Dm600pvr Enigma2 Pcd 7.0

  • Regarding the 4:3 Letterbox issue in a previous thread, it might sound stupid but I think the problem is related to the black bars , they should be left n right not top n bottom.


    I hope that makes sense, I think I saw the code while building but can't remember where.

  • Hello, is it possible that you implement dynamic PMT for local programs ?


    Your Images works very very well !!


    I only missing dynamic PMT, every day ~18:55-19:25 I want to watch ORF2-B (local region window). During 18:55 and 18:59 ORF send an PMT update and switch over from ORF2 to ORF2-B. Everyday I see at this switch a black screen and I must rezap to ORF2-B. I´ve been tested with different E-M-U.


    Here a log from cccam: "enigma interface: disconnected (0)"





    18:57:17.005 CCcam: found cryptoworks caid: 0xd95 ecmpid: 0xfc id: 0x0
    18:57:17.005 CCcam: found cryptoworks caid: 0xd05 ecmpid: 0xca id: 0x0
    18:57:17.005 CCcam: found irdeto caid: 0x648 ecmpid: 0x66 id: 0x0
    18:57:17.006 CCcam: found betacrypt caid: 0x1702 ecmpid: 0x12e id: 0x0
    18:57:17.006 CCcam: found nagra caid: 0x1833 ecmpid: 0x192 id: 0x0
    18:57:17.006 CCcam: found nds caid: 0x9c4 ecmpid: 0x1e2 id: 0x0
    18:57:17.006 CCcam: cam[0] set PMT for sid=32cd
    18:57:17.021 CCcam: start EMM
    18:57:17.109 CCcam: local ecm -> card /dev/sci0 0xd95(0x000) sid 0x32cd
    18:57:17.110 CCcam: local ecm <- card /dev/sci0 cw's from cache
    18:57:17.111 CCcam: cam[0] ecm odd ok caid:0xd95 id:0x0 pid:0xfc Unknown
    18:57:17.957 CCcam: local ecm -> card /dev/sci0 0xd95(0x000) sid 0x32cd
    18:57:18.224 CCcam: local ecm <- card /dev/sci0 ok
    18:57:18.225 CCcam: cam[0] ecm even ok caid:0xd95 id:0x0 pid:0xfc Unknown
    18:57:25.684 CCcam: EMM demux 1 set
    18:57:25.685 CCcam: EMM: not interested in 0D05:000000
    18:57:25.686 CCcam: EMM: start filter on irdeto emmpid: 0x258 caid: 0x648 id: 0x0
    18:57:25.686 CCcam: EMM: start filter on cryptoworks emmpid: 0x2bd caid: 0xd95 id: 0x0
    18:57:25.687 CCcam: EMM: not interested in 09C4:000000
    18:57:25.687 CCcam: EMM: not interested in 1833:000000
    18:57:25.688 CCcam: EMM: start filter on betacrypt emmpid: 0x263 caid: 0x1702 id: 0x0
    18:57:28.107 CCcam: local ecm -> card /dev/sci0 0xd95(0x000) sid 0x32cd
    18:57:28.371 CCcam: local ecm <- card /dev/sci0 ok
    18:57:28.372 CCcam: cam[0] ecm odd ok caid:0xd95 id:0x0 pid:0xfc Unknown
    18:57:37.953 CCcam: local ecm -> card /dev/sci0 0xd95(0x000) sid 0x32cd
    18:57:38.218 CCcam: local ecm <- card /dev/sci0 ok
    18:57:38.218 CCcam: cam[0] ecm even ok caid:0xd95 id:0x0 pid:0xfc Unknown
    18:57:47.096 CCcam: enigma interface: disconnected (0)
    18:57:47.667 CCcam: found cryptoworks caid: 0xd05 ecmpid: 0xc9 id: 0x0
    18:57:47.667 CCcam: found cryptoworks caid: 0xd95 ecmpid: 0xfb id: 0x0
    18:57:47.668 CCcam: found irdeto caid: 0x648 ecmpid: 0x65 id: 0x0
    18:57:47.668 CCcam: found betacrypt caid: 0x1702 ecmpid: 0x12d id: 0x0
    18:57:47.668 CCcam: found nagra caid: 0x1833 ecmpid: 0x191 id: 0x0
    18:57:47.668 CCcam: found nds caid: 0x9c4 ecmpid: 0x1e1 id: 0x0



    Thanks a lot !
    Tom

  • I use the webinterface supplied with the image.


    Follow the instructions in Post 1.


    I find that vlc 0.86 works best. What is your experience ?

  • I really don't want to have to use the older vlc, so I'm trying to understand what going on with the latest vlc. It's so close to working, vlc only decodes the first 5 blocks which gives you a screenshot then continues to get the stream but not decode.


    I found this info:
    the stream mode require to access to localhost of dreambox
    Edit : (extensions => Web Interfaces => Interfaces) :
    Address, Port, Authorization
    127.0.0.1, 80, no
    0.0.0.0, 8080, yes


    But I can't find interfaces, can't find webif config file, changes I made in gui I expected to be in e2-settings but they wern't?


    Also if you change the http webif port with authorisation set to yes is ignored! (It Don't ask for password)


    I think the info is sound but can't action it.

  • For me, the streaming works with VLC 1.1.7 but not on all channels.
    If I remember correctly, Sky UK channels didn't work - the symptoms were the same as yours.
    But on other packages it works OK.

  • Thanks thats useful to know. shame I don't have acess to other packages for testing @ the mo.


    I'm using latest v1.1.11 n the e1 openpli image streams perfect so I know it's possible, if there's something I want to stream I just boot it through BA as a workaround but it would be nice to not have to. :)

  • You can use openpli e1 within pcd's e2 image instead of CVS e1.
    That way, openpli e1 will be just one restart enigma away. :)
    I use it that way on my 500plus.

  • Shite now that's really interesting, I've built a basic PCD E2 in the openpli enviroment and deleted the openpli enigma :face_with_rolling_eyes:


    I need to understand the boot process n scripts a little better I think :)


    Thanks again

  • Some more info re streaming - if you do not know yet (!) :-


    The streaming ports are given in /etc/inetd.conf. The ppc boxes stream via port 31339. The mips boxes (e2 generally) streams via port 8001 using streamproxy. I tried to patch streamproxy - but did not work. Did not have time !


    Intead I patched webinterface/web/stream.m3u.xml to get the pids with port 31339 to get the same url as in e1.


    It is very interesting you made a e2 image with openpli. Presumably with openpli-1 ?


    Carry on with streaming issues !


    I can (for example) stream Redtube to a mips box using gstreamer. But somehow vlc cannot stream the videos to the 600. Shame !


    Cheers, pcd.

    2 Mal editiert, zuletzt von pcd ()

  • Zitat

    I've built a basic PCD E2 in the openpli enviroment and deleted the openpli enigma


    You don't need to have the entire openpli e1 build.
    Just use openpli e1 binary and replace the CVS one.
    After that you will have to replace some libs because openpli e1 uses some newer ones.
    Start e1 manually and it will complain about the libs which you will need to replace.
    I once compiled openpli e1 for 600pvr with timezone window patch so you can search my posts and find it.

  • I'm still stumbling around but, yes I did find inetd.conf, seen the 8001, Played around with the different streams on all the ports without much sucess, seen the patch files but not looked closer yet.


    I feel the 600 may be resetting the stream, again you know me n my assumptions :) It's like it takes a screen shot n then streams.


    I have made ref to openpli build in other thread, didn't want to go to far off topic in this thread, I wanted to try it to see if I had understood all your teachings and thought it would be a good exercise :) It's only as per your CVS files at the mo but I've learn't more and I now have 2 VM's one for each enviroment.


    If there is anything you feel I might be able to help you with re testing please don't hesitate to ask, I'd be only to willing to give a little back.

  • Zitat

    You don't need to have the entire openpli e1 build.
    Just use openpli e1 binary and replace the CVS one.
    After that you will have to replace some libs because openpli e1 uses some newer ones.
    Start e1 manually and it will complain about the libs which you will need to replace.
    I once compiled openpli e1 for 600pvr with timezone window patch so you can search my posts and find it.


    Thats the thing with my e2 openpli build openpli e1 was working fine as all libs were compiled in :)


    I deleted it so I could load e2 via telnet, I'm a real novice m8!!!


    I will look @ your posts, but at the mo I'm having a hard enough job keeping track of all the things buzzing round my head re creating a basic working image.

  • Hi kalehrl and Hejira,


    Re vlc :


    Please replace Adult.py in plugin WebmediaVlc with the attached. You will find Redtube in the adult channel.


    Playback of videos is ok for pictures - but no sound. With audio samplerate 44100 in Vlcplayer config - sound ok - but the picture breaks up. Perhaps you can try to get both in sync.


    I tested with vlc 1.1.4.


    Cheers, pcd.

  • Ok, I had to install the plugins first, Great Plugins by the Way :)


    what I've done is download the flv from red then converted in vlc then tried to play the converted file on pc n dm with vlc I've not had sucess as yet but I just wanted to check my method was sound?

  • Yes, as you say, picture is OK but no sound on redtube and all entries are doubled.
    Could you please check youporn because videos can no longer play?
    They are listed but nothing happens when you press OK.

  • I think I've tried most standard combinations without any joy :frowning_face: If I get sound I get picture breakup. I wonder if there is a bit rate combination sweet spot but I can't find it @ the mo.


    The Picture's perfect Just put some cheesy 70's porn muisc on your stereo it'll be fine lol


  • Can you please tell us what to change on the scripts to automatically been started after reboot ?
    I am also facing the problem that the script can be started by DOS prompt but not automatically after reboot because it expects $1 start or stop.
    thanks