Nach Softwareupdate fährt Image nicht hoch

Mir ist es genauso gegangen.
Habe heute ebenfalls auf meiner DB800 die Aktualisierung durchgeführt. Nach dem Reboot hat die Box ebenfalls nur mehr rot geblinkt, das display war schwarz.
Flash war nicht voll, habe ein bootlog gezogen, vielleicht hilft's ja jemanden.

Ich habe meine Box mit dem letzten CVS erneut geflasht. Nun läuft sie wieder. Die Konfigurationsfile habe ich vorher über telnet gesichert, da ich leider auch keine Sicherung vor dem Updaten gemacht hatte..:(

Ich kann nur jeden DB800-Besitzer empfehlen, VOR dem Update eine Sicherung zu machen, bzw. sich das Update gut überlegen...

Hier nun das Bootlog:
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.01(0x133/high) {BO23456}

2ND STAGE OK, build #76 (20100419)

0.000 - BCM board setup
0.002 - fp init
0.003 - ca init
0.727 - load config
0.755 - config loaded.
* press [S] to enter setup
OLED found!
BOOT #76(20100419)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
bootlogo size: 200861
using 1280x720p (60.00 Hz)
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
lard.org>
parsing JPEG header..
JPEG Size: 1280x720
/flash/vmlinux.gz
<5>Linux version 2.6.18-7.4-dm800 (linux@linux) (gcc version 4.4.3 (GCC) ) #1 Mo
n Dec 13 19:30:51 CET 2010
Fetching vars from bootloader... none present, using defaults.
board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
1 831ffed8 8303c848
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
CPU revision is: 00020000
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 148
User-defined physical RAM map:
node [00000000, 09400000: RAM]
node [09400000, 06c00000: RSVD]
<5>Reserving 108 MB upper memory starting at 09400000
<7>On node 0 totalpages: 65536
<7> DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists. Total pages: 65536
<5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
before init RAC 0x02a00000 0x00000000
after init RAC 0x02a0000f 0x0fff0000

Davon ist leider im WIKI nichts gestanden. Dort hatte ich nämlich nachgesehen, wie ein Bootlog erstellt werden soll.

Schade.

Ich wollte nur aufzeigen, dass wir nun schon 2 sind, die beim Updaten mit der DB800 genau das gleiche Problem haben.

Könnte es ein Problem mit dem Kernel und dem Second Stage Loader sein?
2ND STAGE OK, build #76 (20100419)

lg wunderwuzzi1

ich bin nicht allein

Mein "DM800 Cable" hing sich nach einem Update auf.
Habe iCVS neu geflasht und die Box fuhr wieder hoch
Dann im Menü "Erweiterung" das Gemini3-Update+Plugins installiert und die Box fährt wieder nicht hoch.
Also per Telnet ipkg update und ipkg upgrade gemacht. reboot.
Und die Box hängt immer noch :-s

was nun tun?

root@dm800:/# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 60.0M 44.1M 15.9M 74% /
udev 2.0M 316.0K 1.7M 15% /dev
/dev/mtdblock2 3.8M 2.4M 1.4M 63% /boot
tmpfs 71.1M 2.7M 68.4M 4% /var
tmpfs 71.1M 4.0K 71.1M 0% /tmp
/dev/sda1 979.0M 39.1M 939.9M 4% /media/hdd

root@dm800:~# init 4
root@dm800:~# enigma2
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
SetMode : wanted: 720x576x32, got 720x576x32
- double buffering available!
13144kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
lcd buffer 0x6adf20 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is not a keyboard.
Input device "dreambox advanced remote control (native)" is not a keyboard.
Input device "dreambox ir keyboard" is a keyboard.
Input device "dreambox ir mouse" is not a keyboard.
Input device "dreambox front panel" is not a keyboard.
Found 5 input devices!
+ (21) Console RC Driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 537 services
scanning for frontends..
opening frontend 0
detected cable frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 4 demux, boxtype 1
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
root@dm800:~# init 4
root@dm800:~# enigma2
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) GFBDC
16384k video mem
SetMode : wanted: 720x576x32, got 720x576x32
- double buffering available!
13144kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
lcd buffer 0x6adf20 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "dreambox remote control (native)" is not a keyboard.
Input device "dreambox advanced remote control (native)" is not a keyboard.
Input device "dreambox ir keyboard" is a keyboard.
Input device "dreambox ir mouse" is not a keyboard.
Input device "dreambox front panel" is not a keyboard.
Found 5 input devices!
+ (21) Console RC Driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 537 services
scanning for frontends..
opening frontend 0
detected cable frontend
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 4 demux, boxtype 1
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 10, in <module>
profile("PYTHON_START";)
File "/usr/lib/enigma2/python/Tools/Profile.py", line 38, in profile
perc = t * (PERCENTAGE_END - PERCENTAGE_START) / total_time + PERCENTAGE_STA
RT
ZeroDivisionError: float division
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- saving lame channel db
saved 41 channels and 537 services!
release cached channel (timer timeout)
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
clear instance
- (35) CI Slots
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (1) Background File Eraser
reached rl -1
root@dm800:~#

Bei mir das gleiche Problem!
Ich habe das Upgrade bei Addons ausgeführt und habe auch andere Skins ausprobiert.

Mein gesichertes Image kann ich aufspielen und das läuft auch.
Beim Versuch Alles neu zu machen und ich dann ein ICVS Image flashe, fährt die Box hoch.
Nachdem ich das Gemini Plugin ausführe, fährt die Dreambox 800 nicht mehr hoch. (Display bleibt schwarz, roter Punkt blinkt.)
Wenn ich bei meinem gesicherten Image ein anderes Skin einstelle, fährt die Box auch nicht mehr hoch bzw. nach dem 2. Versuch kommt Tuner fehlgeschlagen und die Zahnräder drehen sich so bleibt es dann???

Bin anscheinend nicht der einzige, heute Update gemacht, nur noch rote blinkende LED.
Ist natürlich scheisse ne!

Shit, gleiches hier!
Habe Update bei meinem Vater gemacht, der bringt mich um, heute Bayern gegen Dortmund....

NAch Updare nicht wieder hochgekommen, dann abgewürgt, danach fuhr alles hoch und es kam die Meldung von wegen neue Festplatte.

AAAaaaber nun sind alle Sender dunkel?!
Hat jemand eine Idee?

Hallo,
bei mir auch das gleiche.
Habe aber vorher update gemacht, nützt aber nichts da nach dem zurück sichern das gleiche Problem wieder auftritt.
Einmal ist die Box hoch gefahren und hat dann keinen Tuner gefunden.
LG kaskaden789

Zwei Neustarts und dann lief die Box wieder.