Hab bei mir das Problem das das weiß einen Blaustich hat kann mir jemand sagen wie ich das ändern kann?
[Boblight SupportThread] Update: 11-02-2014, Boblight 0.8R6
-
-
Hi stadtkind, hatten wir nicht schon mal das Thema - egal. Spiele mal mit dem Adjust in der config der "Color" rum. Hat bei mir zumindest geholfen.
Mann dieses Board hat ja so viele Smileys, da wirste ja echt bölde. ((((( -
This version is better, with some new features.
- Value minimal added: Now you can set a value from 0.0 to 1.0 for lower brightness. DEFAULT 0.0
- Value maximal added: You can set a maximal brightness from 0.0 to 1.0 DEFAULT 1.0
- Value: You can set a brightness from 0.0 to 20.0 DEFAULT 1.0- Saturation maximal: You can set a maximal saturation from 0.0 to 1.0 DEFAULT 1.0
- Saturation minimal: You can set a minimal saturation from 0.0 to 1.0 DEFAULT 0.0
- You can Start/Stop Boblight with blue, Choose Boblight | Enabled / Disabled
Play with it !- Only one problem, The autostart function is gone for now. The deamon cannot start before all things loaded on the box. Mayby in future
Kind regards Speedy
-
kein autostart? heisst das man muss nun immer manuel starten?
lohnt sich das updaten? -
Also Autostart an sich funktioniert - zumindest bei mir - mit der Version von gestern!
Blieb zwar manchmal aber alles in allem hats gut funktioniert!Update: Ah seh grad erst das es nicht mehr funktioniert .... dann alles zurück!
-
Hi speedyisfast,
die Version ist perfekt (für mich)!
Hab zwar noch nicht alle Parameter durchgetestet, aber auf jeden Fall kann man
jetzt die Helligkeit differenzierter einstellen.big big THX
-
Was habt ihr denn bei Geschwindigkeit, Helligkeit, Sättigung und Co eingestellt?
Bin mir da noch nicht ganz sicher wie es wohl optimal ist.
-
Zitat
Original von stadtkind
kein autostart? heisst das man muss nun immer manuel starten?
lohnt sich das updaten?I have tryed everything yesterday. The problem is that the deamon needs to start if enigma2 or everything is loaded. not before.
Who can help with this ?
I put the startup script in /etc/rc3.d.
But then it will load at the beginning.Kind regards Speedy
-
Squooshie
bin selber noch am spielen, aber meistens passen die Einstellungen eines Users eh nicht beim Anderen, da unterschiedliche Auffassung/Bedürfnisse.
was ich aber eben entdeckt habe ->sendet ein Sender mit 16:9 der aber ein 4:3 Movie enthält mit schwarzen Balken links und rechts
so spinnen die dazugehörigen Stripes mit grün oder violett. Habe das Problem vorerst gelöst indem ich den h- und vscan Wert in der config auf 30% erhöht habe (0-30 und 70-100).
Da ich aber das Bildmaterial nicht so tief auslesen möchte wäre es schön wenn Du da eine automatische Abfrage einbauen könntest!
edit: es liegt am Value min Wert, dreht man den z.B. auf 0.4 kann man die Farbstärke der einzelnen Farben gegeneinander ausgleichen - also für mich ein wichtiger Parameter damit weiß nicht so dominant ist. Nur mit dem oben beschriebenen Problem, daß bei schwarz was voher Leds aus bedeutet nun grünes Licht erscheint!teste nun weiter
edit: beim umschalten auf einen anderen Sender blitzen die Leds ab und zu kurz auf.
-
Zitat
Original von holymoly
speedyisfastsendet ein Sender mit 16:9 der aber ein 4:3 Movie enthält mit schwarzen Balken links und rechts
so spinnen die dazugehörigen Stripes mit grün oder violett. Habe das Problem vorerst gelöst indem ich den h- und vscan Wert in der config auf 30% erhöht habe (0-30 und 70-100).
Da ich aber das Bildmaterial nicht so tief auslesen möchte wäre es schön wenn Du da eine automatische Abfrage einbauen könntest!
edit: es liegt am Value min Wert, dreht man den z.B. auf 0.4 kann man die Farbstärke der einzelnen Farben gegeneinander ausgleichen - also für mich ein wichtiger Parameter damit weiß nicht so dominant ist. Nur mit dem oben beschriebenen Problem, daß bei schwarz was voher Leds aus bedeutet nun grünes Licht erscheint!teste nun weiter
edit: beim umschalten auf einen anderen Sender blitzen die Leds ab und zu kurz auf.
Ok, so if you set the valuemin to 0.4 then it would blink and have green stripes ??
And whit 0.0 not ?
-
Nein, es blitz auch bei value min 0.0 !
Wichtiger wäre mir das grüne Licht bei schwarzem Bildinhalt und Value min 0.4 weg zubekommen.
Dann würde das Plug nach meinen Wünschen funktionieren.hier mal meine Einstellungen für das KL16!
-
Hallo zusammen,
gibt es einen Befehl mit dem ich rausfinden kann welche Version des Plugins tatsächlich installiert ist?
Leider wird zumindest bei mir nie die Versionsnummer geupdatet wenn ich das Plugin im Erweiterungsmenü aufrufe?Habe auch festgestellt, dass bei mir der Autostart nach wie vor funktioniert obwohl ich die neueste Version drüber installiert habe....
Grüße
-
I installed the latest version of your plugin.
Now i have 3 boblight prozesses running, but i only started it once via the plugin menue.
Could this be a bug?
-
Hi Speedyisfast ,
Finally solved .
The problem is that you necessarily need the ligpng15.so.15 library, but it is not installed by the libc6 library dependency problems less than 2.20 on images OE1.6 ( OE2.0 not tested )Telnet:
root@vuultimo:~# cd /usr/bin
root@vuultimo:/usr/bin# boblightd -f
boblightd: error while loading shared libraries: libpng15.so.15: cannot open shared object file: No such file or directory
root@vuultimo:/usr/bin#That is we're going to fire up the daemon boblightd and behold the error
unzip the library and force it /usr/lib, permissions 755 and 777 link.root@vuultimo:/usr/bin# boblightd -f
boblightd (c) 2009 bob loosen (modded by Martijn Vos - see source for more information)root@vuultimo:/usr/bin# (InitLog) start of log /home/root/.boblight/boblightd.log
(PrintFlags) starting boblightd -f
(CConfig::LoadConfigFromFile) opening /etc/boblight.conf
(CConfig::CheckConfig) checking config lines
(CConfig::CheckConfig) config lines valid
(CConfig::BuildConfig) building config
(CConfig::BuildConfig) built config successfully
(main) starting devices
(CClientsHandler::Process) opening listening socket on 127.0.0.1:19333
(CDevice::Process) Calamar: starting with output "/dev/ttyACM0"
(CDevice::Process) Calamar: setting up
(CDevice::Process) calamar: setup succeededmy error by not using console .
Thank you -
Hallo zusammen,
Ich bekomme jedesmal diese Fehlermeldung
sobald ich das Boblight starteWelcome on your Vu+ !
root@vuultimo:~# /etc/init.d/boblight-control start
sh: 5: unknown operand
Checking if Boblightd is running: Boblightd is not running! starting deamon....
/usr/bin/boblightd: error while loading shared libraries: libpng15.so.15: cannot
open shared object file: No such file or directory
Starting Grabber...
root@vuultimo:~# /usr/bin/boblight-enigma2: error while loading shared libraries
: libpng15.so.15: cannot open shared object file: No such file or directorywass mache ich falsch ich verstehe es nicht mehr?
Gruß
-
PS: wenn ich diesen (/usr/bin/boblight-dev.sh) kommando eingebe ibekomme ich immer folgende Fehlermeldung woran kann es liegen?
root@vuultimo:~# /usr/bin/boblight-dev.sh
Configuring Boblight...Update feeds...
Try to install cdc-acm module...
Package kernel-module-cdc-acm (3.1.1-r17) installed in root is up to date.Try to install ftdi-sio module...
Package kernel-module-ftdi-sio (3.1.1-r17) installed in root is up to date.Try to install libusb and libpng...
Installing libpng12-0 (1.2.42-r2.0) to root...
Collected errors:
* Package libpng12-0 md5sum mismatch. Either the opkg or the package index are
corrupt. Try 'opkg update'.
* Cannot find package libpng12-0.
Package libusb-0.1-4 (1:0.1.2-r0) installed in root is up to date.
Package libusb-1.0-0 (1.0.4-r0) installed in root is up to date.
Package usbutils (0.73-r3) installed in root is up to date.
Reload rules...
Set permissions...Boblight installed...
>>>>Sometimes your atmolight/karatelight.... is not /dev/ttyUSB0 then it's /dev/
ttyACM0<<<<You can now use the Plugin. Please restart Enigma2 or reboot box.
Don't forget to set your device in the /etc/boblight.conf file, others boblight
will not work...
root@vuultimo:~# opkg update
Downloading http://vuplus-support.org/open…vti/20120824_vti-4.2/all/
Packages.gz
Inflating http://vuplus-support.org/open…i/20120824_vti-4.2/all/Pa
ckages.gz
Updated list of available packages in /var/lib/opkg/VTI-all
Downloading http://vuplus-support.org/open…vti/20120824_vti-4.2/mips
el/Packages.gz
Inflating http://vuplus-support.org/open…i/20120824_vti-4.2/mipsel
/Packages.gz
Updated list of available packages in /var/lib/opkg/VTI-mipsel
Downloading http://vuplus-support.org/open…vti/20120824_vti-4.2/vti-
plugins/Packages.gz
Inflating http://vuplus-support.org/open…i/20120824_vti-4.2/vti-pl
ugins/Packages.gz
Updated list of available packages in /var/lib/opkg/VTI-plugins
Downloading http://vuplus-support.org/open…vti/20120824_vti-4.2/vuul
timo/Packages.gz
Inflating http://vuplus-support.org/open…i/20120824_vti-4.2/vuulti
mo/Packages.gz
Updated list of available packages in /var/lib/opkg/VTI-vuultimo
root@vuultimo:~# /usr/bin/boblight-dev.sh
Configuring Boblight...Update feeds...
Try to install cdc-acm module...
Package kernel-module-cdc-acm (3.1.1-r17) installed in root is up to date.Try to install ftdi-sio module...
Package kernel-module-ftdi-sio (3.1.1-r17) installed in root is up to date.Try to install libusb and libpng...
Installing libpng12-0 (1.2.42-r2.0) to root...
Collected errors:
* Package libpng12-0 md5sum mismatch. Either the opkg or the package index are
corrupt. Try 'opkg update'.
* Cannot find package libpng12-0.
Package libusb-0.1-4 (1:0.1.2-r0) installed in root is up to date.
Package libusb-1.0-0 (1.0.4-r0) installed in root is up to date.
Package usbutils (0.73-r3) installed in root is up to date.
Reload rules...
Set permissions...Boblight installed...
>>>>Sometimes your atmolight/karatelight.... is not /dev/ttyUSB0 then it's /dev/
ttyACM0<<<<You can now use the Plugin. Please restart Enigma2 or reboot box.
Don't forget to set your device in the /etc/boblight.conf file, others boblight
will not work...
root@vuultimo:~#Gruß
-
Schau dir mal diesen Workaround an - libpng sollte ja bei Dreambox und VU die gleiche sein.
-
Solution you have _nico , I not read before and have problems
doncologne follow step _nico100% running on VU+ OE1.6
Thank you
-
Thanks calamaresrellenos7 and _nico
Danke es klappt /fast mit dem Plugin wenn bloss alle LED leuchten würden bin seid 2 stunden die confis am testen mit Boblightconfigtool.
da kann mann eigentlich nichts falsch machen:D
bei mir leuchten nur die unteren Led`s die oberen bleiben dunkel
Beim Boblightcontrol habe ich jeweils 30 beim Channel TOP und Channel Sub eingegeben weil jeweils 3 LED lampen drin sind ist es korrekt?Ich habe ein 50 Zoll Plasma mit jeweil mit
5 stripes links rechts
und jeweils 10 stripes oben und untenmeine Boblightconfig sieht so aus erkennt jemand einen Fehler?
#[global]
interface 127.0.0.1
port 19333[device]
name ambilight
output /dev/ttyUSB0
channels 768
type momo
interval 10000
prefix 5A B0
postfix A5
rate 500000[color]
name red
rgb FF0000
gamma 2.0
adjust 0.65
blacklevel 0.0[color]
name green
rgb 00FF00
gamma 2.0
adjust 1.0
blacklevel 0.0[color]
name blue
rgb 0000FF
gamma 2.1
adjust 0.7
blacklevel 0.0[light]
name Left1
color red ambilight 1
color green ambilight 2
color blue ambilight 3
hscan 0 10
vscan 86 93[light]
name Left2
color red ambilight 4
color green ambilight 5
color blue ambilight 6
hscan 0 10
vscan 80 86[light]
name Left3
color red ambilight 7
color green ambilight 8
color blue ambilight 9
hscan 0 10
vscan 73 80[light]
name Left4
color red ambilight 10
color green ambilight 11
color blue ambilight 12
hscan 0 10
vscan 66 73[light]
name Left5
color red ambilight 13
color green ambilight 14
color blue ambilight 15
hscan 0 10
vscan 60 66[light]
name Left6
color red ambilight 16
color green ambilight 17
color blue ambilight 18
hscan 0 10
vscan 53 60[light]
name Left7
color red ambilight 19
color green ambilight 20
color blue ambilight 21
hscan 0 10
vscan 46 53[light]
name Left8
color red ambilight 22
color green ambilight 23
color blue ambilight 24
hscan 0 10
vscan 40 46[light]
name Left9
color red ambilight 25
color green ambilight 26
color blue ambilight 27
hscan 0 10
vscan 33 40[light]
name Left10
color red ambilight 28
color green ambilight 29
color blue ambilight 30
hscan 0 10
vscan 26 33[light]
name Left11
color red ambilight 31
color green ambilight 32
color blue ambilight 33
hscan 0 10
vscan 20 26[light]
name Left12
color red ambilight 34
color green ambilight 35
color blue ambilight 36
hscan 0 10
vscan 13 20[light]
name Left13
color red ambilight 37
color green ambilight 38
color blue ambilight 39
hscan 0 10
vscan 6 13[light]
name Left14
color red ambilight 40
color green ambilight 41
color blue ambilight 42
hscan 0 10
vscan 0 10[light]
name Top1
color red ambilight 43
color green ambilight 44
color blue ambilight 45
hscan 3 10
vscan 0 10[light]
name Top2
color red ambilight 46
color green ambilight 47
color blue ambilight 48
hscan 6 10
vscan 0 10[light]
name Top3
color red ambilight 49
color green ambilight 50
color blue ambilight 51
hscan 10 13
vscan 0 10[light]
name Top4
color red ambilight 52
color green ambilight 53
color blue ambilight 54
hscan 13 16
vscan 0 10[light]
name Top5
color red ambilight 55
color green ambilight 56
color blue ambilight 57
hscan 16 20
vscan 0 10[light]
name Top6
color red ambilight 58
color green ambilight 59
color blue ambilight 60
hscan 20 23
vscan 0 10[light]
name Top7
color red ambilight 61
color green ambilight 62
color blue ambilight 63
hscan 23 26
vscan 0 10[light]
name Top8
color red ambilight 64
color green ambilight 65
color blue ambilight 66
hscan 26 30
vscan 0 10[light]
name Top9
color red ambilight 67
color green ambilight 68
color blue ambilight 69
hscan 30 33
vscan 0 10[light]
name Top10
color red ambilight 70
color green ambilight 71
color blue ambilight 72
hscan 33 36
vscan 0 10[light]
name Top11
color red ambilight 73
color green ambilight 74
color blue ambilight 75
hscan 36 40
vscan 0 10[light]
name Top12
color red ambilight 76
color green ambilight 77
color blue ambilight 78
hscan 40 43
vscan 0 10[light]
name Top13
color red ambilight 79
color green ambilight 80
color blue ambilight 81
hscan 43 46
vscan 0 10[light]
name Top14
color red ambilight 82
color green ambilight 83
color blue ambilight 84
hscan 46 50
vscan 0 10[light]
name Top15
color red ambilight 85
color green ambilight 86
color blue ambilight 87
hscan 50 53
vscan 0 10[light]
name Top16
color red ambilight 88
color green ambilight 89
color blue ambilight 90
hscan 53 56
vscan 0 10[light]
name Top17
color red ambilight 91
color green ambilight 92
color blue ambilight 93
hscan 56 60
vscan 0 10[light]
name Top18
color red ambilight 94
color green ambilight 95
color blue ambilight 96
hscan 60 63
vscan 0 10[light]
name Top19
color red ambilight 97
color green ambilight 98
color blue ambilight 99
hscan 63 66
vscan 0 10[light]
name Top20
color red ambilight 100
color green ambilight 101
color blue ambilight 102
hscan 66 70
vscan 0 10[light]
name Top21
color red ambilight 103
color green ambilight 104
color blue ambilight 105
hscan 70 73
vscan 0 10[light]
name Top22
color red ambilight 106
color green ambilight 107
color blue ambilight 108
hscan 73 76
vscan 0 10[light]
name Top23
color red ambilight 109
color green ambilight 110
color blue ambilight 111
hscan 76 80
vscan 0 10[light]
name Top24
color red ambilight 112
color green ambilight 113
color blue ambilight 114
hscan 80 83
vscan 0 10[light]
name Top25
color red ambilight 115
color green ambilight 116
color blue ambilight 117
hscan 83 86
vscan 0 10[light]
name Top26
color red ambilight 118
color green ambilight 119
color blue ambilight 120
hscan 86 90
vscan 0 10[light]
name Top27
color red ambilight 121
color green ambilight 122
color blue ambilight 123
hscan 90 93
vscan 0 10[light]
name Top28
color red ambilight 124
color green ambilight 125
color blue ambilight 126
hscan 90 96
vscan 0 10[light]
name Top29
color red ambilight 127
color green ambilight 128
color blue ambilight 129
hscan 90 100
vscan 0 10[light]
name Right1
color red ambilight 130
color green ambilight 131
color blue ambilight 132
hscan 90 100
vscan 6 13[light]
name Right2
color red ambilight 133
color green ambilight 134
color blue ambilight 135
hscan 90 100
vscan 13 20[light]
name Right3
color red ambilight 136
color green ambilight 137
color blue ambilight 138
hscan 90 100
vscan 20 26[light]
name Right4
color red ambilight 139
color green ambilight 140
color blue ambilight 141
hscan 90 100
vscan 26 33[light]
name Right5
color red ambilight 142
color green ambilight 143
color blue ambilight 144
hscan 90 100
vscan 33 40[light]
name Right6
color red ambilight 145
color green ambilight 146
color blue ambilight 147
hscan 90 100
vscan 40 46[light]
name Right7
color red ambilight 148
color green ambilight 149
color blue ambilight 150
hscan 90 100
vscan 46 53[light]
name Right8
color red ambilight 151
color green ambilight 152
color blue ambilight 153
hscan 90 100
vscan 53 60[light]
name Right9
color red ambilight 154
color green ambilight 155
color blue ambilight 156
hscan 90 100
vscan 60 66[light]
name Right10
color red ambilight 157
color green ambilight 158
color blue ambilight 159
hscan 90 100
vscan 66 73[light]
name Right11
color red ambilight 160
color green ambilight 161
color blue ambilight 162
hscan 90 100
vscan 73 80[light]
name Right12
color red ambilight 163
color green ambilight 164
color blue ambilight 165
hscan 90 100
vscan 80 86[light]
name Right13
color red ambilight 166
color green ambilight 167
color blue ambilight 168
hscan 90 100
vscan 86 93[light]
name Right14
color red ambilight 169
color green ambilight 170
color blue ambilight 171
hscan 90 100
vscan 90 100[light]
name Sub1
color red ambilight 172
color green ambilight 173
color blue ambilight 174
hscan 90 96
vscan 90 100[light]
name Sub2
color red ambilight 175
color green ambilight 176
color blue ambilight 177
hscan 90 93
vscan 90 100[light]
name Sub3
color red ambilight 178
color green ambilight 179
color blue ambilight 180
hscan 86 90
vscan 90 100[light]
name Sub4
color red ambilight 181
color green ambilight 182
color blue ambilight 183
hscan 83 86
vscan 90 100[light]
name Sub5
color red ambilight 184
color green ambilight 185
color blue ambilight 186
hscan 80 83
vscan 90 100[light]
name Sub6
color red ambilight 187
color green ambilight 188
color blue ambilight 189
hscan 76 80
vscan 90 100[light]
name Sub7
color red ambilight 190
color green ambilight 191
color blue ambilight 192
hscan 73 76
vscan 90 100[light]
name Sub8
color red ambilight 193
color green ambilight 194
color blue ambilight 195
hscan 70 73
vscan 90 100[light]
name Sub9
color red ambilight 196
color green ambilight 197
color blue ambilight 198
hscan 66 70
vscan 90 100[light]
name Sub10
color red ambilight 199
color green ambilight 200
color blue ambilight 201
hscan 63 66
vscan 90 100[light]
name Sub11
color red ambilight 202
color green ambilight 203
color blue ambilight 204
hscan 60 63
vscan 90 100[light]
name Sub12
color red ambilight 205
color green ambilight 206
color blue ambilight 207
hscan 56 60
vscan 90 100[light]
name Sub13
color red ambilight 208
color green ambilight 209
color blue ambilight 210
hscan 53 56
vscan 90 100[light]
name Sub14
color red ambilight 211
color green ambilight 212
color blue ambilight 213
hscan 50 53
vscan 90 100[light]
name Sub15
color red ambilight 214
color green ambilight 215
color blue ambilight 216
hscan 46 50
vscan 90 100[light]
name Sub16
color red ambilight 217
color green ambilight 218
color blue ambilight 219
hscan 43 46
vscan 90 100[light]
name Sub17
color red ambilight 220
color green ambilight 221
color blue ambilight 222
hscan 40 43
vscan 90 100[light]
name Sub18
color red ambilight 223
color green ambilight 224
color blue ambilight 225
hscan 36 40
vscan 90 100[light]
name Sub19
color red ambilight 226
color green ambilight 227
color blue ambilight 228
hscan 33 36
vscan 90 100[light]
name Sub20
color red ambilight 229
color green ambilight 230
color blue ambilight 231
hscan 30 33
vscan 90 100[light]
name Sub21
color red ambilight 232
color green ambilight 233
color blue ambilight 234
hscan 26 30
vscan 90 100[light]
name Sub22
color red ambilight 235
color green ambilight 236
color blue ambilight 237
hscan 23 26
vscan 90 100[light]
name Sub23
color red ambilight 238
color green ambilight 239
color blue ambilight 240
hscan 20 23
vscan 90 100[light]
name Sub24
color red ambilight 241
color green ambilight 242
color blue ambilight 243
hscan 16 20
vscan 90 100[light]
name Sub25
color red ambilight 244
color green ambilight 245
color blue ambilight 246
hscan 13 16
vscan 90 100[light]
name Sub26
color red ambilight 247
color green ambilight 248
color blue ambilight 249
hscan 10 13
vscan 90 100[light]
name Sub27
color red ambilight 250
color green ambilight 251
color blue ambilight 252
hscan 6 10
vscan 90 100[light]
name Sub28
color red ambilight 253
color green ambilight 254
color blue ambilight 255
hscan 3 10
vscan 90 100[light]
name Sub29
color red ambilight 256
color green ambilight 257
color blue ambilight 258
hscan 0 10
vscan 90 100vielen dank
Gruß -
Hi,
habe den value min wieder auf 0.0 gestellt - bringt eigentlich nur mehr Probleme als Verbesserung.Allerdings habe ich festgestellt, daß wenn BL läuft und man 2 Aufnahmen laufen hat, eine davon kaputt
ist! Also 2 Aufnahmen gleichzeitig oder eine Aufnahme und Timeshift. Habe heute zwar auf OE2.0 umgestellt, war aber auch mit OE1.6 schon so. Brachte mir großer Ärger ein, da 3 Recordings der Family nicht liefen (komplett verpixelt).Stopt man die Aufnahmen und schaltet das BL ab und startet danach das Atmolight blitzen die LEDs mit ca. 6 Hz Frequenz. Es scheint so als ob der BL Grabber nicht komplett abgeschaltet wird. Schaltet man dann nochmals das BL aus, läuft das AL sauber.
Da speedyisfast bei uns im Forum nicht wirklich aktiv ist, muß ich das als ET9000 User leider hier posten. Bitte um Verständnis