[Enigmalight Update-Thread] v0.2rc1 22-01-2015 (IPK and DEB)

  • I have oe20.


    rainbow: blinking, the colors are fine.
    Lightpack 1(from right bottom to left middle): perhaps here are some connections reversed. 4 x blue not in the right order. 1 x right, then 3 x another color and then 3 x blue on the top!?!
    Lightpack 2(from left middle to left bottom): seems good!


    rgb test: Lightpack - one Lightpack lights, not together, but the colors seems fine. In Netterm I cant stop it with strg+c, I must restart the DM8000


    dynamic mode: Red is blue, blue is red or pink, green is green ...







  • Zitat

    Originally posted by apollo0073
    Hi.
    Im on open pli 4 and it does come on dynamic but wont turn to moodlamp or turn off :thinking_face:
    Using latest beta.
    And the boblight android app doesn't work now


    mmm strange..
    when enigmalight is running, is there a enigmalight.info file in /tmp exist ??
    Iam also on openpli4 and all running perfect ..


    Speedy

  • Hello,


    I found another bug in the network mode. When i kill enigmalight with pressing 0 then i press green for lights on, lights getting on but not working correct. I have to exit the plugin and go again into it, only then enigmalight works correctly. Hope you understand me. Greets

    Dreambox 525 OE 2.5, GP 4.1, 2 TB HDD
    Antenne : 110cm Triax
    Motor: Stab HH 120
    LNB: Smart Titanium
    Satelliten: 68,5°E - 45°W


    Raspberry Pi Hyperion

  • Zitat

    Original von holymoly
    OT
    Wer ein günstiges Ambilight mit einzel LED Ansteuerung sucht sollte mal nach
    "LUMINO - Indiegogo campaign" googeln!



    !!!!!!!!!!!!!!!!!!! Vorsicht !!!!!!!!!!!!!!!!!!!


    nachdem ich Gestern spät eine nette Email einer Support-Mitarbeiterin eines Bluethooth Herstellers bekommen habe, die da mit Ambilight mal gar nichts anzufangen wusste, hat's
    mich jetzt aus dem Leichtschlaf gerissen.


    Möglicherweise könnte es sich hier um einen ganz bösen "Fake" handeln!

  • Zitat

    Original von willwaswissen
    ...
    rgb test: Lightpack - one Lightpack lights, not together, but the colors seems fine. In Netterm I cant stop it with strg+c, I must restart the DM8000
    ...


    Correction: two Lightpacks lights, not together, I think so works the rgb test ...

  • I Got LIBUSB_ERROR_NOT_FOUND in OpenPli, OpenATV 4.2 in both DM800SE, and DM8000 with LightPack.


    21:18:41 start of log @ /home/root/.enigmalight/enigmalight.log
    21:18:41 [Config] opening /etc/enigmalight.conf
    21:18:41 [Config] checking config lines
    21:18:41 [Config] config lines valid
    21:18:41 [Config] opening /etc/enigmalight.conf
    21:18:41 [Config] building config
    21:18:41 [Config] built config successfully
    21:18:41 [Device] Start device 1 from 1
    21:18:41 [Device] ambilight: starting
    21:18:41 [Device] ambilight: setting up
    21:18:41 Gamma not set, using 2.2 since this is default for video
    21:18:41 [ELightGUI] Starting socket @ /tmp/enigmalight.sock
    21:18:41 [Main] Starting grabber...
    21:18:41 [Setup] Lights: 10, Cluster leds: 1 as one led
    21:18:41 [Setup] Channels: 30
    21:18:41 [Setup] Interval: 0.10
    21:18:41 [Mode] Dynamic
    21:18:41 [Stb] Detect STB-Type...
    21:18:41 [Stb] Detected STB-Type: BCM7400
    21:18:41 [Video] Open memory /dev/mem
    21:18:41 ambilight: probing Lightpack at bus 1 address 5, serial is 95230303231351316002
    21:18:41 ERROR: ambilight: error detaching interface 0, error:-5 LIBUSB_ERROR_NOT_FOUND
    21:18:41 ERROR: [Device] ambilight: setting up failed, retrying in 10 seconds
    21:18:41 [Video] Set Scanrange to 120x66 (Source 1920x1080)



    /Thomas

  • Ich versuche es im Schlafzimmer mit einem arduino nano
    Pin 13 und pin 11...
    Led leuchten beim start in allen Farben doch dann passiert nichts...


    Weiß jemand ob andere pins genutzt werden müssen?

  • I have the same problem with the colors.


    started enigmalight via console


    Code
    Video color - LED color    
    Red - Blue                      
    Blue - Red
    Green - Green


    It seems to me that Enigmalight is set to BGR instead of RGB.
    No problem for static light (-m 1), but with dynamic light it does not work as expected.


    PS.: I only tested that in network mode.

  • nachdem ich in der config rot auf 00FF00, grün auf FF0000 und blau auf 0000FF geändert habe funktioniert es mit Karatelight 8 Kanal bestens.


    LG bibe1

  • I have changed my color-config of my both Lightpack's, now the colors are fine!
    But sometimes I have freezer, picture and/or color Intervall: 0.01, 0.05 or 0.1 - I try it now with 0.2 ... .

  • Hallo, hab eine Frage.Warum funktioniert enigmalight bei manchen Filmen nicht? Liegt es an 24p ? Oder an den schwarzen Balken ? Gestern lief auf RTL der gestiefelte Kater, da ging es zum Beispiel nicht.



    Grüße Jens

  • Was meinst Du genau mit "funktioniert nicht", komplett dunkel oder ... !?


    Ich hab's gerade auf Sky mit "schwarzen Balken" auspriobiert, ich hab grundsätzlich "Brightness" etwas erhöht, damit das Enigmalight auch bei nicht so hellen Bildunhalten merklich leuchtet.

  • ich hatte keine farbunterstützung, hat quasi nur leicht geleuchtet, aber ohne auf die entsprechenden farben im bild zu reagieren

  • Zitat

    Original von jensmaul
    ich hatte keine farbunterstützung, hat quasi nur leicht geleuchtet, aber ohne auf die entsprechenden farben im bild zu reagieren


    Auch wenn es Dir evtl. nicht hilft, da ich zwei Lightpack's habe. Ich habe bei SAT und 24p mit "schwarzen Balken" Farben. Wie gesagt, habe ich zum einen etwas die "Brightness" auf 3 erhöht und zum anderen, da ich sonst auf meiner DM8000 Bild-freezer habe, den Defaultwert vom Intervall von 0.1 auf 0.25 ... 0.3 ... 0.4 geändert, wobei mir dieses bisher nicht negativ auffällt, da so der Farbwechsel für mich sogar angenehmer ist, etwas "weicher" erfolgt.


    Es ist zwar noch nicht alles perfekt, aber ich bin daher derzeit im Grunde insbesonders nach meiner Farbumstellung, dem Farbtausch von Rot und Blau, in der Config recht zufrieden!
    Wobei ich gerade bei 24p manchmal ganz leichte freezer bei enigmalight hatte(Bild war hierbei stabil)!?