dvbtee for mipsel und armhf

[10:15 root@dm900 dvbtee] > ./dvbtee -h
# dvbtee v0.6.3 - http://github.com/mkrufky/libdvbtee


built against libdvbpsi version 2.0.0


11 table decoders present: 0x00 0x02 0x40 0x42 0x4e 0x70 0xc7 0xc8 0xcb 0xcc 0xcd
10 descriptor decoders present: 0x0a 0x48 0x4d 0x4e 0x62 0x81 0x83 0x86 0xa0 0xa1


  -a    adapter id
  -A    (1 for ATSC, 2 for ClearQAM)
  -b    display bitrates & statistics
  -c    channel to tune /
        comma (,) separated list of channels to scan /
        scan minimum channel
  -C    channel to tune /
        comma (,) separated list of channels to scan /
        scan maximum channel
  -f    frontend id
  -F    filename to use as input
  -t    timeout
  -T    number of tuners (dvb adapters) allowed to use, 0 for all
  -s    scan, optional arg when using multiple tuners: 
        1 for speed, 2 for redundancy, 
        3 for speed AND redundancy, 
        4 for optimized speed / partial redundancy
  -S    server mode, optional arg 1 for command server, 
        2 for http stream server, 3 for both
  -i    pull local/remote tcp/udp port for data
  -n    bind to a specific network interface
  -I    request a service and its associated PES streams by its service id
  -E    enable EPG scan, optional arg to limit the number of EITs to parse
  -e    enable ETT extended text tables (EPG descriptions, ATSC only)
  -o    output filtered data, optional arg is a filename / URI, ie udp://127.0.0.1:1234
  -O    output options: (or-able) 1 = PAT/PMT, 2 = PES, 4 = PSIP
  -H    use a HdHomeRun device, optional arg to specify the device string
  -j    enable json output of decoded tables & descriptors
  -d    debug level
  -q    quiet most logging
  -h    display additional help


To tune to service id 1 of physical channel 33 and stream it to a udp port:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -c33 -I1 -oudp://192.168.1.100:1234


To tune the second frontend of adapter 1 and stream the full TS of physical channel 44 to a tcp listener:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -c44 -otcp://192.168.1.200:5555


To listen to a TCP port and stream to a UDP port:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -itcp://5555 -oudp://192.168.1.100:1234


To parse a captured file and filter out the PSIP data, saving the PAT/PMT and PES streams to a file:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -Finput.ts -O3 -ofile://output.ts


To parse a UDP stream for ten seconds:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -iudp://127.0.0.1:1234 -t10


To scan for ClearQAM services using 5 tuners optimized for speed and partial redundancy:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -A2 -T5 -s4


To scan for ATSC services using 2 HdHomeRun tuners optimized for speed and redundancy:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -A1 -H -T2 -s3


To start a server using adapter 0:
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -a0 -S


To start a server using tuner1 of a specific HdHomeRun device (ex: ABCDABCD):
  /ba/comp/libdvbtee/dvbtee/.libs/lt-dvbtee -H ABCDABCD-1 -S