ZitatAlles anzeigenOriginal von einstain
cwusel,
mach mal http auf port 3001 von deiner box, dort ist newcs (normalerweise)
du kennst dich ja mit linux aus.
dann telnet mal auf die box, laufen die evo und newcs-prozesse ??
(ps -ef)
dann kill -9 mal alle, starte erst newcs von der commandline, dann evo und sieh dir mal den output an.
wenn dir da fehlermässig nichts auffällt, machen wir weiter ..
/einstain
Hier mal mein log:
**************************
* *
* The Gemini Project *
* *
**************************
OpenDreambox 1.8.0 dm7025
dm7025 login: root
root@dm7025:~# ps -ef
PID Uid VmSize Stat Command
1 root 656 S init [3]
2 root SWN [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kthread]
6 root SW< [kblockd/0]
9 root SW [khubd]
46 root SW [pdflush]
47 root SW [pdflush]
49 root SW< [aio/0]
631 root SW [kseriod]
48 root SW [kswapd0]
651 root SW [mtdblockd]
662 root SW [pktgen/0]
663 root SWN [jffs2_gcd_mtd3]
745 root SW [kjournald]
841 root SW< [ci]
1003 root 804 S udhcpc -b -p /var/run/udhcpc.eth0.pid -i eth0
1113 root 748 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host
1126 root 732 S /usr/sbin/inetd
1347 root 728 S /bin/sh /usr/bin/enigma2.sh
1398 root 1188 S /usr/bin/gdaemon
1400 root 26700 S /usr/bin/enigma2
1405 root 26700 S /usr/bin/enigma2
1415 root 26700 S /usr/bin/enigma2
1427 root 26700 S N /usr/bin/enigma2
1423 root SW [kdvb-fe-0]
1559 root 1936 S /usr/bin/evocamd_2.11
1567 root 1936 S /usr/bin/evocamd_2.11
1568 root 1936 S /usr/bin/evocamd_2.11
1611 root 584 S telnetd
1612 root 972 S -sh
1617 root 852 R ps -ef
root@dm7025:~#
... der newcs scheint nicht zu laufen...?