Driver DWA D-link 110 for OE2.0

  • i have the wifi pen and it doesn't work for me on OE2.0 :rolleyes:


    this driver is for OE1.6


    can someone make this version for OE2.0?




    Vendor=07d1 ProdID=3c07

  • Maybe another driver is compatible?

    Dreambox DM8000 HD PVR (HDD / DVD-rw / CF & Newnigma2-unstable) - DVB-T | UPC Horizon (Royaal HD).

    Edited once, last by Jeroensky ().

  • Try to find out what chipset is used in your wifi usb dongel.
    Then search for driver in list that supports that chipset.

    Dreambox DM8000 HD PVR (HDD / DVD-rw / CF & Newnigma2-unstable) - DVB-T | UPC Horizon (Royaal HD).

  • Vendor=07d1 ProdID=3c07


    which driver is compatible?
    where is IPK file???



    Quote

    Originally posted by Jeroensky
    Try to find out what chipset is used in your wifi usb dongel.
    Then search for driver in list that supports that chipset.

  • vendor & product id = not used chipset.

    Dreambox DM8000 HD PVR (HDD / DVD-rw / CF & Newnigma2-unstable) - DVB-T | UPC Horizon (Royaal HD).

  • Quote

    Originally posted by farshad673
    Which model (chipset usb wifi) will work without installing any driver on DreaMbox?


    EEh, do check the link that i gave..
    Just click on some drivers.
    When you see something like will be part of x.x.x kernel, and the kernel number is 3.2 or lower, then you know that that driver is supported by the kernel.
    And so any usb device with the chipset that is supported by choosen driver should work.


    A hint: First generation DM8000 uses a ath driver, for Atheros chipsets. So i think a USb wifi module with Atheros chipset will work. See available devices. But because a enigma2 tuner is not a linux desktop i cannot garantee it work. When you get a usb wifi module named in supported devices then ask the store where you buy it, if you can get another type/model/manufactorer if it's not supported by your hardware.


    If you connect wifi usb module, and reflash image, then you'll know soon enough if it works.

    Dreambox DM8000 HD PVR (HDD / DVD-rw / CF & Newnigma2-unstable) - DVB-T | UPC Horizon (Royaal HD).

    Edited 3 times, last by Jeroensky ().

  • Hi,
    look for kernel-module-rt73usb_3.2-r8.13-bsp1_dm800se.ipk in DMM feed or in your package-managements, this may do the job.

  • not work:(


    Quote

    Originally posted by KAMSAT10
    Hi,
    look for kernel-module-rt73usb_3.2-r8.13-bsp1_dm800se.ipk in DMM feed or in your package-managements, this may do the job.

  • There has been some recent changes into the oe2.0 in this regard, do opkg update && opkg upgrade also take into account this as well.


    Quote

    Wlan: some wlan drivers need a long time to get an ip, lets wait after activation

  • Still does not work :rolleyes:


    Quote

    Originally posted by KAMSAT10
    There has been some recent changes into the oe2.0 in this regard, do opkg update && opkg upgrade also take into account this as well.

  • Do U use an usb Hub? If yes, try without the hub... The OE2.0 have problems with some usb hubs...


    Greetz


    -Piwie-

    DM 800 SE (2 x DVB-S2 + DVB-C) + 500 GB HDD + 2 TB HDD @ ruDREAM Line X
    DM 500 HD @ ruDREAM Line X


    KabelDeutschland + 85er Gibertini @ 13°East | 19.2°East | 23.5°East | 28.2°East

  • The OE2.0 work fine now with stick Wlan D-link , the problem was resolved with latest experimentals.

    Dreambox 920 UHD
    Dreambox OS Version: 4.3.2r10-2020-03-31
    Image Version: Experimental 2020-04-03

  • In my case I have rt73 working good on OE2 image dm800


    I will try to see if my other 2 sticks rt3070sta and zd1211b are working


    and will let you know


  • There is a rt73 ipk for OE2 in image and in feeds
    Question is did rt73 work for you on 1.6?????
    In 1.6 images my stick was working and works now on OE2


    It might work for you but my device is different


    T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=480 MxCh= 0
    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=07d1 ProdID=3c03 Rev= 0.01
    S: Manufacturer=Ralink
    S: Product=802.11 bg WLAN
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA
    I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt73
    E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    root@dm800:~#