Ok, muss es in ext4 formatiert sein oder geht es auch anderst?
Die ist Fat32
Ok, muss es in ext4 formatiert sein oder geht es auch anderst?
Die ist Fat32
ich nehme immer FAT32.
Aber wie ich dir schon geschrieben habe, wird bei der Installation von Android eh alles neu Formatiert. Also eigentlich egal.
Hallo Emanuel,
jetzt hat es geklappt. Vielen Dank 😊
Habe aber noch fragen.
1. wie bekomme ich das Aquarium Bildschirm hin? Google Play geht nicht!
2. kann man auch wechseln von Androiden zum normalen TV?
3. was hast du installier damit oben das Wetter angezeigt wird?
Vielen lieben Dank!
Hallo,
kann jemand noch helfen?
Bei was denn genau?
Google Play geht schon wenn man es richtig angemeldet hat
Dir Apps Downloaden und installieren ? ,das musst du schon selber
TV wechseln ? was meinste damit ? Entweder du startest Android und schaust da fern (über eine app ) Tuner der aktiven Box geht aber nicht ,musst eine andere Box einbinden in Dreamdroid zb.
Wechseln zwischen Android und e2 geht per gboot
Wetter da hab ich eine Wetterapp installiert und halt ein Widget auf den Desktop gelegt so wie man das auch am Handy macht usw.
Alles das steht hier im Thread und vieles mehr ,wobei soll man dir also helfen ,beim vorlesen des Threads?
Bitte lest den support Thread und wie man etwas im Android benutzt das sollte man schon wissen wenn man Android nutzt.
Play Store App habe ich installiert. Wo kann man sich anmelden?
Das steht hier alles im Thread ,sogar auf den ersten Seiten lies ihn endlich dann muss man auch nicht 1000x das selbe beantworten und fragen.
Und hier RE: Gemini Android 9 [AOSP] nochmal eines der Beiträge verlinkt wo das steht in dem Thread ,ich kann es auch noch vorlesen wenn man keine Lust hat den support Thread auch nur Ansatzweise mal zu lesen.
Ich frage mich für was wir eigentlich hier einen support Thread machen wenn du ihn nicht liest ,wir haben klar auch Freizeit verdient oder? und müssen nicht alles 100x wiederholen weil es User gibt die nicht gewillt sind auch die support Threads sich mal durchzulesen.
Danke, vorlesen brauchst nicht. Wo finde ich die device+id.apk zum installieren? Die ist wie auf dem Film nicht drauf
Eigentlich will ich darauf nicht antworten ,es steht genau in dem verlinkten Beitrag ,das hat emanuel doch hingeschrieben ,mehr sag ich nicht dazu.
Habe es installiert. Aber nicht gefunden
keine Ahnung, hatte diese Meldung nicht.
Hallo,
da es nicht mit der google play store app klappt fange ich nochmal von vorne an.
Kann es jemand bitte korrigieren falls es falsch ist?
1. wenn möglich formatiere deine SD Karte am PC in (ext4 oder ext3), dann in die Dreambox einstecken
2. verbinde dich mit einem FTP Programm mit der Dreambox One
3. kopiere die Datei android9-sdcard_android9-sdcard_20190920.tar.gz.md5 in den Ordner /data
4. verbinde dich zb mit Putty auf die Dreambox
5. melde dich an
6. dann: cd /data
7. dann: tar -xzvf android9-sdcard_09202019.tar.gz -C / (stimmt das)
8. dann: cd /data/android
9. dann: ./flash_all_sd.sh /dev/mmcblk1
10. dann: reboot
Was muss hier noch installiert werden?
android9-sdcard_20190920.tar
android9-sdcard.tar
gapps-dreamos_20190925.tar
gapps-dreamos-20190925-2.tar
gapps.sh
Das hier auch??
Gapps manuell laden!
https://sourceforge.net/projec…arm-9.0-pico-20190924.zip
zip kommt nach /data/android/gapps
Vielen dank nochmals für eine hilfe.
Warum in /data ???
Es steht doch ausdrücklich im erste Beitrag wo es abgelegt werden sollte. In /
Damit stimmt dann die weitere folgliche Befehle.
Ändert man das ablageort, muss das Befehl geändert werden.
Also Punkt 3. /tmp??
hi , anyone tried on dreambox two ?
i did these 2 steps and went fine but when reboot android does not start it start normal
Install new / all:
root @ dreamone: ~ # tar -xzvf android9-sdcard.tar.gz -C /
root @ dreamone: ~ # cd / data / android
root @ dreamone: / data / android # ./flash_all_sd.sh / dev / mmcblk1
root @ dreamone: / data / android # reboot
#################################################
Update only (apps and data are untouched):
root @ dreamone: ~ # tar -xzvf android9-sdcard_09202019.tar.gz -C /
root @ dreamone: ~ # cd / data / android
root @ dreamone: / data / android # ./update_sd.sh / dev / mmcblk1
root @ dreamone: / data / android # reboot
The android 9 works just as well on the dreambox two as it does on the dreambox one. There is no difference. It's best to make a boot log, then you can see more. Best of all without an upgrade first. The sd carte must be recognized, that is the most important thing.
tks emanuel
these are the steps i am doing:
send android file to root
tar -xzvf android9-sdcard_20190920.tar.gz -C /
cd /data/android
./flash_all_sd.sh /dev/mmcblk1
reboot
after reboot the box start normal without android,
i noticed in media folder all files exist there:
boot / cache / data / metadata / product / vendor
and mmcblk1p1 = empty
mmcblk1p2 = has files
in storage devices = nothing detected
but in blue panel device manager i can see the card.
i use samsung evo 32 gb
root @ dreambox: ~ # tar -xzvf android9-sdcard.tar.gz -C /
data /
data / android /
data / android / bootlogo.bmp
data / android / odm.img
gzip: skipping: <stdin>: corrupted - incomplete deflate data
gzip: abort: internal threads error
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
root @ dreambox: ~ #
is this okay ???
root @ dreambox: ~ # cd / data / android
root @ dreambox: / data / android # ./flash_all_sd.sh / dev / mmcblk1
Dreambox Android flash all sdcard script
Running from: / data / android
Umounting device ...
Done
Partitioning / dev / mmcblk1 device ...
Checking that no-one is using this disk right now ... OK
Disk / dev / mmcblk1: 29.8 GiB, 32010928128 bytes, 62521344 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical / physical): 512 bytes / 512 bytes
I / O size (minimum / optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x36e810a4
Old situation:
Device Boot Start End Sectors Size Id Type
/ dev / mmcblk1p1 2048 1050623 1048576 512M c W95 FAT32 (LBA)
/ dev / mmcblk1p2 1050624 3672064 2621441 1.3G 83 Linux
/ dev / mmcblk1p3 3674112 4722688 1048577 512M 83 Linux
/ dev / mmcblk1p4 4724736 62521343 57796608 27.6G 5 Extended
/ dev / mmcblk1p5 4726784 4988928 262145 128M 83 Linux
/ dev / mmcblk1p6 4993024 5255168 262145 128M 83 Linux
/ dev / mmcblk1p7 5259264 5394432 135169 66M 83 Linux
/ dev / mmcblk1p8 5398528 5660671 262144 128M 83 Linux
/ dev / mmcblk1p9 5662720 62521343 56858624 27.1G 83 Linux
>>> Created a new DOS disklabel with disk identifier 0x468312c9.
/ dev / mmcblk1p1: Created a new partition 1 of type 'W95 FAT32 (LBA)' and of size 512 MiB.
Partition # 1 contains a vfat signature.
/ dev / mmcblk1p2: Created a new partition 2 of type 'Linux' and of size 1.3 GiB.
Partition # 2 contains an ext4 signature.
/ dev / mmcblk1p3: Created a new partition 3 of type 'Linux' and of size 512 MiB.
Partition # 3 contains an ext4 signature.
/ dev / mmcblk1p4: Created a new partition 4 of type 'Extended' and of size 27.6 Gi B.
/ dev / mmcblk1p5: Created a new partition 5 of type 'Linux' and of size 128 MiB.
Partition # 5 contains an ext4 signature.
/ dev / mmcblk1p6: Created a new partition 6 of type 'Linux' and of size 8.8 MiB.
Partition # 6 contains an ext4 signature.
/ dev / mmcblk1p7: Created a new partition 7 of type 'Linux' and of size 66 MiB.
/ dev / mmcblk1p8: Created a new partition 8 of type 'Linux' and of size 128 MiB.
/ dev / mmcblk1p9: Created a new partition 9 of type 'Linux' and of size 27.2 GiB.
/ dev / mmcblk1p10: Done.
New situation:
Device Boot Start End Sectors Size Id Type
/ dev / mmcblk1p1 2048 1050623 1048576 512M c W95 FAT32 (LBA)
/ dev / mmcblk1p2 1050624 3672064 2621441 1.3G 83 Linux
/ dev / mmcblk1p3 3674112 4722688 1048577 512M 83 Linux
/ dev / mmcblk1p4 4724736 62521343 57796608 27.6G 5 Extended
/ dev / mmcblk1p5 4726784 4988928 262145 128M 83 Linux
/ dev / mmcblk1p6 4993024 5010987 17964 8.8M 83 Linux
/ dev / mmcblk1p7 5013504 5148672 135169 66M 83 Linux
/ dev / mmcblk1p8 5152768 5414911 262144 128M 83 Linux
/ dev / mmcblk1p9 5416960 62521343 57104384 27.2G 83 Linux
The partition table has been altered.
Calling ioctl () to re-read partition table.
Syncing disks.
Done
Waiting for automount
Done
Umounting device ...
Done
Formatting boot partition ...
Done
Formatting metadata partition ...
mke2fs 1.43.4 (31-Jan-2017)
Creating filesystem with 131072 1k blocks and 32768 inodes
Filesystem UUID: 2468dd99-769c-4f29-adb1-4f502577a9d5
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
Done
Formatting data partition ...
mke2fs 1.43.4 (31-Jan-2017)
Creating filesystem with 7138048 4k blocks and 1785856 inodes
Filesystem UUID: 3c1ea1ea-2b89-4af1-a131-73a021849d56
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
Done
Dumping system image ...
160 + 0 records in
160 + 0 records out
1342177280 bytes (1.3 GB, 1.2 GiB) copied, 102.501 s, 13.1 MB / s
Done
Dumping vendor image ...
64 + 0 records in
64 + 0 records out
536870912 bytes (537 MB, 512 MiB) copied, 40.8821 s, 13.1 MB / s
Done
Dumping product image ...
16 + 0 records in
16 + 0 records out
134217728 bytes (134 MB, 128 MiB) copied, 11.0303 s, 12.2 MB / s
Done
Dumping odm image ...
1 + 1 records in
1 + 1 records out
9197056 bytes (9.2 MB, 8.8 MiB) copied, 0.771355 s, 11.9 MB / s
Done
Dumping cache image ...
8 + 1 records in
8 + 1 records out
69206016 bytes (69 MB, 66 MiB) copied, 6.16859 s, 11.2 MB / s
Done
Copying boot files ...
Done
root @ dreambox: / data / android #reboot
Alles anzeigen
any help why not starting on android after reboot , what is wrong i am doing
A bootlog with e.g. with putty would be helpful. We could see whether it is due to the sdcard or whether it is due to the uboot env.
connect box via miniusb dev to pc
e.g. using putty:
Select the menu item "Connection -> Serial" and set the correct COM port (previously seen in the device manager)
Set speed to 115200
Data bits are given the value 8
Stop bits have the value 1
Set parity to NONE
In the menu item "Session-> Logging" on the right, select the value "All session output" and select the file
Finally press the "Open" button
zur Zeit sind 32 Mitglieder (davon 6 unsichtbar) und 1.998 Gäste online - Rekord: 5.681 Benutzer ()