[Boblight SupportThread] Update: 11-02-2014, Boblight 0.8R6

  • andy6090


    Hallo, ich habe Deinen Beitrag mit großem Interesse gelesen, wo Du erwähnst, dass Du die Berechnung des Ambilights ausgelagert hast. Ich hoffe ich habe das so richtig verstanden. Da ich mit meiner DM7020HD, Sedulight incl. der LED Strips auch das Problem der verzögerten Farbdarstellung beim Bildwechsel habe interessiert mich das doch.


    Könntest Du das Verfahren des Auslagerns näher beschreiben? Gibt es eventuell Beiträge (hoffentlich in Deutsch) wo ich zum Thema nachlesen könnte?


    Danke, Gruß made

    DM7020HD, Wavefrontier T90, Amos-Sirius-Astra 19.2-Astra 31.5, Samsung SPF87H, Qnap 219P

  • @ speedyisfast


    Congratulations, very good beta version. Works great. No more delay problem.


    Thank you


    Excuse my bad english. Googel translator is my friend.


    Gruß made

    DM7020HD, Wavefrontier T90, Amos-Sirius-Astra 19.2-Astra 31.5, Samsung SPF87H, Qnap 219P

    Einmal editiert, zuletzt von made1451 ()

  • Hey Speedy, nice beta!


    Delay an 3D Mode seems to works very good :hurra:


    But my Solo2 freezes while booting from deep standby (front display "Vu Solo2")
    Killing boblight via putty helps. Can you look into that?


    Greetings, Lobot


  • i will look to that.
    Thanks!

  • on my Solo2 all my Sedu LED´s are just white.


    edit:


    reinstall fixed it!


    Wow Speedy its realy fast now !!!
    Thanks for this epic plugin !!

  • Zitat

    Originally posted by tomster
    what does that mean?


    Use BobightRemote (android app): an
    Port fpr BoblightRemote: 50000


    greets
    Tom


    a new app for android that can control this boblight for enigma2.
    it will be ready in august i think.


    Gr speedy

  • yeah, just found this,


    Zitat

    - Added, option to use the new coming (august 2013) app for android BobControl (Change light settings and more live on your android phone)


    Wow, sounds cool, i already use bobdroid wich is real fun.


    Evrything good here so far with 0.7R2 on NN OE2.0 8k


    greetz

  • Hi Folks!


    Reuploaded the 0.7R2

    - Fixed also the creator, it use now floats instead of int.


    The picture on tv wasn't sync with the color on the wall
    bottom was shifted to right of left en top was also a little shifted to right.
    But this is fixed now. Make a new config with the configcreator or use the BoblightConfigTool from krautmaster.


    Check your boblight.conf file if it use int's or floats.


    100 / 29 leds = 3.88 # this is float, good
    100 / 29 leds = 3 # int, this is wrong


    i have also contacted krautmaster if he will change his BoblightConfigTool to floats.


    [Boblight UpdateThread] Update: 24-05-2013, Boblight 0.7R2


    Kind regards Speedy1985

  • Hi,
    the 0.6r17_mipsel.ipk worked for me but I had some delay with the SD TV Programms. Therefore I installed the beta 0.7r2.
    Istallation worked and after the reboot the ligths were on but no sync. By trying to enter the plugin-gui I get a green screen. I than deleted the conf file, reboot but again green screen by entering the gui.
    After that I tried to install the old 0.6 r17 but that even didnt work because of a bad magic number error.
    So at the moment no boblight is working for me. Two question, what to do the beta running? How could i come back to the last working 0.6r17.
    Thank you for your help. Regards sven
    Below my last working conf file from 0.6r17



    [global]
    interface 127.0.0.1
    port 19333



    ### >> Adalight 50 lights << ###


    [device]
    name ambilight
    output /dev/ttyACM0
    channels 150
    prefix 41 64 61 00 31 64
    rate 115200
    debug off
    type momo
    interval 20000


    #
    # Light section


    [color]
    name red
    rgb FF0000
    gamma 2.0
    adjust 0.65
    blacklevel 0.1


    [color]
    name green
    rgb 00FF00
    gamma 2.0
    adjust 1.0
    blacklevel 0.1


    [color]
    name blue
    rgb 0000FF
    gamma 2.0
    adjust 0.7
    blacklevel 0.1


    ################# Left ########################
    [light]
    name 001
    color red ambilight 1
    color green ambilight 2
    color blue ambilight 3
    hscan 41.2 47.08
    vscan 90.91 100


    [light]
    name 002
    color red ambilight 4
    color green ambilight 5
    color blue ambilight 6
    hscan 35.31 41.19
    vscan 90.91 100

    ...
    DM800SE, newnigma2 V3.3.2 2012-03-28, adalight with 50 lamps, last working boblight version: enigma2-plugin-extensions-boblight-enigma2_0.6r17_mipsel.ipk

    Einmal editiert, zuletzt von zwehn ()

  • Zitat

    #This conf is configured for 16 channels, each side have 4 lights, is 16. this wil be 16*3 = 48 channels.


    Zitat

    DM800SE, newnigma2 V3.3.2 2012-03-28, adalight with 50 lamps, last working boblight version: enigma2-plugin-extensions-boblight-enigma2_0.6r17_mipsel.ipk


    With 50 RGB Leds you have 150 channels not 48

  • Hey Speedy!


    now reboot works fine on Solo2, thanks! :]


    New config-generator works too. I now can use the full resolution of my 122 LEDs, without combining 2 to get down to 61. :hurra:


    But CPU load is evil... boblightd and boblight-enigma are running with 38% an 36% with 25fps, 10% Margin, 122LEDs, Resolution 128px on SD TV :face_with_rolling_eyes:
    Resolution down to 64px = 34%/21%


    But it works... :grinning_squinting_face:


    Except some white flashes now and then. Where are these coming from?


    Can you explain, what margin in color settings does? I thought, you set horizontal an vertical margin in config creator?


    But once again: NICE WORK! :thx2:


    Greetings, Lobot

  • problem, Impossible change ip interface option (4) NETWORK SETTINGS,Daemon ip adress: 127.0.0.1 or ex: 192.168.10.12.

  • Hi sterretje, that was an old comment not the reason for the problem... Thanks sven

    ...
    DM800SE, newnigma2 V3.3.2 2012-03-28, adalight with 50 lamps, last working boblight version: enigma2-plugin-extensions-boblight-enigma2_0.6r17_mipsel.ipk

    Einmal editiert, zuletzt von zwehn ()

  • Hi henno, i had a similar problem in addittion i get a green sceeen by starting the gui of boblight. What do you mean whith reinstall in detail? See also my posting.Regards sven

    ...
    DM800SE, newnigma2 V3.3.2 2012-03-28, adalight with 50 lamps, last working boblight version: enigma2-plugin-extensions-boblight-enigma2_0.6r17_mipsel.ipk