O.k…dann wenden wir mal meine Frage auf einen anderen SPF an…Muss ja nicht der sein
LCD4linux-Plugin - WLAN-Web / Android / Pearl / Samsung - LCD-Display an der Dream [18.08.2022]
-
-
hallo kann mir jemand helfen, wie sollte die skalierung der lcd-bildschirmgröße auf meinem dm920 sein? ich habe viele einstellungen ausprobiert, ich konnte es nicht im vollbildmodus machen
-
entsprechend Post 1 ist bei "Box-Skin-LCD" eine Auflösung von 400x240 einzustellen.
Wichtig ist, wenn Änderungen hier gemacht werden, MUSS man alle aktivieren 3 Häkchen deaktivieren, "setze...", wieder aktivieren, "setze...", "speichern", GUI-Neustart ausführen.
-
entsprechend Post 1 ist bei "Box-Skin-LCD" eine Auflösung von 400x240 einzustellen.
Wichtig ist, wenn Änderungen hier gemacht werden, MUSS man alle aktivieren 3 Häkchen deaktivieren, "setze...", wieder aktivieren, "setze...", "speichern", GUI-Neustart ausführen.
Danke für die Antwort, wie gesagt, ich habe die Einstellungen als 400x240 gewählt, der LCD-Bildschirm sieht leer aus.
-
und als "LCD 1 Typ" hast du "internes Box-Skin-LCD" eingestellt?
-
und als "LCD 1 Typ" hast du "internes Box-Skin-LCD" eingestellt?
Danke, ich habe es so eingestellt wie du gesagt hast, jetzt ist es fertig 🤗
-
-
Not here. The versions above r7 are customizations (Python3) which were done within the open images. The original and OpenATV versions are no longer the same.
-
Thank you so much!!!
-
Hallo Jörg,
ich habe seit Langem noch mal eine kleine Einstellung bei LCD4Linux vornehmen müssen und dabei festgestellt, dass Du wohl schon länger einen Support für Yamaha MusicCast drinne hast.
MusicCast nutze ich nur in meinen Nebenräumen... aaaaaaaaber ein Support für Volumio [Volumio - The Audiophile Music Player] wäre der Knaller !!
Volumio läuft bei mir auf einem Raspberry, um damit TIDAL zu streamen was mein Netzwerkstreamer nicht beherrscht.
Und diese Daten auf den 2 Pearl Displays wäre ein Traum...
Evt. kannst du da etwas zaubern ??MfG Sprudelverduenner
-
Hallo zusammen,
ich habe mir bei AliExpress ein Display für meine One zum testen bestellt, dieses kam gestern an. Angeschlossen lief sofort mit der Einstellung Pearl (oder kompatibles LCD) 320x240. Leider hat das Display eine höhere Auflösung (480x320) so das LCD4Linux leider nur einen Teil des Displays ausfüllt. Gibt es eine möglichkeit diese Auflösung hinzuzufügen oder eine benutzerdefinierte Display größe zur Auswahl zu bringen?
vielen Dank für eine Antwort
Gruß
Christoph
-
Ab Besten ist es, in der plugin.py das Display hinzuzufügen. Wenn du dir das zutraust, dann versuche mal zu ändern (ungetestet). Sichere dir die originale plugin.py falls was schief läuft.
von
CodeLCDType = [("11", _("Pearl (or compatible LCD) 320x240")), ("12", _("Pearl (or compatible LCD) 240x320")), ("121", _("Corby@Pearl 128x128")),
auf
CodeLCDType = [("11", _("Pearl (or compatible LCD) 320x240")), ("12", _("Pearl (or compatible LCD) 240x320")), ("121", _("Corby@Pearl 128x128")), ("122", _("Pearl (or compatible LCD) 480x320")),
einfügen nach
auf
Alternativ wählst du einfach das normale Pearl 320x240 und trägst anstelle "320, 240" hier "480, 320" ein
PS: Es ist für Andere durchaus interessant, wie das LCD auf Ali heißt, zum Suchen. (Link ist ja nicht erlaubt)
-
Hallo Jörg,
vielen dank für deinen Schnellen Support, es funktioniert.
Könntest du den Typen mit in deinen Quellcode aufnehmen?
Falls jemand Intresse hat das hier ist das Display incl. Versand habe ich 21€ bezahlt
Gruß
Christoph
-
Does this plugin work in Dreambox 2?
I could not launch it
-
Does this plugin work in Dreambox 2?
I could not launch it
Of course the os based on OE2.6, it’s a extension! It will be launched with the start of enigma.
Check in Webbrowser <boxip>/lcd4linux
-
Of course the os based on OE2.6, it’s a extension! It will be launched with the start of enigma.
Check in Webbrowser <boxip>/lcd4linux
The web browser of this plugin has no problem, but the settings of this plugin do not apply to the device panel
-
Do you mean the Dreambox TWO? Internal displays work as "Box-Skin-LCD Display". For this the appropriate setting/resolution must be made in the box-skin settings. In addition, the corresponding "Enable checkboxes" must be switched on. Save the changes and do a GUI restart.
PS: If you don't want to use LCD4linux anymore, you have to uncheck these boxes before uninstalling.
-
Do you mean the Dreambox TWO? Internal displays work as "Box-Skin-LCD Display". For this the appropriate setting/resolution must be made in the box-skin settings. In addition, the corresponding "Enable checkboxes" must be switched on. Save the changes and do a GUI restart.
PS: If you don't want to use LCD4linux anymore, you have to uncheck these boxes before uninstalling.
Yes, but this plugin is not enabled in Dreambox two. What is the appropriate resolution for it?
-
LCD4linux is not used on any box by default and originally only for external LCDs. Only a few users need the skin LCD usage.
I do not know the resolution of the TWO.
-
But I have to use it because I do not have access to external Lcds.
I think I set the resolution of two correctly but this plugin does not replace the main screen layout. Can anyone help me?