IPTV Dienste in Bouquets einfügen (mit Hilfe im 1. Beitrag)

  • aslan2006
    Danke für Deine Meldung.
    Ich habe eine Kamera schon aufgemacht. Allerdings ist das Protokoll RTSP.
    Aber bei diese Kamera kann ich keine Aufnahmen über die Kanalliste machen.
    Da kommt die Meldung "Aufnahme wegen ungültigem Kanal fehlgeschlagen.
    Ist es nicht möglich oder mache etwas falsch?
    Grüße
    nanna

  • ..also Aufnahmen zu machen endet bei mir mit der selben Fehlermeldung und ist wohl generell auch nicht möglich bzw. nicht vorgesehen.
    Da verlangt man dann doch sicher etwas zuviel....

    2x DM 900 UHD
    1x DM 800 HDse V2
    4x DM 500 HD V2
    Merlin OE2.x/GP3.x/Eigener Skin
    Sky Welt/Film HD, HD+, V13

    :429:


  • a) Mit "axis" kenne ich mich nicht aus. Ich habe auch noch einige "axis" Streams in der Schublade, die ich leider nicht zum laufen gebracht habe. Derzeit ist aber "axis" nicht oben in meiner TO-DO - Liste.


    b) Wie Aslan206 schon schrieben hat, ist IPTV für streams und nicht für Bilder.


    c) Nach "http%3a" sollte eine Internetadresse stehen. Diese kann ich in Deinen Beispielen nicht erkennen.


    d) Vielleicht ist "no.ip" das Kürzel für eine Internetadresse.
    Mehr als wild rumspekulieren kann ich aber leider bei diesen Beispielen nicht.


    Tut mir leid Dir nicht weiter helfen zu können.

    DMM Unstable OE 2.5 - Dreambox OS/GP4/Zombi-Shadow-FHD -- alles immer aktuell -- -- -- Sat in BW: 13.0°E - 19.2°E - 23.5°E - 28.2°E + Kabel UM(BW) + DVB-T2 in NRW

  • Quote

    Original von aslan2006
    ..also Aufnahmen zu machen endet bei mir mit der selben Fehlermeldung und ist wohl generell auch nicht möglich bzw. nicht vorgesehen.
    Da verlangt man dann doch sicher etwas zuviel....


    Viel kann es aber nicht sein, denn PARTNERBOX Programme, die man in die Senderliste gelegt hat, sind im Grunde ja auch nur IP-basierte Sender, und die kann man problemlos aufnehmen.

  • Bei mir habe ich die IPTV-Adressen von Entertain eingebunden. Natürlich habe ich auch einen entsprechenden Tarif bei der Telekom.


    Durch den Trick, die EPG-Informationen, von den DVB-C Kanälen zu "stehlen", sind sogar Timer gesteuerte Aufnahmen (allerdings ohne VPS) möglich.


    Gruss - LERNI -

    ---------------------------------------------
    manchmal verliert man
    und manchmal gewinnen die Anderen
    ---------------------------------------------

  • Hallo,hab mal in Bouquet iptv Adresse eingefügt z.B. rtsp://fms.zulu.mk/zulu/alfa_1 geht.Aber z.B. Center TV geht nicht hat jemand ne Idee



    Das ist Adresse geht mit PC und Mein TV v2.8



    rtmp://x3282azmedc12001.f.l.f.lb.core-cdn.net/12001centertvkoeln/live/3282azmedia/live_de_500


    wäre toll,wenn es einer hinbekommt.


    Jupp

  • Hab es jetzt so probierthab aber etzt nur Ton



    #SERVICE 4097:0:1:0:0:0:0:0:0:0:rtmp%3a//x3282azmedc12001.f.l.f.lb.core-cdn.net/12001centertvkoeln playpath=live/3282azmedia/live_de_500 swfUrl=http://koeln.center.tv/static/flash/ctv_xplayer.swf pageUrl=http://koeln.center.tv/cms/ swfVfy=true live=true

  • hab auch mal ne frage und zwar habe ich einen stream laufen mit turkvod da sieht es so aus
    rtmp://stream.smcloud.net/live2/eska_party/eska_party_360p&W=http://www.eskago.pl/html/javascript/player/flowplayer.rtmp.swf&p=http://www.eskago.pl/tv/eska-party-tv
    stream läuft




    in meine bouquet liste hab ich den auch eingefügt aber da kommt nichts und wenn ich umschalte hängt sich die box auf was stimmt nicht mit der adresse ?
    rtmp%3a//stream.smcloud.net/live2/eska_party playpath=eska_party_360p swfUrl=http%3a//www.eskago.pl/html/javascript/player/flowplayer.rtmp.swf pageUrl=http%3a//www.eskago.pl/tv/eska-party-tv


    nix geht mehr


  • rtmp://46.105.112.212:1935/live<playpath>mpegts.stream <swfUrl>http://www.eskago.pl/html/java…layer/flowplayer.rtmp.swf <pageUrl>http://www.eskago.pl/tv/eska-tv
    aber nur Bild :(
    auf mein satxtrem s18 bild und ton ok :tongue:

  • ja das ist das normale eska tv was auch auf hotbird kommt aber mein stream bringt eska party tv den musik sender gibt es auch noch aber halt nur der stream warum bei dir nur bild kommt ??? keine ahnung

    Edited once, last by tnt ().

  • Muß man da noch irgendwas installieren? Sobald ich eine Adresse in die Senderliste pack gibts einen Dauerloop. Wenn ich den Sender wieder entferne geht auch nichts mehr. Neu flashen.




    [ 46.676000] 8 ms: 100
    Traceback (most recent call last):
    File "/usr/lib/enigma2/python/mytest.py", line 55, in <module>
    import Screens.InfoBar
    File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 4, in <module>
    from Screens.MovieSelection import MovieSelection
    File "/usr/lib/enigma2/python/Screens/MovieSelection.py", line 9, in <module>
    from Components.PluginComponent import plugins
    File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 8, in <module>
    from Plugins.Plugin import PluginDescriptor
    File "/usr/lib/enigma2/python/Plugins/Plugin.py", line 1, in <module>
    from Components.config import ConfigSubsection, config
    ImportError: No module named config
    ---- saving lame channel db
    saved 128 channels and 2000 services!
    release cached channel (timer timeout)
    - (41) eHbbtv
    - (41) eServiceFactoryBludisc
    - (41) eServiceFactoryM2TS
    - (41) eServiceFactoryMP3
    - (41) eServiceFactoryFS
    - (41) eServiceFactoryDVB
    - (40) eServiceCenter
    clear instance
    - (35) CI Slots
    - (30) eActionMap
    - (21) input device driver
    - (21) Console RC Driver
    - (20) DVB-CI UI
    - (20) UHF Modulator
    - (20) RC Input layer
    - (20) misc options
    - (20) HDMI CEC Subsystem
    - (20) AVSwitch Driver
    - (15) eWindowStyleManager
    - (10) gRC
    waiting for gRC thread shutdown
    gRC thread has finished
    - (9) GFBDC
    [ 47.128000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [ 47.133000] bcmfb: disable manual blit
    - (9) gLCDDC
    - (9) Font Render Class
    - (8) graphics acceleration manager
    - (1) Background File Eraser
    eBackgroundFileEraser got quit message
    thread joined 0
    reached rl -1
    [prepareClose] no mainloop
    [SEC] lock 0
    [SEC] delayed close frontend
    close frontend 1
    [SEC] unlock
    [ 47.447000] VIDEO0: set blank to 0
    [ 47.448000] sync is off so we enable it
    [ 47.448000] playback!
    [ 47.449000] total video delay: 0 (0 ms)
    [ 47.453000] VIDEO0: start decode
    [ 47.454000] flush video decoder
    [ 47.489000] VIDEO0: first pts 0x0
    [ 47.611000] VIDEO0: set blank to 0
    [ 47.613000] VIDEO0: stop decode
    [ 47.613000] VIDEO0: set blank to 0
    [ 47.614000] no decoder left in sync handling so disable xpt_sync
    Enigma2 v4.0.0 (revision: tarball-20130314-0-g8094390, date: 2013-03-14)


    Enigma2 is property of Dream Multimedia GmbH. All copyrights with regard to
    Enigma2 belong to Dream Multimedia GmbH only.


    The full license text is available at /usr/share/doc/enigma2/LICENSE.


    PYTHONPATH: /usr/lib/enigma2/python
    enigma2 is the main pvr application... adjust oom score!
    + (1) Background File Eraser
    before: 1
    after: 1
    + (8) graphics acceleration manager
    setIoPrio best-effort level 7 ok
    + (9) GFBDC
    16384k video mem
    [ 50.230000] bcmfb: enable manual blit
    [ 50.254000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    - double buffering not available.
    14764kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 2880)
    + (9) gLCDDC
    found OLED display!
    [ 50.325000] procfile_read_xres called
    [ 50.325000] procfile_read_xres called
    [ 50.326000] procfile_read_yres called
    [ 50.327000] procfile_read_yres called
    [ 50.328000] procfile_read_bpp called
    [ 50.329000] procfile_read_bpp called
    lcd buffer 0x73825008 192000 bytes, stride 800
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) HDMI CEC Subsystem
    attached: hdmi attached
    attached: hdmi cec address acknowledged
    my physical: 2.0.0.0 logical 3
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "dreambox front panel" is a remotecontrol
    Input device "dreambox remote control (native)" is a remotecontrol
    Input device "dreambox advanced remote control (native)" is a remotecontrol
    [ 50.340000] tsmux set cisource reg 06 to val 00


    Input device "dreambox ir keyboard" is a keyboard
    Input device "dreambox ir mo[ 50.342000] tsmux set cisource reg 07 to val 00
    use" is a mouse
    Found 5 input devices!
    + (21) Console RC Driver
    + (30) eActio[ 50.343000] tsmux set tsports reg 00 to val 00
    nMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0 has fd 27
    CI[ 50.344000] tsmux set tsports reg 01 to val 01
    Slot 1 has fd 28
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    eDVBCIInterfaces->setInputSource(2, 2)
    eDVBCIInterfaces->setInputSource(3, 3)
    done, found 2 common interface slots
    + (40) eServiceCenter
    settings instance.
    + (41) eHbbtv
    + (41) eServiceFactoryBludisc
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 2000 services
    scanning for frontends..
    opening frontend 0
    [ 50.808000] bcm4506: channel 0 is in normale mode now
    detected satellite frontend
    (0)setTone Off
    (0)setVoltage 0V
    close frontend 0
    opening frontend 1
    [ 50.822000] bcm4506: channel 0 is sleeping now
    detected cable frontend
    close frontend 1
    scanning for demux..
    scanning for decoders..
    scanning for descramblers..
    found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 5
    [eDVBLocalTimeHandler] RTC not ready... wait for transponder time
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    try to load spinners from path /media/usb/Sylvester und Tweety/
    found 6 spinners!
    executing main
    setIoPrio best-effort level 6 ok
    [ 51.505000] 4829 ms: 100
    [ 51.521000] 16 ms: 50
    /proc/stb/frontend/0/lnb_sense is 0
    [setupConfigEntries] initial_call for stored uuid: c51cebeb-bffb-4a87-9823-807c466441ca {'mountpoint': '/media/hdd', 'device_info': 'SATA', 'device_description': 'ATA-WDC WD30EZRX-00M (3000.592 GB)', 'enabled': 'true'}
    enumerating block devices...
    found block device 'loop0': blacklisted
    found block device 'loop1': blacklisted
    found block device 'mtdblock0': blacklisted
    found block device 'mtdblock1': blacklisted
    found block device 'mtdblock2': blacklisted
    found block device 'mtdblock3': blacklisted
    found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1']
    Unable to determine structure of /dev fallback to udev
    new Harddisk sda -> /dev/sda -> /dev/sda
    [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
    [addDevicePartition] device:'sda' with UUID:'None'
    found block device 'sda1': error querying properties
    [addDevicePartition] device:'sda1' with UUID:'c51cebeb-bffb-4a87-9823-807c466441ca'
    [enumerateBlockDevices] devices_scanned_on_init: [('sda', False, False, True)]
    Reading satellites.xml
    main thread is non-idle! display spinner!
    Reading cables.xml
    couldn't open /etc/tuxbox/cables.xml!!
    Reading terrestrial.xml
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled No, DVB-S2 Yes
    setSlotInfo for dvb frontend 1 to slotid 1, descr CXD1981, need rotorworkaround No, enabled No, DVB-S2 No
    opening frontend 1
    eDVBFrontend::slot1 type is already 1 .. ignore
    (1) preClose
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes
    setSlotInfo for dvb frontend 1 to slotid 1, descr CXD1981, need rotorworkaround No, enabled Yes, DVB-S2 No
    slot: 0 configmode: simple
    diseqcmode: single
    sec config completed
    [ 53.088000] 1566 ms: 51
    [ 53.096000] 8 ms: 84
    [ 53.117000] 21 ms: 84
    [ 53.134000] 17 ms: 85
    [ 53.136000] 1 ms: 86
    [ 53.155000] 19 ms: 86
    not loading user skin: [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
    [ 53.716000] 561 ms: 87
    [ 53.843000] 127 ms: 97
    [ 53.855000] 12 ms: 99
    [ 53.857000] 1 ms: 99
    [ 53.859000] 2 ms: 99
    Traceback (most recent call last):
    File "/usr/lib/enigma2/python/mytest.py", line 55, in <module>
    import Screens.InfoBar
    File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 4, in <module>
    from Screens.MovieSelection import MovieSelection
    File "/usr/lib/enigma2/python/Screens/MovieSelection.py", line 9, in <module>
    from Components.PluginComponent import plugins
    File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 8, in <module>
    from Plugins.Plugin import PluginDescriptor
    File "/usr/lib/enigma2/python/Plugins/Plugin.py", line 1, in <module>
    from Components.config import ConfigSubsection, config
    ImportError: No module named config
    ---- saving lame channel db
    saved 128 channels and 2000 services!
    release cached channel (timer timeout)
    - (41) eHbbtv
    - (41) eServiceFactoryBludisc
    - (41) eServiceFactoryM2TS
    - (41) eServiceFactoryMP3
    - (41) eServiceFactoryFS
    - (41) eServiceFactoryDVB
    - (40) eServiceCenter
    clear instance
    - (35) CI Slots
    - (30) eActionMap
    - (21) input device driver
    [ 54.170000] usb 1-2: usbfs: process 650 (usbtftdisplay) did not claim interface 0 before use
    - (21) Console RC Driver
    - (20) DVB-CI UI
    - (20) UHF Modulator
    - (20) RC Input layer
    - (20) misc options
    - (20) HDMI CEC Subsystem
    - (20) AVSwitch Driver
    - (15) eWindowStyleManager
    - (10) gRC
    waiting for gRC thread shutdown
    gRC thread has finished
    - (9) GFBDC
    [ 54.213000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [ 54.219000] bcmfb: disable manual blit
    - (9) gLCDDC
    - (9) Font Render Class
    - (8) graphics acceleration manager
    - (1) Background File Eraser
    eBackgroundFileEraser got quit message
    thread joined 0
    reached rl -1
    [prepareClose] no mainloop
    [SEC] lock 0
    [SEC] delayed close frontend
    close frontend 1
    [SEC] unlock
    [ 54.454000] VIDEO0: set blank to 0
    [ 54.455000] sync is off so we enable it
    [ 54.456000] playback!
    [ 54.456000] total video delay: 0 (0 ms)
    [ 54.460000] VIDEO0: start decode
    [ 54.461000] flush video decoder
    [ 54.509000] VIDEO0: first pts 0x0
    [ 54.625000] VIDEO0: set blank to 0
    [ 54.626000] VIDEO0: stop decode
    [ 54.626000] VIDEO0: set blank to 0
    [ 54.627000] no decoder left in sync handling so disable xpt_sync
    Enigma2 v4.0.0 (revision: tarball-20130314-0-g8094390, date: 2013-03-14)


    Enigma2 is property of Dream Multimedia GmbH. All copyrights with regard to
    Enigma2 belong to Dream Multimedia GmbH only.


    The full license text is available at /usr/share/doc/enigma2/LICENSE.


    enigma2 is the main pvr application... adjust oom score!
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    before: 1
    after: 1
    + (8) graphics acceleration manager
    setIoPrio best-effort level 7 ok
    + (9) GFBDC
    16384k video mem
    [ 57.793000] bcmfb: enable manual blit
    [ 57.830000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    - double buffering not available.
    14764kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 2880)
    + (9) gLCDDC
    found OLED display!
    [ 57.901000] procfile_read_xres called
    [ 57.901000] procfile_read_xres called
    [ 57.902000] procfile_read_yres called
    [ 57.903000] procfile_read_yres called
    [ 57.904000] procfile_read_bpp called
    [ 57.905000] procfile_read_bpp called
    lcd buffer 0x74335008 192000 bytes, stride 800
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) HDMI CEC Subsystem
    attached: hdmi attached
    attached: hdmi cec address acknowledged
    my physical: 2.0.0.0 logical 3
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "dreambox front panel" is a remotecontrol
    Input device "dreambox remote control (native)" is a remotecontrol
    Input device "dreambox advanced remote control (native)" is a remotecontrol
    Input device "d[ 57.916000] tsmux set cisource reg 06 to val 00
    reambox ir keyboard" is a keyboard
    Input device "dreambox ir mouse" is a mouse
    [ 57.918000] tsmux set cisource reg 07 to val 00


    Found 5 input devices!
    + (21) Console RC Driver
    + (30) eActionMap
    + (35) CI [ 57.919000] tsmux set tsports reg 00 to val 00
    Slots
    scanning for common interfaces..
    CI Slot 0 has fd 27
    CI Slot 1 has fd 2[ 57.921000] tsmux set tsports reg 01 to val 01
    8
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    eDVBCIInterfaces->setInputSource(2, 2)
    eDVBCIInterfaces->setInputSource(3, 3)
    done, found 2 common interface slots
    + (40) eServiceCenter
    settings instance.
    + (41) eHbbtv
    + (41) eServiceFactoryBludisc
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 2000 services
    scanning for frontends..
    opening frontend 0
    [ 58.381000] bcm4506: channel 0 is in normale mode now
    detected satellite frontend
    (0)setTone Off
    (0)setVoltage 0V
    close frontend 0
    opening frontend 1
    [ 58.395000] bcm4506: channel 0 is sleeping now
    detected cable frontend
    close frontend 1
    scanning for demux..
    scanning for decoders..
    scanning for descramblers..
    found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 5
    [eDVBLocalTimeHandler] RTC not ready... wait for transponder time
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    try to load spinners from path /media/usb/Sylvester und Tweety/
    found 6 spinners!
    executing main
    setIoPrio best-effort level 6 ok
    [ 59.083000] 5224 ms: 100
    [ 59.100000] 17 ms: 50
    /proc/stb/frontend/0/lnb_sense is 0
    [setupConfigEntries] initial_call for stored uuid: c51cebeb-bffb-4a87-9823-807c466441ca {'mountpoint': '/media/hdd', 'device_info': 'SATA', 'device_description': 'ATA-WDC WD30EZRX-00M (3000.592 GB)', 'enabled': 'true'}
    enumerating block devices...
    found block device 'loop0': blacklisted
    found block device 'loop1': blacklisted
    found block device 'mtdblock0': blacklisted
    found block device 'mtdblock1': blacklisted
    found block device 'mtdblock2': blacklisted
    found block device 'mtdblock3': blacklisted
    found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1']
    Unable to determine structure of /dev fallback to udev
    new Harddisk sda -> /dev/sda -> /dev/sda
    [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
    [addDevicePartition] device:'sda' with UUID:'None'
    found block device 'sda1': error querying properties
    [addDevicePartition] device:'sda1' with UUID:'c51cebeb-bffb-4a87-9823-807c466441ca'
    [enumerateBlockDevices] devices_scanned_on_init: [('sda', False, False, True)]
    Reading satellites.xml
    main thread is non-idle! display spinner!
    Reading cables.xml
    couldn't open /etc/tuxbox/cables.xml!!
    Reading terrestrial.xml
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled No, DVB-S2 Yes
    setSlotInfo for dvb frontend 1 to slotid 1, descr CXD1981, need rotorworkaround No, enabled No, DVB-S2 No
    opening frontend 1
    eDVBFrontend::slot1 type is already 1 .. ignore
    (1) preClose
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM4505, need rotorworkaround No, enabled Yes, DVB-S2 Yes
    setSlotInfo for dvb frontend 1 to slotid 1, descr CXD1981, need rotorworkaround No, enabled Yes, DVB-S2 No
    slot: 0 configmode: simple
    diseqcmode: single
    sec config completed
    [ 60.890000] 1789 ms: 50
    [ 60.898000] 7 ms: 83
    [ 60.925000] 27 ms: 83
    [ 60.941000] 15 ms: 84
    [ 60.943000] 2 ms: 84
    [ 60.963000] 20 ms: 84
    not loading user skin: [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
    [ 61.534000] 571 ms: 84
    [ 61.657000] 123 ms: 97
    [ 61.670000] 12 ms: 99
    [ 61.672000] 1 ms: 99
    [ 61.679000] 7 ms: 100
    Traceback (most recent call last):
    File "/usr/lib/enigma2/python/mytest.py", line 55, in <module>
    import Screens.InfoBar
    File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 4, in <module>
    from Screens.MovieSelection import MovieSelection
    File "/usr/lib/enigma2/python/Screens/MovieSelection.py", line 9, in <module>
    from Components.PluginComponent import plugins
    File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 8, in <module>
    from Plugins.Plugin import PluginDescriptor
    File "/usr/lib/enigma2/python/Plugins/Plugin.py", line 1, in <module>
    from Components.config import ConfigSubsection, config
    ImportError: No module named config
    ---- saving lame channel db
    saved 128 channels and 2000 services!
    release cached channel (timer timeout)
    - (41) eHbbtv
    - (41) eServiceFactoryBludisc
    - (41) eServiceFactoryM2TS
    - (41) eServiceFactoryMP3
    - (41) eServiceFactoryFS
    - (41) eServiceFactoryDVB
    - (40) eServiceCenter
    clear instance
    - (35) CI Slots
    - (30) eActionMap
    - (21) input device driver
    - (21) Console RC Driver
    - (20) DVB-CI UI
    - (20) UHF Modulator
    - (20) RC Input layer
    - (20) misc options
    - (20) HDMI CEC Subsystem
    - (20) AVSwitch Driver
    - (15) eWindowStyleManager
    - (10) gRC
    waiting for gRC thread shutdown
    gRC thread has finished
    - (9) GFBDC
    [ 62.060000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [ 62.065000] bcmfb: disable manual blit
    - (9) gLCDDC
    - (9) Font Render Class
    - (8) graphics acceleration manager
    - (1) Background File Eraser
    eBackgroundFileEraser got quit message
    thread joined 0
    reached rl -1
    [prepareClose] no mainloop
    [SEC] lock 0
    [SEC] delayed close frontend
    close frontend 1
    [SEC] unlock
    [ 62.307000] VIDEO0: set blank to 0
    [ 62.308000] sync is off so we enable it
    [ 62.308000] playback!
    [ 62.309000] total video delay: 0 (0 ms)
    [ 62.313000] VIDEO0: start decode
    [ 62.315000] flush video decoder
    [ 62.349000] VIDEO0: first pts 0x0
    [ 62.474000] VIDEO0: set blank to 0
    [ 62.475000] VIDEO0: stop decode
    [ 62.475000] VIDEO0: set blank to 0
    [ 62.476000] no decoder left in sync handling so disable xpt_sync

    Edited 2 times, last by platzhirsch ().


  • Vielleicht hat es damit zu tun. Was ist den dieses "mytest.py"?


    mfg Andreas

  • k.A.
    Habe auch nichts geändert. Einen Sender (beide Zeilen) hinzugefügt - Box neugestartet - Dauerloop
    Naja. Ich laß die IPTV Sache. Hab neu geflasht.

  • Hi,


    schau mal ob es auf der Box einen Ordner /usr/lib/enigma2/python/Plugins/Components (NICHT /usr/lib/enigma2/python/Components) gibt... wenn ja.. der sollte leer sein bzw. nur eine readme.txt drinn sein.. dieser muss gelöscht werden. Dann sollte dass ganze wieder funktionieren.


    Aber eigentlich sollte auch ein update das Problem lösen. Also auf dem aktuellen Feed sollte eigentlich ein gefixtes Plugin liegen.


    cu

  • @nolia2:
    Ja. Ist drin. (aktuelles Merlin OE2.0 ohne GP)



    REDME:


    Description: Eventlist Converter and Renderer to display n events and primetime


    Usage example:


    <widget position="10,60" backgroundColor="transparent" transparent="1" alphatest="blend" render="EventListDisplay" size="800,100" source="ServiceEvent" rowHeight="26" column0="0,100,#ffffff,Regular,16,0,0" column1="110,600,#0056c856,Regular,22,0,1" column2="720,80,#0064c7,Regular,14,1,2" primetimeoffset="10">
    <convert type="EventList">primetime=yes,eventcount=2</convert>
    </widget>



    Description:


    Structure of Column0 bis Column2: (you do not have to set all columns)
    Example: column0="0,100,#ffffff,Regular,16,0,0"


    --> 1. parameter : x position (relational to widget-position)
    --> 2. parameter : Length
    --> 3. parameter : Color
    --> 4. parameter : Font-Nane
    --> 5. parameter : Font-Size
    --> 6. parameter : Text-Alignment (0 = left, 1 = right, 2 = centred)
    --> 7. parameter : data infos ( 0 = time, 1 = EPG-Description, 2 = Duration)


    rowHeight --> Height of row
    primetimeoffset --> Primetime offset (y position down)


    <convert type="EventList">primetime=yes,eventcount=2</convert>
    --> primetime=yes -->display primetime (optional, default = no)
    --> eventcount=quantity --> quantity of events (optional, default = 0, quantity=any number)



    If you want to use this converter/renderer set a depends in the control file of your skin



    If you have any questions visit http://www.dreambox-tools.info
    Dr.Best

    Edited 2 times, last by platzhirsch ().

  • ich wollte mal andere private sender in meine IPTV liste einfügen die über Entertain kommen, habe da ein paar adressen, allerdings klappt das irgendwie nicht, hatt evtl. wer eine liste von anderen sender als den ÖR?


    Testliste:


    35 DSF Comfort 239.35.80.11:10000
    36 Eurosport Comfort 239.35.69.11:10000
    41 COMEDY CENTRAL Comfort ?? 239.35.211.11:10000
    42 GIGA TV Comfort 239.35.205.11:10000
    50 Bibel TV Comfort 239.35.137.11:10000
    51 Bloomberg Comfort 239.35.130.11:10000
    53 Deutsche Welle Comfort 239.35.131.11:10000
    54 DMAX Comfort 239.35.76.12:10000
    57 EuroNews D Comfort 239.35.196.11:10000
    58 K TV Comfort 239.35.72.11:10000
    59 N24 Comfort 239.35.138.11:10000
    60 n-tv Comfort 239.35.79.11:10000
    70 Deluxe Music Comfort 239.35.67.11:10000
    71 MTV Comfort 239.35.77.12:10000
    72 VIVA Comfort 239.35.147.11:10000
    81 9Live Comfort 239.35.17.11:10000
    84 HSE 24 Comfort 239.35.134.11:10000
    85 Job TV 24 Comfort 239.35.74.12:10000
    86 QVC Comfort 239.35.12.11:10000
    101 CNN International Comfort 239.35.3.11:10000
    102 EuroNews GB Comfort 239.35.8.11:10000
    105 TV5 Comfort 239.35.18.11:10000


    z.b. n-tv


    #SERVICE 1:0:1:0:0:0:0:0:0:0:rtp%3a//@239.35.79.11%3a10000:n-tv
    #DESCRIPTION n-tv


    funktionierender ÖR sieht so aus, und geht auch


    #SERVICE 1:0:1:6D6B : 437:1:C00000:0:0:0:rtp%3a//@239.35.10.28%3a10000:ZDFinfo
    #DESCRIPTION ZDFinfo

    TunerA: Multifeed
    13°O, 19,2°O, 23,5°O, 28,2°O
    TunerB: LAMINAS OFC-1200
    45°O, 42°O, 40,0°O, 39°O, 36,0O, 33,0°O, 31,0°O, 28.2°O, 26,0°O, 23.5°O, 21,6°O, 19.2°O
    , 16,0°O, 13°O, 10,0°O, 9°O, 7°O, 5°O, 4,8°O, 0,8°W, 4°W, 5°W, 7°W, 8°W, 11,0°W, 12.5°W
    , 15°W, 18,0°W, 22,0°W, 24,5°W, 30°W
    TunerA/B: In Gebrauch
    0,8°W, 9°O, 13°O, 19.2°O, 23.5°O, 28.2°O
    Dreambox: 7000, 7020SI, 7020HD
    Telekom-Entertain

  • Hallo, wo könnte mein Fehler liegen.
    Ich habe eine Axis 207 MV und die läuft auf meiner Dreambox 800se mit der Adresse(rtsp://root:xxxxxx@192.168.178.5/mpeg4/media.amp) perfekt. Auf meiner 8000er läuft gar nichts. Nur so ein Bild bunt zusammengewürfelt aus Bildern vom letzten Sender. Was kann das sein?

    Files

    • screenshot.jpg

      (167.38 kB, downloaded 645 times, last: )

    Keiner ist unnütz, er kann immer noch als schlechtes Beispiel dienen!

  • Hallo!


    Hab mal wieder ein bisschen rumgespielt. Die Serien Links, die irgendwer auf den ersten Seiten des Link Threads gepostet hat, laufen gar nicht (mehr)? Gibt es da neue, um Big Bang usw. zu schauen?


    Hat jemand kroatische Links?


    Wäre super dankbar!!!


    Grüße

    DREAM 7080
    DREAMBOX ONE

  • Wie kann man, während ein IPTV-Stream auf der Dream läuft, die Bitrate anzeigen?
    Mit dem Bitrate-Viewer und dem Traffic-Anzeifer in GP3 gehen nur DVB-S, DVB-S2 und DVB-C (möglicherweise DVB-T auch, habe ich aber nicht!)
    Danke!

    DMM Unstable OE 2.5 - Dreambox OS/GP4/Zombi-Shadow-FHD -- alles immer aktuell -- -- -- Sat in BW: 13.0°E - 19.2°E - 23.5°E - 28.2°E + Kabel UM(BW) + DVB-T2 in NRW

  • geht hier mit sherlock, bild2 ist über sat


    Sherlock-the second Infobar

    Files

    TunerA: Multifeed
    13°O, 19,2°O, 23,5°O, 28,2°O
    TunerB: LAMINAS OFC-1200
    45°O, 42°O, 40,0°O, 39°O, 36,0O, 33,0°O, 31,0°O, 28.2°O, 26,0°O, 23.5°O, 21,6°O, 19.2°O
    , 16,0°O, 13°O, 10,0°O, 9°O, 7°O, 5°O, 4,8°O, 0,8°W, 4°W, 5°W, 7°W, 8°W, 11,0°W, 12.5°W
    , 15°W, 18,0°W, 22,0°W, 24,5°W, 30°W
    TunerA/B: In Gebrauch
    0,8°W, 9°O, 13°O, 19.2°O, 23.5°O, 28.2°O
    Dreambox: 7000, 7020SI, 7020HD
    Telekom-Entertain