[Boblight SupportThread] Update: 11-02-2014, Boblight 0.8R6

  • Hallo,


    ich nutze schon länger ein Adalight mit Arduino Uno und 50 LEDs zusammen mit XBMC.


    Jetzt habe ich boblight (0.5-r9) auf der 7020HD (mit OE2.0) installiert und hab damit leider ein paar Probleme:
    1. Sobald die Box einmal im Standby war, verbraucht boblighd 100% cpu und die Box wird unbedienbar. Manchmal passiert es auch schon wenn ich die 7020HD in den Standby versetzte und mit xbmc zu boblightd verbinden will.
    2. Über die Dreambox sehe ich recht oft ein flackern, manchmal blinken auch die ersten beiden LED's im Strang blau? Läuft alles komplett in XBMC habe ich nur sehr selten mal ein flackern.


    Kann mir da jemand helfen an was das liegen könnte?


    mfg weghn

  • auf die neue version warten... dann wird's besser :winking_face:


    wenn die CPU-Auslastung 100% ist, dann die box neustarten und vermeiden, über GUI (boblight-plugin) einstellungen zu ändern.. denn jedesmal wird ein event für standby (sleep-wakeup) geadded, so dass nach einem standby mehrere boblight-prozesse laufen.


    Die Einstellungen ändere ich z.zt. direkt in der settings datei im "/etc/enigma2"


    config.plugins.Boblight_grab.saturation=1.4
    config.plugins.Boblight_grab.value=3
    config.plugins.Boblight_grab.threshold=0
    config.plugins.Boblight_grab.speed=80
    config.plugins.Boblight_grab.address=192.168.0.100:19333
    config.plugins.Boblight_grab.priority=20




    ich benutze boblight auf vu+ und xbmc-player.


    auf xbmc laufen boblightd und boblight-X11 (mit prio 128), dim-screensaver (3min). wenn ich auf die vu+ umschalte, übernimmt boblight-enigma2 (prio 20) die kontrolle. wenn ich auf die xbmc gehe, schalte ich die vu+ aus, so dass boblight-enigma2 autom. durch den controll-script gekillt wird.

  • auf xbmc laufen bei mir (über rc.local gestartet)



    ...
    sh -c 'su - xbmc -c "boblightd -f"'
    sh -c 'su - xbmc -c "DISPLAY=:0.0 boblight-X11 -o value=5 -o saturation=1.1 -o threshold=30 -o speed=70 -o interpolation=true -f"'
    ....



    wenn man bei boblight-X11 den Paramater "-p" nicht gibt, wird der Defaultwert von 128 genommen. Wenn bei Dir xbmc höheren Prio haben soll:


    sh -c 'su - xbmc -c "DISPLAY=:0.0 boblight-X11 -o value=5 -o saturation=1.1 -o threshold=30 -o speed=70 -o interpolation=true -f -p 1"'



    wichtig: ich benutze NUR boblight-X11, kein boblight-plugin!!


    das boblight-plugin unter xbmc funktioniert (zumindest bei mir) NUR bei Filmwiedergabe, also keine Funktion bei Musik (Visualisierung) oder bei den Menüs.


    die Vu+ box connectet sich gegen boblightd auf xbmc mit prio 20, so dass sie bevorzugt wird. Schalte ich die Vu+ auf standby um, wird xbmc bedient (vorausgesetzt, der Prozess boblight-enigma2 wird auf der vu+ gekillt)


    Warum threshold=0? hmmm, hatte normalerweise auch dort den Wert 30 drin :)




    viel angenehmer finde ich, den boblight-X11 auf xbmc über


    /etc/X11/Xsession.d/60x11-common_localhost


    zu starten... wird immer mit der X-Session gestartet.



    boblight-X11 -o value=5 -o saturation=1.1 -o threshold=30 -o speed=70 -o interpolation=true -f

  • HD-Filme gucken ist bei mir seit dem ich Boblight installiert habe nicht mehr möglich.


    Die Filme stottern nur noch. Auch nach einem Neustart verändert sich nichts.


    Das Sedu-Board ist noch nicht mal angeschlossen.

  • Hi, All.


    Update! :hurra:


    First, i can tell you that the opensource project is now on github. http://www.github.com/speedy1985
    So anyone who wants to help is welcome.


    And i have attached the last version 0.5r12.
    This version (mips32el) can be installed on oe2.0 and (mipsel) oe1.6.


    First uninstall the old version and do a reboot.


    New features:


    - Now you can connect to a other deamon over network, from the pluginmenu.
    - New setup button for people the don't like telnet/ssh :)
    - Moodlamp :winking_face:
    - Better setup
    - Blackbar detection (some times not good working, maybe later. for now set depth in boblight.conf to 30.)
    - Recording problem fixed.
    - Cleanup the code.
    - /dev/ttyusb0 or /dev/ttyacm0 detection problem fixed


    After setup, use the setup button in the pluginmenu, and then reboot your box.
    After that it must work.


    Kind regards Speedy


    If you like my work, please buying me a beer, it helps me doing more awesome things :face_with_tongue:

  • Hi,


    first of all: thank you for all your effort you put into this project :danke:


    Do you mind to add the Gigablue boxes as supported STB? They also run oe2 and are able to run most dreambox plugins.
    Would be very happy! =)

  • Zitat

    Original von DroiZer
    Hi,


    first of all: thank you for all your effort you put into this project :danke:


    Do you mind to add the ...... boxes as supported STB? They also run oe2 and are able to run most dreambox plugins.
    Would be very happy! =)


    Have you tryed ?
    I have added it. i hink :winking_face:


    what is yout output ? cat /proc/stb/info/chipset


    Kind regards speedy

    • Offizieller Beitrag

    Stop!!


    Not support for othrers as Dreambox here!!! :face_with_rolling_eyes:
    Board Rules


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert

  • I get this error with the new version, the old mipsel32 with version r9 works.


    Code
    root@dm7020hd:/var/volatile/tmp# opkg install enigma2-plugin-extensions-boblight-enigma2_0.5-r12-b1-all_mipsel.ipk
    Unknown package 'enigma2-plugin-extensions-boblight-enigma2'.
    Collected errors:  * pkg_hash_fetch_best_installation_candidate: Packages for enigma2-plugin-extensions-boblight-enigma2 found, but incompatible with the architectures configured
      * opkg_install_cmd: Cannot install package enigma2-plugin-extensions-boblight-enigma2.
  • Mit der o.e 1.6 von ozoon läuft es nich bei der installation kommen schon fehlermeldungen
    Das Menue passt auch nich wenn ich dann netzwerk einstellung anwähle stürtzt das Boblight ab

    Dateien

    MFG Ralf631 :grinning_squinting_face:
    DM900 DM8000 mit Scythe Kama 92mm DFS922512M-PWM
    Lüfter und SAMSUNG SN-T083A Brenner und Atmolight
    LCD4linux-Plugin mit zwei Farbdisplays
    110´er Schüssel mit stab100 motor
    DM800
    >DM500+DM7000 in Rente<
    Hyricanpaytv das war ne schöne zeit

  • gestern abend festgestellt, die aktuelle r12 hat öfter abstürze (bobglight-enigma2 startet, meldet dann segmentation fault). irgendwo logfiles?



    die vorherige testversion von r12 war stabiler.

  • The Ambilight features of the plugin seem to work quite good. Well done.


    But as soon as I press "1" for the Moodlight Setup, I get a green screen and my dreambox restarts.


    Kind regards
    squooshie

  • hi speedyisfast!


    I have a problem with boblight (kartelight 8ch) on my 800se in combination with sundtek usb tuner.


    If I start enigma2 it hangs.


    If I remove boblight I can use sundtek drivers.


    If I remove sundtek I can use boblight.


    But not together.


    Can you help please?


    Best regards
    Mag