Dm600pvr Enigma2 Pcd 7.0

  • Daemon manager gui has an autostart @ bootup option

  • Is the version of BarryAllen in this image the latest that can be installed. I don't want to start uninstalling n feck things up just yet!


    I ask this as I remember a few additional options in 4.8.22 and the latest version available for PPC is 5.0.17.


    Also reading an old simple howto BA I created a while ago I've stumbled across some interesting info, given the dvb-modules date I asked about before.


    I found these sources: dreambox-dvb-modules-dm600pvr-2.6.12-20090707.tar.bz2


    DM600PVR:
    KV_dm600pvr = "2.6.12"
    PV_dm600pvr = "${KV}-20090707"


    These are the drivers in the last DM image for DM600 to DL from Dream, but I'm pretty sure both cvs n openpli e1 have: PV_dm600pvr = "${KV}-200904030"


    This earlier driver caused later versions of BA for ppc to complain about secondstage loader n not install, As I will have to test in the flash image can you offer any advice before I start.


    Regards



    Hej

  • Enigma1 drivers will install in the e2 image. Please try and see what happens. I did not change because I thought that will make no difference to my viewing !


    Same applies to BA. Try a new version if you wish.


    I am struggling now because I cannot stream mp4 properly with vlc ! :D

  • Ok i'll try n break it :) n report back.


    So I can install pretty much anythin from the deploy/ipk folder?


    Is it a transcoding issue? I've had my fairshare of probs with transcoding for my godson's psp when he goes on holiday. :rolleyes:

  • thats in my tmp/work folder!


    where my compiled ipks are :)


    Edit: BA 5.0.17 seems to install over the top of existing version ok.


    Edit: dvb-modules seems to have done no damage but don't know if they will do any good.


    Edit: openvpn_2.0.2 seems to be running ok, needed updated lib, needs more testing


  • Hi,


    as promissed I want to give feedback.
    Unfortunately at the moment with "bad experiences".


    At the moment I fail to "run the CF".
    I bought a CF-IDE-adapter.
    I bought a new CF-card (30MB/s)
    I bought a mini-IDE-44pin cable (three plugs)


    But I failed to install BA. (on The CF)
    And I even failed to "see" the CF-card listed in the DreamControlCenter
    ==> So I think it isn´t a BA-problem but a proplem with thd CF or the items in between


    But I have no idea why the CF card isn´t shown in DCC.
    I tried to format in different ways:
    - FAT32 (windows, slow formating process)
    - ext2 (formated with ubuntu and with a tool under windows)
    - FAT32 (with HP USB Disk Storage Formating Tool)
    But everything without success.


    I tried "CF only" (only the CF adapted to the cable and I tried "CF and the HDD" (HDD as master and the CF as slave)


    Do I have to do something special with the image so that I can use the CF?
    What is my mistake?

    Thanks for any suggestions.

    Gruß Karate01



    Dream8000 SS - int. HDD 2TB - OoZooN
    Dream800 HD Sat - int. HDD 400GB - OoZooN
    Dream600 Sat - int. HDD 160GB - PCD 7.0


  • Hi pcd,


    I haven´t had until today.
    In the meantime I have. [ thanks for the link ! ]
    But it didn´t help (really).


    I think from the "physically side" I did everything well.
    I already tried another CF-Card and another IDE-cable.
    The HDD works fine but not the CF-Card.


    If I understand the thread right, then it is only necessary to "connect" the items and then everything should be o.k. !?


    So that´s my main question:
    - Do I have to do something special in the image that the CF-card can be used?
    - Do I have to go to a sub-menu to "activate" the CF card?
    - Do I have to edit a file?
    or
    - Should the CF-card appear automatically when the "physical connection" is all right?


    Thanks

    Gruß Karate01



    Dream8000 SS - int. HDD 2TB - OoZooN
    Dream800 HD Sat - int. HDD 400GB - OoZooN
    Dream600 Sat - int. HDD 160GB - PCD 7.0

    Edited once, last by Karate01 ().


  • :hurra:
    Ich gebe mal die Antwort selbst
    :hurra:


    Yes the CF-card appears automatically !!
    It works !!


    What did I change?
    I´ve tried again another CF-Card - an older one - 2GB and it works


    ==> So I can say the latest "SanDisk Ultra 4GB with 30MB/s" doesn´t work but the "SanDisk Extrem II 2GB" works fine :hurra:


    [ Hopefully it is fast enough so that the HDD isn´t slown down by the CF too much ] ...... we´ll see .....

    Gruß Karate01



    Dream8000 SS - int. HDD 2TB - OoZooN
    Dream800 HD Sat - int. HDD 400GB - OoZooN
    Dream600 Sat - int. HDD 160GB - PCD 7.0

    Edited 2 times, last by Karate01 ().

  • Hi all,


    I have the problem that I can not play recordings.
    The recording is saved on the hard disk properly.


    When I try to play, is a black screen.
    If I copy the recording to the PC via FTP, you can also VLC can not play the recording.


    Can someone give me a tip on how I can watch the recordings?


    Thank you.
    Temporer

  • there is only one chance




    change the image :tongue:

    mfg


    :499:
    pscem8mp




    Keiner ist so verrückt, dass er nicht einen noch Verrückteren findet der ihn versteht
    Friedrich Nietsche

  • only my personal opinion -
    the image ist not to use

    mfg


    :499:
    pscem8mp




    Keiner ist so verrückt, dass er nicht einen noch Verrückteren findet der ihn versteht
    Friedrich Nietsche

    Edited once, last by pscem8mp ().

  • i think the gemini 4.7 works stable

    mfg


    :499:
    pscem8mp




    Keiner ist so verrückt, dass er nicht einen noch Verrückteren findet der ihn versteht
    Friedrich Nietsche

  • Quote

    Originally posted by pscem8mp
    only my personal opinion -
    the image ist not to use


    Look in the Database - hundreds of people use this image (including me) !


    I have no recording/playback/timeshift problem.


    My personal opinion - you have probably not tried this image ! :)

  • Hi Temporer,


    What did you record ? From a tv channel - using red button ?


    Or recorded with vlcplayer from a web stream (webmediavlc) ?


    Where (which folder) is the recording ?


    Please give more details.


    Cheers, pcd.

    Edited once, last by pcd ().