LCD4linux-Plugin - WLAN-Web / Android / Pearl / Samsung - LCD-Display an der Dream [18.08.2022]
-
-
What box? Not every box has a CPU temperature. CVS, what is it? That is very very very very very very very old.
-
my box is DM-900
in merlin it's OKi mean unstable DP Image
(dreambox-image-deb-dm900-20181127.tar.xz) -
the temperature comes from "/sys/class/thermal/thermal_zone0/temp".
Can you compare, best in the shell with "cat" . You can also turn on logging and look for errors. ("Error read Temp") -
thanks for your reply
cat ..... shows temperatureroot@dm900:~# cat /sys/class/thermal/thermal_zone0/temp && uptime
70601
23:05:51 up 5:35, 2 users, load average: 0.05, 0.03, 0.05 -
Are you sure the LCD shows the CPU temperature? This always has a decimal point even at "0" (> "0.0°C"). It looks more like weather element.
You have activated : information - sensors = "C" ? -
of course it's correct
as i said in merlin all the things work perfecthere is a screenshot from merlin
-
-
Please download "enigma2-plugin-extensions-lcd4linux_5.0- r4_armhf.deb" from the first page und try again.
-
Yes, the temperature display for DM9xx has only existed since V5.0r2 .
-
thanks
the problem is why i can't see 5.0-r4 with unstable image and BP
with merlin (BP Installed) i can see 5.0-r4
-
Hallo,
mal eine Frage, ich nutze im "Idle" auf einem Bildschirm "Nächste Aufnahme".
Ich lasse mir 10 Positionen anzeigen. In dem Changelog für 5.0 habe ich gelesen, dass in der Timerliste die aktiven in "ROT" gekennzeichnet werden.
Bei mir sind aber alle 10 Timer in weiss, auch wenn gerade welche aktiv sind. Was muss ich denn hier noch für Einstellungen vornehmen?
Ich habe hier leider nichts gefunden.VG
RobertEDIT:
hat sich erstmal erledigt, habe gerade erst ein Update über den Feed bekommen. Vorher war hier auf dem Feed noch die 4.9x hinterlegt und somit bei mir auch installiert. -
hmm, da gibt es nix einzustellen. Bei mir auf der 920 geht es jedenfalls .
Zeige mal die Ausgabe während einer Aufnahme von:
http://ip.der.box/web/timerlist
Edit: OK , dann eben nicht -
Danke ... es funktioniert nun auch bei mir, ohne was einzustellen.
Der "Fehler" war, daß ich aufgrund der Feed-Version noch auf 4.9x hing. -
Seit huute funktioniert WeatherUnlocked nicht mehr. Kann das jemand bestätigen?
-
ja, kommt ein "Service Unavailable" zurück. Gibt man einen falschen Key an, dann kommt ein entsprechender Fehler, also vom Prinzip gehts wohl, aber Daten können nicht abgerufen werden. Hoffen wir mal nur auf ein temporäres Problem.
-
kann man das nordwest so hinbekommen das es ganz da steht.
danke -
da wir nicht mal 60km auseinander wohnen, kann ich das Nordwest natürlich auch so sehen. Allerdings gibt es keine direkte Möglichkeit das einzupassen.
Man kann eine schmalere Schriftart wählen, dann passt das. Allerdings wirkt das dann auch auf die Schrift der Temperaturwerte. -
ok dann muss ich da mit leben
danke -
WeatherUnlocked funzt hier seit heute Mittag wieder.