stream 2 (Unknown: none ([5][0][0][0] / 0x0005)): unknown codec
    Consider increasing the value for the 'analyzeduration' and 'probesize' options
    [mpegts @ 0xe0c700] Could not find codec parameters for stream 5 (Unknown: none ([11][0][0][0] / 0x000B)): unknown codec
    Consider increasing the value for the 'analyzeduration' and 'probesize' options
    [mpegts @ 0xe0c700] Could not find codec parameters for stream 6 (Unknown: none ([12][0][0][0] / 0x000C)): unknown codec
    Consider increasing the value for the 'analyzeduration' and 'probesize' options
    [swscaler @ 0xec1970] deprecated pixel format used, make sure you did set range correctly
    [mpegts @ 0xe0c700] PES packet size mismatch
    [mpeg2video @ 0xea1740] ac-tex damaged at 44 33
    [mpeg2video @ 0xea1740] Warning MVs not available
    [mpeg2video @ 0xea1740] concealing 135 DC, 135 AC, 135 MV errors in P frame
    ist das OK ? Noad ist Aktiv
    Gruss
    teufel66

  • Hallo,


    ich habe eine neue Version des Noad Plugins online gestellt. Dieses Version behebt einen Fehler beim patchen einiger Python Dateien bei der Installation.


    Die neue Version ist wie immer unter http://www.aladin25.de zu finden.


    Viele Grüße


    Aladin

  • Hallo,


    gibt es eine Möglichkeit das Aktivieren von Noad als Option beim Timer-Setzen in OpenWebIF /WebControl hinzuzufügen (bei After Event)? Die Dropdown-Liste umfasst nur die 4 Standardwerte...
    Auf der Box direkt funktioniert das ja einwandfrei...


    Danke!

  • Hallo lilies2,


    ich wollte das Patchen der Dateien so klein wie möglich halten. Deshalb gibt es keine Anpassung für das WebIF. Es ist auch nicht vorgesehen.


    Eventuell könntest du über tvinfo mit meinem ipRec Plugin deine Sendungen programieren. Da könntest du noad automatisch starten einschalten.


    Viele Grüße


    Aladin

  • aladin25

    Hat den Titel des Themas von „[Update 4.18.2/06.02.2018] Plugin Noad:Entfernt Werbeblöcke aus Aufzeichnungen/Removes advertisment“ zu „[Update 4.18.3/26.12.2023] Plugin Noad:Entfernt Werbeblöcke aus Aufzeichnungen/Removes advertisment“ geändert.
  • Hallo,


    ich habe gerade neue NoAd Versionen für die dm7080, dm900, dm920,dm one und dm two hochgeladen.


    Viele Grüße


    Aladin


    PS.: Die neuen Versionen sind auf…

    [link entfernt - da andere Website angesteuert wird] …zu finden.

  • Hallo

    Habe mir das newenigma 2 2.5 geladen

    Und Noad installiert. Nach einer Aufnahme wollte ich dann Noad starten und den Status mit der Menü Taste aufrufen. Er sagte mir sofort Noad ist fertig , ohne das etwas passiert ist . Kennst jemand das Problem ?

    Gruss

    Teufel 66

  • Frag einfach mal im Board deines Images …

    Und das heisst newnigna und nicht newenigma


    … vielkeicht hast du deswegen das entsprechende Heim-Board nicht gefunden 😜

    | 2 x 920 ULTRA HD | 2 x TWO | 7080 HD| 8000 HD | 7020 HD V2 | 800 HD SE V2 |
    |GP 4.2 & GP 3.2 & GP 3 @ DREAMOS & DMM-Experimental | on all Boxes
    | Hdd : | 2 x 4 TB :tired_face: 1 TB | Qnap - 8 TB |... and some more space everywhere

    WaveFrontier T 90 : | Hotbird 13 ° | Astra 19,2° | Astra 23,5° | Astra/Eurobird 28,2°/28,5° |
    ........... and happy :winking_face:


    Hier werden Sie geholfen : Gemini Project WIKI sowie Video Tutorials

  • Ohne log wird man dir auch schwer helfen können.

    Das es bei uns sein soll, oder eben auch bei Newnigma2


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert

  • Wenn libavcodec, libavformat, libavutil nicht angezeigt werden müssen diese installiert werden.


    Gib dafür die folgenden Befehle ein:


    apt-get install libavcodec

    apt-get install libavformat

    apt-get install libavutil

    apt-get install libswscale


    Viel Erfolg


    Aladin

  • Hallo

    Danke für die Antworten.

    Habs gerade noch mal neu installiert jetzt kommt die Meldung wartend auf Noad nichts passiert.

    Gruß