• QTS Update...


    QTS 4.3.4.0483 build 20180213


    [Important Notes]
    - To learn about the latest changes for x86-based models in this QTS build, see the [Fixed Issues] section below.
    - To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
    - As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
    - Users can now downgrade QTS on ARM-based models. To downgrade to the target version, first downgrade to QTS 4.3.3.0351 Build 20171023 (or later versions).
    - QTS 4.3.4 is the final available firmware update for the following models:
    TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
    - For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
    - When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
    - Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
    - Below are the kernel versions for the NAS models supported by QTS 4.3.4.0479:
    kernel 2.6: TS-269H
    kernel 3.10.20: TS-128, TS-228
    kernel 3.2.26: TS-x31, TS-x31U
    kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
    kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73


    [New Features]
    - Added support for License Center, an integrated user interface that enables users to manage and purchase licenses. To open License Center, go to ""Control Panel"" > ""System"" > ""License Center"".
    Note: License Center uses a new authorization mechanism. Licenses that are purchased from QNAP Store only support QTS 4.3.4.0483 and later versions. Users can choose to keep existing licenses or convert them to the new format.
    - Added support for QNAP Store, a website where users can purchase licenses.
    Note: Licenses that are purchased from QNAP Store only support QTS 4.3.4.0483 and later versions.
    - Users can now activate a beep alarm or blink LED indicators to quickly locate the NAS. To use this feature, go to "QTS Desktop" > "Toolbar" > "Options" > "Locate my NAS".
    - Users can now specify their regions. System services are localized for the selected region. To select a region, go to "Control Panel" > "System" > "General Settings" > "Region".
    - Updated the user interface of McAfee Antivirus to provide support for QTS License Center.
    Note: To work with License Center, McAfee must be updated to 2.0.0.
    - Added support for Web Services Dynamic Discovery (WS-Discovery) so that File Explorer in Windows 10 can display NAS device names.



    [Enhancements]
    - Removed the "My License" section from App Center. License management features are now integrated into "License Center".
    - Added a note to remind users that enabling Remote Desktop may affect the playback quality of local videos.



    [Fixed Issues]
    - File Station would take a long time to search for keywords through a large number of files.
    - Network connection errors would occur when users kept downloading torrent files via the 10 Gigabit Ethernet port.
    - QTS would unmount certain volumes when the NAS restarted after users updated QTS to 4.3.4.0435 Build 20171230.
    - Users would not be prompted for a security code when they logged on to QTS via SmartURL even if 2-step verification was enabled.
    - Users could not select the disks no.9 to no.12 when creating an SSD cache on the TS-1263U.
    - After users converted a thick volume to a thin volume, Storage & Snapshots would incorrectly show the usage of the volume as 100% allocated.
    - Storage & Snapshots would display an incorrect error message when users clicked "Expand Volume" to expand a legacy volume.
    - QTS Dashboard should not display warning messages when the storage space of an external drive was almost full.
    - Snapshot Manager could not display the shared folders on the volumes protected by snapshots.
    - Users could not set the NAS as an additional domain controller after updating QTS to 4.3.4.
    - Users could not view the files in NFS shared folders on encrypted NAS volumes via Windows after restarting the NAS.
    - Naming shared folders with certain special characters would cause QTS to display a blank screen in "Control Panel" > "Privilege" > "Shared Folders".
    - Setting a virtual switch as the system default gateway would cause network connection errors.
    - Storage & Snapshots would display a warning message about insufficient storage space when users modified the capacity of an iSCSI LUN even if the storage pool had enough space.
    - The file sort order in a shared folder would be different from the sort order in the shared link of the shared folder.
    - On the myQNAPcloud website, the setup page and the FAQ page for 2-step verification did not list the same supported regions.
    - Users with read-only permissions could not view the thumbnails of media files in File Station.
    - Users could not send an email via PHP using a web browser.
    - Users could not be authenticated using certain passwords when creating a remote snapshot replication job.
    - Google Chrome would display a warning message about untrusted certificates when users tried to access the NAS via HTTPS with a self-signed certificate created in QTS.
    - Enhanced system and data security measures for configuration files.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

    Einmal editiert, zuletzt von juanito_perez ()

  • QTS 4.3.4.0486 build 20180215


    [Important Notes]
    - To learn about the latest changes for x86-based models in this QTS build, see the [Fixed Issues] section below.
    - To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
    - As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
    - Users can now downgrade QTS on ARM-based models. To downgrade to the target version, first downgrade to QTS 4.3.3.0351 Build 20171023 (or later versions).
    - QTS 4.3.4 is the final available firmware update for the following models:
    TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
    - For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
    - When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
    - Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
    - Below are the kernel versions for the NAS models supported by QTS 4.3.4.0479:
    kernel 2.6: TS-269H
    kernel 3.10.20: TS-128, TS-228
    kernel 3.2.26: TS-x31, TS-x31U
    kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
    kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73


    [Fixed Issues]
    QTS could not detect the QXG-10G1T 10 GbE PCIe network adapter.
    Booting process would take a longer time after users updated QTS to 4.3.4.0483 build 20180213.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • [New Features]
    - Added support for using discrete GPU on the TVS-x73e (for Container Station only) and the TVS-x82 (for Container Station or Virtualization Station).


    [Fixed Issues]
    - Updated PHP to the latest version to fix multiple vulnerabilities.
    - Enabling Disk Standby Mode would hinder the NAS from reporting disk information via the SNMP service.
    - Control Panel could not display the list of domain users.
    - The modified dates of files on FAT32 external drives would change after users reconnected the external drives.
    - Users could not access Storage & Snapshots via Safari on macOS after updating QTS to 4.3.4.0435 build 20171230.
    - Unexpected errors would occur to the system partition after users removed another disk after a RAID rebuild.
    - Users could not take snapshots if the usernames of the members in the "administrators" group contained a space.
    - The French strings in Storage & Snapshots contained some spelling errors.
    - Unexpected error messages would appear when users tried to access shared folders in Qsync Central 3.0.3 after updating QTS to 4.3.4.0483 build 20180213.
    - System logs would warn of insufficient space after users enabled Guaranteed Snapshot Space, created thick volumes, and then took snapshots.
    - Enabling advanced folder permissions would prevent non-administrators from accessing external storage devices via SMB after users updated QTS to 4.3.4.0483 build 20180213.
    - Administrators could not perform backup tasks in Virtualization Station 3.1.7.
    - Non-administrators could not access portal folders (for folder aggregation) via Samba after enabling advanced folder permissions.
    - After users dragged folders from File Station to the QTS desktop, the created desktop shortcuts would be named "File Station".

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • [Fixed Issues]
    - Updated ClamAV to the latest version to fix multiple vulnerabilities.
    - Unexpected errors in the RAID configuration files would hinder users from creating new storage pools after existing storage pools failed.
    - Media Library could not set multiple shared folders as media folders if they shared the same path.
    - The confirmation message string for file system check would repeat several times in certain languages.
    - Enabling Service Binding would cause the SNMP service to stop functioning after users updated QTS to 4.3.4.0486 build 20180215.
    - Fixed a vulnerability in Samba that could allow authenticated users to arbitrarily change the passwords of other users (CVE-2018-1057).
    - Fixed a vulnerability in Samba that could allow for denial-of-service attacks on the Print Spooler service (CVE-2018-1050).
    - File Station could not display the files in a subfolder after users moved this folder into another subfolder.
    - An error message would appear when users cut and paste a file from a folder to its subfolder in File Station.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • Zur Info:


    Manche Benutzer haben wohl arge Probleme mit der letzten FW (0537) gehabt, weshalb sie von QNAP offiziell zurückgezogen wurde.


    Wer noch nicht aktualisiert hat, sollte demnach besser bei der vorherigen 0516 bleiben.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • Hatte ich auf 'ner 653pro: Da wurden weit mehr als die Hälfte der Dateien nicht mehr angezeigt (obwohl vorhanden, da nach downgrade wieder angezeigt).

  • :aufsmaul:


    wurde aber auch Zeit diese Version vom Netz zu nehmen.
    Hatte sie ausprobiert. Ein Desaster...

  • im Qnapforum hast du das aber gelesen?


    Zitat

    Es werden zwei gravierende Fehler benannt. Zum einen dauert der Prozess der Entschlüsselung von verschlüsselten Verzeichnisses extrem lange oder wird gar nicht abgeschlossen und zum anderen verschwinden zum wiederholten Male Verzeichnisse und Dateien.


    Also ein Ritt auf der Rasierklinge. Aber wenn du auf scharfe Sachen stehst :360:

  • Ich lese im englischen QNAP-Forum mit :winking_face:


    Die Problemmeldungen habe ich alle gesehen, nur habe ich davon hier bisher nichts bemerken können.
    Ok, ich hab' nichts verschlüsselt.
    Ich vermisse aber auch keine Dateien/Verzeichnisse. Und das hätte ich schnell gemerkt, weil die QNAP mein Archiv ist auf das ich ständig zurückgreife.


    Momentan schwanke ich noch, ob ich einen Downgrade machen soll. Bisher sehe ich aber eigentlich keinen konkreten Grund dazu. Es wäre eher prophylaktisch.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • Hatte sie auch drauf zum Testen.
    Die Lüfter rannten permanent (ein Grund mal die Kiste richtig sauber zu machen :) )
    Der Speed lag nicht im bekannten Bereich, per FTP oft nur so um 20 Mbit, ab und an auch mal etwas mehr dann war aber Schluss.
    Also runter mit dem Ding. Bin jetzt wieder auf die 4.3.4.0516

  • Hm, auch mit Performance habe ich keinerlei Probleme feststellen können.


    Es hat wohl was mit dem Modell zu tun. Meine TS 569 ist ja nicht mehr wirklich aktuell.
    Schade, dass QNAP das Betaprogramm hat fallen lassen.
    Keine Testgeräte mehr und - viel schlimmer - die Gesamtheit der Nutzer als unfreiwillige Betatester.
    Früher sind solche FWs von uns gestoppt worden.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • scheint wohl so zu sein, dass je nach Modell diverse Dinge Ärger bereiten.


    Ab und an bietet das deutsche Forum (Christian) ja Testgeräte an.


    Aber du hast Recht, Qnap fängt an den falschen Ecken an zu sparen.
    Schau'n mer mal

  • Ich hing bisher direkt an Taiwan dran und hab' von dort die Sachen bekommen.


    Irgendwie ist aber alles eingeschlafen und auf meine letzten Mails gab's nicht mal mehr eine Antwort.
    Ich kriege nur noch weiterhin immer zu Weihnachten eine handgeschriebene Grußkarte :)

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • Update bei mir (TS-569L) OK :)



    [Important Notes]
    - This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
    Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
    - To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
    - As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
    - QTS 4.3.4 is the final available firmware update for the following models:
    TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
    - For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
    - When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
    - Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
    - Below are the kernel versions for the NAS models supported by QTS 4.3.4.0479:
    kernel 3.10.20: TS-128, TS-228
    kernel 3.2.26: TS-x31, TS-x31U
    kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
    kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73
    [Fixed Issues]
    - Unlocking encrypted volumes would take a long time after the NAS restarted if users chose not to save the encryption key, and users would not be able to access certain applications.
    - Fixed a cross-site scripting vulnerability to prevent unauthorized access to sensitive information.
    - Updated ClamAV to the latest version to fix multiple vulnerabilities.
    - Unexpected errors in the RAID configuration files would hinder users from creating new storage pools after existing storage pools failed.
    - Media Library could not set multiple shared folders as media folders if they shared the same path.
    - The confirmation message string for file system check would repeat several times in certain languages.
    - Enabling Service Binding would cause the SNMP service to stop functioning after users updated QTS to 4.3.4.0486 build 20180215.
    - Fixed a vulnerability in Samba that could allow authenticated users to arbitrarily change the passwords of other users (CVE-2018-1057).
    - Fixed a vulnerability in Samba that could allow for denial-of-service attacks on the Print Spooler service (CVE-2018-1050).
    - File Station could not display the files in a subfolder after users moved this folder into another subfolder.
    - An error message would appear when users cut and paste a file from a folder to its subfolder in File Station.
    - Users could not restore snapshots when accessing shared folders via Samba after adding the NAS to an Active Directory domain and enabling advanced folder permissions and Windows ACL.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • Kleines Update:


    Die Angaben dazu sind die gleichen, wie die der 551.


    Mit der 551 haben sich bei mir die HDDs nicht mehr schlafen gelegt. Ich hoffe, dass das mit der 557 wieder behoben ist.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

    2 Mal editiert, zuletzt von juanito_perez ()

  • QTS 4.3.4.0569 build 20180501


    [Important Notes]
    - This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
    Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
    - To ensure system stability, QNAP recommends updating and then restarting QVPN Service in App Center after you update QTS to 4.3.4.
    - As QTS previous versions of ARM models do not support snapshots, when you upgrade to QTS 4.3.4, the original volume cannot use this feature immediately. To solve this problem, you have to back up the existing data on your QNAP NAS to external storage. Then you can rebuild the QNAP NAS and take snapshots to the new storage pool with multiple volumes.
    - QTS 4.3.4 is the final available firmware update for the following models:
    TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-1269U-RP, TS-869U-RP, TS-469U-RP, TS-469U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, TS-470, TS-869 Pro, TS-869L, TS-669 Pro, TS-669L, TS-569 Pro, TS-569L, TS-469 Pro, TS-469L, TS-269 Pro, TS-269L, IS-400 Pro.
    - For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
    - When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
    - Starting from QTS 4.3.4, QNAP NAS devices no longer support creating storage pools or static volumes using NVMe PCIe/M.2 SSDs. However, this limitation does not apply to the SSDs installed in built-in M.2 slots or on QM2 expansion cards.
    - Below are the kernel versions for the NAS models supported by QTS 4.3.4.0479:
    kernel 3.10.20: TS-128, TS-228
    kernel 3.2.26: TS-x31, TS-x31U
    kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
    kernel 4.2.8: HS-251, IS-400, SS-x79U, TS-x79, TS-x79U, SS-x79U, TS-x70, TS-x70U, TVS-x70, TS-x31P, TS-x31P2, TS-x31+, TS-x31X, TS-x31XU, TS-x28A, TS- x35, TS-x51, TS-x51A, TS-x51U, TS-x53, TS-x53A, TBS-x53A, TS-x53B, TS-x53BU, TS-x53S, IS-453S, TS-x53U, TVS-x63, TS-x63, TS-x63U, TS-x73U, TS-x77, TVS-x80, TS-x80, TVS-x80U, TS-x80U, TVS-x82, TVS-x82S, TVS-1582TU, TS-x85, TES-x85U, TDS-16489U, TVS-x71, TVS-x71U, TVS-x73


    [Fixed Issues]
    - Fixed a command injection vulnerability in LDAP Server(CVE-2018-0712).

  • Nur zur Info:


    Kaum war die 0588 veröffentlicht, wurde sie schon wieder zurückgezogen :frowning_face:

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)

  • einfach erschrecken was die zur Zeit so abliefern.


    Hatte nach den ersten Desastermeldungen schon die 551 runter geworfen
    und die 516 wieder drauf gemacht.
    Seitdem kommt mir vorerst kein Update mehr drauf.
    Ihr Q-EXT4 dürfen sie gerne behalten :aufsmaul:

  • Ich verstehe wirklich nicht, was sich die GFs dabei gedacht haben, als sie die Betatester abgeschafft haben.
    Zuerst haben sie von heute auf morgen ohne Ankündigung die PN-Funktion auf der Forumseite abgeschaltet, womit wir unsere langjährigen ASP nichr mehr erreichen konnten.
    Als nächstes haben sie die geschützten Beta-Threads im Forum einschlafen lassen und die neuen Versionen sofort allgemein zugänglich gemacht.
    Dazu sollen Fehler nur noch per Ticket gemeldet werden, mit dem Ergebnis, dass sie mit der Ticketbearbeitung gnadenlos überfordert sind.


    Die Konsequenzen davon haben wir jetzt: FW-Qualität im freien Fall und nur noch Geschimpfe im Forum.


    Witzig: Ich bekomme immer noch pünktlich zu Weihnachten jedes Jahr eine handgeschriebene Weihnachtskarte in der sie sich für die wertvolle Testarbeit bedanken.

    Grüße
    ...jp


    DM900 / OE2.5 Experimental ... und sehr glücklich damit :)