[Boblight SupportThread] Update: 11-02-2014, Boblight 0.8R6

  • Zitat

    Originally posted by Henno88
    Boblight 0.8r1 ist bei meinem solo2 im feed !!

    \


    Huh, thats not good!
    Beta version, with lot of bugs..


    Final version will come later...


    Gr Speedy

  • Please help me with Lightpack configuration - I'm fighting with it for 10 days without results.
    My device is:
    -DM7020HD with OE2.0 (stock firmware) + GP3.2
    -enigma2-plugin-extensions-boblight-enigma2_0.7r7_Beta_mips32el.ipk
    -Lightpack (hardware: 6.0L, firmware 6.2) <-- I had checked device on W7 Prismatic and it is working.


    First of all some telnet commands which I executed:


    My boblight.conf data is:


    The only possibility to shine leds is to give command via telnet (but this only chcecks if device works):


    and

    Code
    root@dm7020hd:/11111# ./boblight-constant AAAAFF
    Connecting to boblightd
    Connection to boblightd opened
    caught SIGINT
    Exiting


    I have also attached Boblight Enigma2 plugin screenshots

  • @ silelis


    try Network off - you need this only if your Boblightd Server runs on other physic Hardware than your Receiver (such as Raspberry)


    otherwise your boblightd Server process will not running:


    Code
    Connecting to boblightd
    ERROR: SO_ERROR 127.0.0.1:19333 Connection refused
    Waiting 10 seconds before trying again
  • Hallo


    Super Plugin Danke dafür :)


    Ich möchte das bei mir auch versuchen.
    Ist das richtig das ich nur


    -Arduino Uno Board REV 3 Link
    -LED Lichterkette mit WS2811 Chip 50x 8mm RGB LED Link
    benötige? Oder Fehlt noch was


    Ich lese hier auch viel das der Raspberry benutzt wird, brauch ich dann das Arduino Uno Board REV 3 nicht?


    Ich habe ein DM500HD(USB-MOD) und möchte über die das auch nutzen.
    Benötige ich dann noch was?


    Vielen Dank


    MfG
    Sedsa

  • Hi Folks!


    The new version is almost done, now fixing the last bugs and adding some new features.


    - [Fixed] Daemon/Lights hang on startup
    - [Added] (Still in Beta!) Hdmi-Cec option, start/stop lights when tv turns on or off.
    - [Added] (Still in Beta!) Cluster leds, Cluster 2 -> 10 leds as one led, Boblight will see 2 or more leds as one led. This for users with > 50 leds gives a smoother look.
    - [Fixed] Memory Leak
    - [Replaced] New grab function, takes lower cpu usage.
    - [Added] New translation German (Thanks to holymoly IHADForum)
    - [Fixed] Now Lightpack works for firmware < 6.2 and 6.3 or >.
    - [Added] New GUI
    - [Added] Support for coming app to control Boblight-Enigma2 from phone.


    1. I need some Lightpack testers.
    Who have a lightpack device and want to test the new beta ?


    2. Who can support me with some donation to buy a AZBOX863x, AZBOX865x receiver? I want to make bob light support also the AZBOX
    But I need one to test.



    Gr Speedy

  • Great news! Thank you very much for your work.


    I have a DM8000 and don't want to change to an other model.
    Anyhow... a donation is out. Hope you':l get your new hardware soon.

  • Zitat

    Originally posted by deathrattle
    Great news! Thank you very much for your work.


    I have a DM8000 and don't want to change to an other model.
    Anyhow... a donation is out. Hope you':l get your new hardware soon.


    Many Thanks for your donation.!!!

  • Hi speedy,


    good job!
    can you tell us, when the new version is available?


    And an important thing:
    does the blackbar detection work fine now?


    thanks in advance =)

  • Hallo, Ich habe da ein kleines Problem, mit meiner boblight.conf Datei auf mein raspberry.


    zum Aufbau.
    -DM800se mit boblight
    -Raspberry mit Raspbmc und Pibob installiert
    -LED ws2801 Stripes startend von links mit L=21; R=21;T=33;B=34


    Starte ich alles nach Anleitung mit der Testdatei boblight.conf funktioniert alles perfekt. aber nur auf 50 LED begrenzt.


    Dann habe ich mir mit den BoblightConfigTool meine Datei angepasst und mein Raspberry bleibt im connection timeout hängen und nix leuchtet mehr.



    hier meine boblight.conf


    ich hoffe ihr könnt mir da ein kleinen tip geben :)

  • ändere:


    channels 150 > 327
    rate 48000 > 500000 bzw. 1000000
    - musst du testen


    deine Anzahl an LED's - laut deiner Config 109 x 3 = 327 (jede LED 1xR/1xG/1xB=3Chan)


    rate kann/muss (bei mir) wesentlich höher (aktuell 1Mhz) bei direkt per gpio angechlossenen PIX-Stripes

  • Danke schön es funktioniert :)


    das hat einiges an Verständnisfragen geklärt.
    nur frage ich mich, warum mein boblightconfigtool mir die falsche channels geschrieben hatte...???


    ich habe nun die rate auf 1Mhz gestellt
    327 channels
    und
    #[global]
    #interface 127.0.0.1
    #port 19333
    eingegeben
    danke dafür an yammyam per pn


  • I'm a Kickstarter backer and I'm going to get two of them hopefully soon. Will test as much as I can. At the end, I'll connect them to my two OUYAs though.

    VU+ UNO, VTI 5.1.x, 500GB internal HDD, 4GB Stick for PICONS
    Arduino UNO, 50 WS2801 LEDs, Boblight (always the latest version)

  • @ macpaul


    Viel Spass damit - ist auf jeden Fall ein fettes Feature


    Code
    #[global]
    #interface 127.0.0.1
    #port 19333


    brauchst du eigtl. nur wenn du den port ändern willst oder mehrere Netzwerkkarten im Rechner hast


    macht aber auch nix - weil ist eh auskommentiert (#) :winking_face:


    p.s. um die Farbintensität/-treue der LED's inviduell auf den TV einzumessen - mit Handycam, dann Bildbearbeitungsprogramm - gibt es im ComputerbaseForum http://www.computerbase.de/for…ht=colortool#post13467165 einen netten Fred (Ambilight Nachrüstung only)


    das Tool nennt sich ColorTool-0.1.2 - damit stellst du nahezu perfekte Werte bei [color] ein


    dauert zwar ewig - du musst mehrfach abgleichen (ich hab bestimmt 10-15 durchläufe) - aber das Ergebnis überzeugt! :hurra:


    @ Mod/Admin


    falls der Link dahin nicht erlaubt ist bitte entfernen... oder PN ich entferne ihn dann :499:

  • Hallo zusammen,


    ich hab 18 Sedu v2 LED Streifen seit gestern im Einsatz und das Sedu Board v3. Das ganze ist per USB an ein Solo 2 angeschlossen.
    Dort läuft das aktuelle VTi Image und der aktuellste Boblight Plugin r7 oder so Ähnlich.


    Ich hab mir eine config Datei über das Tool erstellt. Am Anfang (3h) lief der Plugin wunderbar.


    Danach habe ich den Receiver neugestartet und es ging ein Rotes Lauflicht an. Nach einigen Reboots ging dieses wieder weg.
    Jetzt bekomme ich während des Betriebes ein Flackern und auf einmal geht das Lauflicht an und nicht wieder weg.


    Außerdem habe ich das Problem dass die LEDs nach dem Einschalten des Receivers auch nur ein Rotes Umlauflicht darstellen.
    Die LEDs ließen sich auch nicht manuell einschalten.
    Ich musste zunächst über das Boblight GUI einen RGB Test durchführen. Danach gingen sie über das Plugin manuell einschalten.
    Mir kommt es so vor als connceted sich der Receiver nicht richtig mit dem Sedu Board nach einem Reboot.



    An was kann das liegen?


    Vielen dank im Voraus für eure Unterstützung.

  • Hi there,


    I Sedu v2 18 LED Strip since yesterday in use and the Sedu Board v3. The whole thing is connected via USB to a solo 2 .
    Runs where the current image and the latest VTi Boblight Plugin r7 or something similar .


    I've created a config file with the tool . In the beginning (3h ) of the plugin was wonderful .


    After that I rebooted the receiver and it went to a red running light . After a few reboots this went away .
    Now I get a flickering during operation and at once goes to the chase and not back away .


    I also have the problem that the LEDs represent only a red light circulation after turning on the receiver.
    The LEDs also could not be switched on manually .
    I had to perform an RGB test first on the Boblight GUI. After that they went on manually via the plugin.
    It seems to me before when connceted the receiver does not correctly with the Sedu Board after a reboot .


    Here is my boblight.conf


    #[global]
    interface 127.0.0.1
    port 19333


    [device]
    name ambilight
    output /dev/ttyUSB0
    channels 768
    type momo
    interval 10000
    prefix 5A B0
    postfix A5
    rate 500000


    [color]
    name red
    rgb FF0000
    gamma 1
    adjust 1.0
    blacklevel 0.0


    [color]
    name green
    rgb 00FF00
    gamma 1
    adjust 1
    blacklevel 0.0


    [color]
    name blue
    rgb 0000FF
    gamma 1
    adjust 1
    blacklevel 0.0


    [light]
    name 001
    color red ambilight 1
    color green ambilight 2
    color blue ambilight 3
    hscan 0 10
    vscan 77 88


    [light]
    name 002
    color red ambilight 4
    color green ambilight 5
    color blue ambilight 6
    hscan 0 10
    vscan 66 77


    [light]
    name 003
    color red ambilight 7
    color green ambilight 8
    color blue ambilight 9
    hscan 0 10
    vscan 55 66


    [light]
    name 004
    color red ambilight 10
    color green ambilight 11
    color blue ambilight 12
    hscan 0 10
    vscan 44 55


    [light]
    name 005
    color red ambilight 13
    color green ambilight 14
    color blue ambilight 15
    hscan 0 10
    vscan 33 44


    [light]
    name 006
    color red ambilight 16
    color green ambilight 17
    color blue ambilight 18
    hscan 0 10
    vscan 22 33


    [light]
    name 007
    color red ambilight 19
    color green ambilight 20
    color blue ambilight 21
    hscan 0 10
    vscan 11 22


    [light]
    name 008
    color red ambilight 22
    color green ambilight 23
    color blue ambilight 24
    hscan 0 10
    vscan 0 11


    [light]
    name 009
    color red ambilight 25
    color green ambilight 26
    color blue ambilight 27
    hscan 6 13
    vscan 0 20


    [light]
    name 010
    color red ambilight 28
    color green ambilight 29
    color blue ambilight 30
    hscan 13 20
    vscan 0 20


    [light]
    name 011
    color red ambilight 31
    color green ambilight 32
    color blue ambilight 33
    hscan 20 26
    vscan 0 20


    [light]
    name 012
    color red ambilight 34
    color green ambilight 35
    color blue ambilight 36
    hscan 26 33
    vscan 0 20


    [light]
    name 013
    color red ambilight 37
    color green ambilight 38
    color blue ambilight 39
    hscan 33 40
    vscan 0 20


    [light]
    name 014
    color red ambilight 40
    color green ambilight 41
    color blue ambilight 42
    hscan 40 46
    vscan 0 20


    [light]
    name 015
    color red ambilight 43
    color green ambilight 44
    color blue ambilight 45
    hscan 46 53
    vscan 0 20


    [light]
    name 016
    color red ambilight 46
    color green ambilight 47
    color blue ambilight 48
    hscan 53 60
    vscan 0 20


    [light]
    name 017
    color red ambilight 49
    color green ambilight 50
    color blue ambilight 51
    hscan 60 66
    vscan 0 20


    [light]
    name 018
    color red ambilight 52
    color green ambilight 53
    color blue ambilight 54
    hscan 66 73
    vscan 0 20


    [light]
    name 019
    color red ambilight 55
    color green ambilight 56
    color blue ambilight 57
    hscan 73 80
    vscan 0 20


    [light]
    name 020
    color red ambilight 58
    color green ambilight 59
    color blue ambilight 60
    hscan 80 86
    vscan 0 20


    [light]
    name 021
    color red ambilight 61
    color green ambilight 62
    color blue ambilight 63
    hscan 86 93
    vscan 0 20


    [light]
    name 022
    color red ambilight 64
    color green ambilight 65
    color blue ambilight 66
    hscan 93 100
    vscan 0 20


    [light]
    name 023
    color red ambilight 67
    color green ambilight 68
    color blue ambilight 69
    hscan 90 100
    vscan 11 22


    [light]
    name 024
    color red ambilight 70
    color green ambilight 71
    color blue ambilight 72
    hscan 90 100
    vscan 22 33


    [light]
    name 025
    color red ambilight 73
    color green ambilight 74
    color blue ambilight 75
    hscan 90 100
    vscan 33 44


    [light]
    name 026
    color red ambilight 76
    color green ambilight 77
    color blue ambilight 78
    hscan 90 100
    vscan 44 55


    [light]
    name 027
    color red ambilight 79
    color green ambilight 80
    color blue ambilight 81
    hscan 90 100
    vscan 55 66


    [light]
    name 028
    color red ambilight 82
    color green ambilight 83
    color blue ambilight 84
    hscan 90 100
    vscan 66 77


    [light]
    name 029
    color red ambilight 85
    color green ambilight 86
    color blue ambilight 87
    hscan 90 100
    vscan 77 88


    [light]
    name 030
    color red ambilight 88
    color green ambilight 89
    color blue ambilight 90
    hscan 90 100
    vscan 88 100


    [light]
    name 031
    color red ambilight 91
    color green ambilight 92
    color blue ambilight 93
    hscan 86 93
    vscan 80 100


    [light]
    name 032
    color red ambilight 94
    color green ambilight 95
    color blue ambilight 96
    hscan 80 86
    vscan 80 100


    [light]
    name 033
    color red ambilight 97
    color green ambilight 98
    color blue ambilight 99
    hscan 73 80
    vscan 80 100


    [light]
    name 034
    color red ambilight 100
    color green ambilight 101
    color blue ambilight 102
    hscan 66 73
    vscan 80 100


    [light]
    name 035
    color red ambilight 103
    color green ambilight 104
    color blue ambilight 105
    hscan 60 66
    vscan 80 100


    [light]
    name 036
    color red ambilight 106
    color green ambilight 107
    color blue ambilight 108
    hscan 53 60
    vscan 80 100


    [light]
    name 037
    color red ambilight 109
    color green ambilight 110
    color blue ambilight 111
    hscan 46 53
    vscan 80 100


    [light]
    name 038
    color red ambilight 112
    color green ambilight 113
    color blue ambilight 114
    hscan 40 46
    vscan 80 100


    [light]
    name 039
    color red ambilight 115
    color green ambilight 116
    color blue ambilight 117
    hscan 33 40
    vscan 80 100


    [light]
    name 040
    color red ambilight 118
    color green ambilight 119
    color blue ambilight 120
    hscan 26 33
    vscan 80 100


    [light]
    name 041
    color red ambilight 121
    color green ambilight 122
    color blue ambilight 123
    hscan 20 26
    vscan 80 100


    [light]
    name 042
    color red ambilight 124
    color green ambilight 125
    color blue ambilight 126
    hscan 13 20
    vscan 80 100


    [light]
    name 043
    color red ambilight 127
    color green ambilight 128
    color blue ambilight 129
    hscan 6 13
    vscan 80 100


    [light]
    name 044
    color red ambilight 130
    color green ambilight 131
    color blue ambilight 132
    hscan 0 6
    vscan 80 100




    In what may lie ?


    Many thanks in advance for your support.

  • @ cschum
    lad dir das hier


    sedu an den pc und mit passendem port verbinden


    erst mal read eeprom
    programm auf none oder so stellen
    save eeprom


    dann sollte das mit den roten leds weg sein.




    EDIT: 0.8 r2 ist im feed gelandet !