[Enigmalight Update-Thread] v0.2rc1 22-01-2015 (IPK and DEB)

  • Hi Folks,


    Enigmalight Beta Thread


    For issues/bugs
    post it on my github page (source is not right there,will add it later) https://github.com/Speedy1985/enigmalight/issues



    I you want to help me with translating, send me a pm.


    Questions and Anwsers:


    Q: I get only white color when i run EnigmaLight ?
    A: Try another version in settings, i gues a version with FPU.


    Q: Can i use the boblight.conf ?
    A: Yes you can use this, rename that file to enigmalight.conf.


    Q: Can i use the multiquickbutton plugin ?
    A: Yes for start and stop the lights.


    Q: Enigmalight is freezed, what can i do ?
    A: In MainMenu press 0 to forcekill enigmalight.


    Q: How to get support ?
    A: Contact me over email info at enigmalight dot net or send me a pm.


    SeduLight Prefix and Postfix:
    Some users has problems with SeduLight, Use this prefix and postfix to get it work.
    You need to know how much channels you have, Leds count * 3 = channels.


    96 or lower channels: Prefix 5A A0 Postfix A5
    256 or lower channels: Prefix 5A A1 Postfix A5
    512 or lower channels: Prefix 5A A2 Postfix A5
    768 or lower channels: Prefix 5A B0 Postfix A5


    Preview:

    Code
    [device]
    name ambilight
    output /dev/ttyUSB0
    channels 414
    type momo
    interval 20000
    prefix 5A A2
    postfix A5
    rate 500000


    Translations:
    German -> HolyMoly
    Dutch -> Speedy1985



    ChangeLog 0.2rc1:
    - [Fixed] A lot of little fixes and cleaning code.
    - [Added] Webremote for mobile of tablet (Beta) its not working all, it's a first test http://boxip:1414
    - [Added] Skin now working if you use a 1920x1080 skin.
    - [Added] Blackbar detection delay
    - [Added] Deb version !!
    - [??????] And more, but forget this all LOL :)


    - ENJOY!! ;)


    I will add my code to Github this week, so if there is are some members who want to help ?? your welcome !!


    ChangeLog Beta 12:
    - [Fixed] Timer wasn’t working
    - [Fixed] Cpu usage high when EnigmaLight was idle
    - [Added] Blackbar detection vertical and horizontal
    - [Added] New background samples for the blackbardetection in tuningscreen, use this to test if the detection works.
    - [Changed] Changed adjustscreen with sample backgrounds to tuning screen.
    - [Added] Added a function to select the right bintype of enigmalight to load. Enigmalight can’t detect the FPU support on some receivers. If you get only white color then you have the wrong bintype and need another one with FPU.
    - [Cleaned] Cleaned code


    NOW READ THIS CAREFULLY BEFORE USE THIS NEW BETA!!


    For new future releases and the new blackbar detection you need to add one extra key to your configfile enigmalight.conf
    Each light needs a position, enigmalight need to know this to change the depth on top and bottom for the blackbardetection and later for subtitles remove and edge corrections (later releases).


    # positions are top, bottom, left and right
    # Each [light] needs his position !
    # This new beta can’t use a enigmalight.conf without the positions!
    # Light names can only be 3 chars like 001 or XX1 or others


    Old config:

    Code
    [light]
    name 90X
    color red ambilight 268
    color green ambilight 269
    color blue ambilight 270
    hscan 0 10
    vscan 82.35 88.24


    New config:

    Code
    [light]
    position bottom
    name 90X
    color red ambilight 268
    color green ambilight 269
    color blue ambilight 270
    hscan 0 10
    vscan 82.35 88.24


    [/SIZE]ChangeLog Beta 10:
    - [Fixed] Fixed update function
    - [Fixed] I hope lihtpack is working now, cant test this because i have no lightpack devices.
    - [Fixed] Network mode fixed, XBMC now connecting without problems
    - [Fixed] Mode change method, when changed from mode grabber was starting one sec before switch to another mode. now change directly to mode


    Sorry for blackbardetection ! not in this beta because i dont't have enough time for it this week. Next beta it wil be there !


    ChangeLog Beta 9.8:
    - Added/Fixed RGB Sequence
    - Fixed Dreambox 7080HD
    - A lot off cleanup
    - Box detection works better now in About screen.
    - Fixed a memoryleak


    in next beta you will see the new blackbardetection, almost ready.. :)

    ChangeLog Beta 9.5
    - [Fixed] log-function, printing double functions
    - [Fixed] lightpack, now connect 2 or more lightpacks
    - [Fixed] (Ihad Terror01) EL_Check.py, line 78, Crash fixed
    - [Added] Smoothing (Tuning screen)


    ChangeLog Beta 9.4:
    - Network mode fixed
    - Disabled adjust mode for networkmode, because hyperion and default boblight don't have the liveadjust.
    - Added new binary files for receivers without FPU support like the DM800 (but without FPU it will be slow)
    - Changed log function
    - Statusbar bug fixed


    ChangeLog Beta 9.3:
    - Enigmalight can be used as grabber or moodlamp or server for boblight/hyperion clients
    - Its only onefile, so now it use 8-9% cpu @ 1920x1080 with interval @ 0.10 (10fps) and can run on a dualcore with interval 0.01 @ 90fps with 40% cpu, but 90fps is overkill :)
    - Grabber again optimized
    - Added statusbar with info (RUNNING or NOT,CPU,FPS,MODE) in GUI and it will be refreshed every sec.
    - New effects (rainbow, rgb test, later more...)
    - Lightpack support fixed, now you can connect 2 lightpacks or more, see my website http://enigmalight.net for the howto.
    - New GUI
    - Log function, GUI will make log file in /tmp if you enable this option in settings
    - Translations not done yet, first it must be stable
    - Added a lot of new code
    - Added BRCM7241 (et8000) and BRCM7346 (GigaBlue EU )chipsets
    - Select configfile from settings
    - Switch from local to networkmode
    - And more


    Install notes:
    - First remove Boblight
    - Install new EnigmaLight (ipk/deb can be installed on mipsel and mips32el)
    - Restart your receiver and enjoy your new ambilight :)


    Log Files:
    - Turn on debuglogs (GUI logs) in settings for log files in /tmp/enigmalight_gui.log, we can share it here for help
    - EnigmaLight program logs are found in /home/root/.enigmalight/enigmalight.log



    Nice video from beta tester, https://www.youtube.com/watch?v=YqY61DEr9GY


    For issues/bugs
    post it on my github page (source is not right there,will add it later) https://github.com/Speedy1985/enigmalight/issues


    I hope you enjoy it !! :P
    Greetz Speedy !



    If you enjoy EnigmaLight, and would like to support continued development, you can make a donation here
    Thanks!!
    :rolleyes:

  • Gigablue Quad Plus


    Code
    root@gbquadplus:/usr/local# cat /proc/stb/info/chipset
    bcm7356
    root@gbquadplus:/usr/local# cat /proc/stb/info/model
    Gigablue
  • Quote

    Originally posted by croat
    Gigablue Quad Plus


    Code
    root@gbquadplus:/usr/local# cat /proc/stb/info/chipset
    bcm7356
    root@gbquadplus:/usr/local# cat /proc/stb/info/model
    Gigablue


    Supported! :P
    Thanks for help.


    Gr Speedy

    if you like this project and want to support me, buy me a beer ;) Thanks!!

  • If you need a beta tester with a Dreambox 8000 and two Lightpacks with Firmware 6.3, so if you want, send me a pm!
    cat /proc/cpuinfo: BCM7400D2

  • I can test it on the following receivers


    Atemio Nemesis
    Gigablue Quad
    Xpeed LX1
    Optimuss OS1 Plus

  • Telestar Starsat LX
    root@starsatlx:~# cat /proc/stb/info/chipset
    bcm7358
    root@starsatlx:~# cat /proc/stb/info/model
    dm800se
    root@starsatlx:~# cat /proc/cpuinfo
    system type : BCM7358A1 STB platform
    processor : 0
    cpu model : Broadcom BMIPS3300 V3.2
    BogoMIPS : 749.56
    cpu MHz : 751.515
    wait instruction : yes
    microsecond timers : yes
    tlb_entries : 32
    extra interrupt vector : yes
    hardware watchpoint : no
    ASEs implemented : mips16
    shadow register sets : 1
    kscratch registers : 0
    core : 0
    VCED exceptions : not available
    VCEI exceptions : not available



    dm800se? haha funny :) :rolleyes:
    Software Info


  • I am looking forward to your release ;)
    Over 1 Year I use boblight and enjoy my 50 Lights.


    3rd video is mine you link in the "Videos" Section of your webpage :hurra:


    GreeT`s ERich

  • Im useing Openatv 4.2 ATM.


    I dont like blackhole image but i can test it but not before weekend

  • Quote

    Originally posted by apollo0073
    ok i have tested on open atv 4.2 and it starts but lights are dim :/


    what type of leds you use ?
    I think the cdc'_acm or fdti_sio driver is not compatible with your last image


    This driver will do the transmission for the color to the hardware.


    But on 3.2 it's ok ?
    Only 4.2 is not ?


    Gr Speedy

    if you like this project and want to support me, buy me a beer ;) Thanks!!

  • led`s are ws2801`s 50pcs
    openspa 3.2 works great.
    openatv 4.2 starts but dim lights.
    blackhole 2.1.1 crashes
    vti crashes.


    will be testing more .... :)