New Webbrowser Konqueror/Embedded ... erster (vorsichtiger) Test ...

    • Offizieller Beitrag
    Zitat

    Original von mauce


    Thanks for your reply, but..
    I realize that and I enabled swap but that is not related to the problem I have.
    When I start the plugin I get redirected back to the plugin-list in the same second.


    Seddi I would be nice when you have some ideas.....


    I know the thread is long, but try to read it. That problem has been discussed lot of times within here. Mostly there are some rights missing. On the first or second page of this thread I posted how to start the konqueror via telnet (you have to set some environment variables first) and there you will become an error message which helps to solve the problem.

  • Zitat

    Original von Seddi


    I know the thread is long, but try to read it. That problem has been discussed lot of times within here. Mostly there are some rights missing. On the first or second page of this thread I posted how to start the konqueror via telnet (you have to set some environment variables first) and there you will become an error message which helps to solve the problem.


    You are right, I apologize for not reading the thread properly.
    But now I think I know why it's not working in Pli Flubber: it's because I need a different libc.so.6


    Apparently Pli Flubber has a different version of GLIBC.


    Can someone point me to a place were I can get a different version of libc.so.6?


    Thanks in advance

  • ok ok


    After I tried lots and lots of things to get this to work on Pli Flubber it's all fine except for one issue. I hope someone (maybe Seddi) has the solution.


    At this moment the browser works fine and even de DM keyboard works.
    But to make the keyboard working I have to set the paramenter DREAMKEYBOARD=0.
    - When it's set to '1' the mouse/jog on the keyboard works fine but the keys don't work.
    - When it's set to '0' the mouse/jog Y-axis is inverted and the keys work fine.


    So at this moment I set it to '0' so I can type URLs.
    Is there another way than the DREAMKEYBOARD parameter to inverse the Y-axis?

  • Hallo zusammen ,
    bin am verzweifeln


    habe ein 7000 mit 120 platte + 256 usb
    und Dream Tastatur


    habe alles versucht ohne erfolg.
    Frage ? ist es den nicht möglich einen image mit lauffähigen Browser
    Hier rein zustellen?
    Man kann doch bestimmt ein Image wo der Browser schon läuft abspeichern und ins netz stellen.


    Danke im Voraus

    • Offizieller Beitrag

    mauce
    Sorry, some time ago there some changes were made to the drivers for the 7020. So the dreamkeyboard gets another event node and the old detection routine I use doesnt work anymore. So I had to get hands on this .... sorry, it could take some time.
    You can even try one thing: Boot your Box without any other hid device (mouse,keyboard, joxstick) sticked into the usb slot. If you have e.g. an usb joystick plugged in while you boot the box, the joystick will get event0 instead of the dreamkeyboard which should get event0.
    ---
    Leider hat sich neulich was bei den Treibern für die 7020 geändert und das Keyboard nutzt nun andere Device-Nodes, so dass die alte "Erkennungsroutine" nicht mehr funktioniert. Muss ich irgendwann mal Hand anlegen ...


    alois
    Der Konqueror passt nun mal in kein Image rein :winking_face: Und mit Ausnahme von dem Tastaur/Maus HeckMeck auf der 7020 die "mauce" angesprochen hat, sollte es eigentlich schon möglich sein das ganze zum laufen zu bekommen und der Aufwand ist nicht so gross. Jeder stolperstein den es gibt, wurde in diesem Thread bestimmt schon 10mal besprochen.


    Ausserdem ist das ganze mehr als Spielerei zu betrachten, da es a) relativ langsam ist das ganze und b) heutzutage Webseiten mit einer auflösung von 640x480 zu betrachten auch nicht gerade der Bringer ist. Deswegen werde ich mich mit der Browserthematik auch erst wieder richtig beschäftigen, wenn die 8000er da ist. Da wir hier dann eine Ordentliche Bildschirmauflösung haben und das ganze Sinn macht.

  • Hallo,


    Testumgebung: DM7020S, Swap 32 MB, Gemini 3.0.
    Konq installiert, wie auf den ersten Seiten beschrieben.
    Von Hand gestartet mit allen Exports.
    Ergebnis:
    root@dm7020:~# /hdd/konq/konqueror -qws --big-images --sysfont::15
    Segmentation fault


    Libc.so.6 wie von Seddi gepostet nach /hdd/konq/lib kopiert.
    Ergebnis:
    /hdd/konq/konqueror: /hdd/konq/lib/libc.so.6: version `GLIBC_2.3.4' not found (required by /lib/libpthread.so.0)


    Jemand eine Idee,was man man machen kann? I ran out of ideas.


    Gruß Mamba

    checking for long long... yes
    checking for long double... yes
    +++ Divide By Cucumber Error. Stopping. +++

  • Zitat

    Original von Imhotep


    ok bin nicht Seddi, allerdings kann ich bestätigen, dass man auch auf USB installieren kann!
    Hatte es damals allerdings noch mit Gemini 2.7 versucht!



    weisst du noch wie das gegangen ist ??

    • Offizieller Beitrag
    Zitat

    Original von JackDaniel



    weisst du noch wie das gegangen ist ??


    Das konq Verzeichnis von hdd auf usb schieben, die Dateien konqstart.so/konqstart.cfg müssen unter /var/tuxbox/plugins bleiben und die Datei
    konqueror.cfg unter /var/tuxbox/config . Und Genau diese (/var/tuxbox/config/konqueror.cfg) musst du editieren und den neuen Pfad eintragen, den du nun hast (usb).

    • Offizieller Beitrag


    Könnte hierfür mal einer eine aktuelle (Gemini 3.1) libc.so.6 von seiner 7020er hochladen ? Die libc die hier angehängt ist im Thread ist inzwischen zu alt und die libc auf den 7000er Boxen ist zu weit runtergestripped. Es kann aber die libc.so.6 der 7020 eingesetzt werden, die muss einfach nach /hdd/konq/lib kopiert werden. Ich habe gerade kein aktuelles Image auf der 7020 drauf ud kann die Datei daher auf die schnelle nicht anbieten ...

    • Offizieller Beitrag

    Thanks mauce ...


    I have renamed the file to libc.so.6 and attached it here.


    Ok, hab die Datei von mauce umbenannt und hier angehängt. Die Datei (vorher entpacken nicht vergessen, habs ge-rar-t !) einfach nach /hdd/konq/lib kopieren.

  • Zitat

    Original von Seddi
    . Die Datei (vorher entpacken nicht vergessen, habs ge-rar-t !) einfach nach /hdd/konq/lib kopieren.


    I already tried that (in Pli Flubber) but that didn't work for me.
    Konqueror wouldn't work with that....

  • Zitat

    Original von Seddi
    Das konq Verzeichnis von hdd auf usb schieben, die Dateien konqstart.so/konqstart.cfg müssen unter /var/tuxbox/plugins bleiben und die Datei
    konqueror.cfg unter /var/tuxbox/config . Und Genau diese (/var/tuxbox/config/konqueror.cfg) musst du editieren und den neuen Pfad eintragen, den du nun hast (usb).


    genau das hab ich schon probiert
    aber dann startet es nicht mehr :frowning_face:
    mein eintrag in der config sieht so aus


    # Installationsverzeichnis OHNE abschliessenden /
    KONQDIR=/usb/konq
    und /var/mnt/usb/konq hab ich auch schon probiert

    dau bleibt dau, daran kann der beste dev nichts ändern<br><br>

    2 Mal editiert, zuletzt von JackDaniel ()

    • Offizieller Beitrag

    Die Frage ist, wo dein USB Stick gemountet ist und welchen Pfad du dann hast, wenn dieser in der config stimmt, dann funktioniert das auch.

  • Zitat

    Original von Seddi
    Die Frage ist, wo dein USB Stick gemountet ist und welchen Pfad du dann hast, wenn dieser in der config stimmt, dann funktioniert das auch.


    standart mounts von gemini 3.1
    habs jetzt auch noch beim tuxfrodo c64 probiert,mit /var/mnt/usb/c64emu/games/ sehe ich die spiele aber der emulator lässt sich mit /var/mnt/usb/c64emu/ auch nicht starten :frowning_face:

    • Offizieller Beitrag

    Beim Tuxfrodo gibts auch ne bseonderheit, da darf man nur das Games Verzeichnis auslagern, siehe Howto:
    http://www.tuxfrodo.de/hecms.p…301727;pos1=2;pos2=3#kap3


    Ansonsten sorry, meine Box weiss nicht was ein USB Stick ist. Meine Images sind im Flash wo sie hin gehören und brauche auch sonst keine Stick (halte persönlich die ganze Stickererei für Schwachfug, ist aber ein anderes Thema). Hab ich also absolut keine Erfahrung mit.


    //EDIT
    Was mir noch einfällt: Die cfg Dateien NIEMALS mit einem Windoof Editor bearbeiten, ansonsten fliegt dir das Teil um die Ohren und nix geht mehr ...

  • Hi Seddi,


    habe die libc von G3.1 nach /hdd/konq/lib kopiert (nat. unrar'd).
    Tut nicht. Es kommt wieder der oben beschrieben "Segmentation Fault".


    Der Grund scheint woanders zu liegen ...


    Gruß Mamba

    checking for long long... yes
    checking for long double... yes
    +++ Divide By Cucumber Error. Stopping. +++