usbTuner (multiple tuners on dm800) v0.7.3 ipk package (all new images) + GUI plugin

  • Pattyren
    There are already iCVS feed where the module-init-tools is:

    Code
    http://download.blue-panel.com/icvs/dm800/opendreambox/1.6/feed/06092011/mipsel/module-init-tools_3.4-r5_mipsel.ipk

    Check your feed config file: /etc/opkg/mipsel-feed.conf
    I have download.blue-panel.com/icvs/dm800/opendreambox/1.6/feed/06092011/mipsel inside it.


    skirmas
    I know that newest kernel has slightly different modules and thus you cannot use older modules from usbtuner_0.4.3b_800.ipk anymore :(.


    PS: If you really need support for tda18218 you can use OpenPLI or SIFTeam image which are not the CVS images. The situation is bad, not every patch is accepted by DMM image (and/or CVS) developers.


    I have extracted modules from usbtuner_0.4.3b_800.
    Here you are, you can try:

  • i did make it work


    but same thing with emu only FTA channels
    when ubtuner disabled emu works and when usb enabled it doesnt
    same thing as is with ItalysatDTT

  • Do the modules from Usb043bAf9015Modules.tar.gz really work? Maybe you don't have the newest experimental image.
    It is posible that the /usr/bin/usbtuner binary makes the problem. I have experimented with the extuner which is replacement of the usbutner. I have less problems with it.
    I have simple renamed extuner to usbtuner :).


    You can try too:

    Files

    • extuner.zip

      (5.64 kB, downloaded 94 times, last: )

    Edited 4 times, last by helour ().

  • i used first sifteam and then overwrite with drivers from DMM experimental feed and it works , tomorrow i will try on clean image Yours Usb043bAf9015Modules.tar.gz
    my experimental is up to date, i did update today


    i will try with extuner, where it goes, which directory

  • Quote

    Originally posted by skirmas
    where it goes, which directory


    Read better my previous post :)


    /usr/bin/usbtuner

  • Quote

    Originally posted by skirmas
    ...but same thing with emu only FTA channels
    when ubtuner disabled emu works and when usb enabled it doesnt
    same thing as is with ItalysatDTT


    I have such strange problem too (sometimes), especially after the box restart but on the iCVS image.
    Try switch off your box, unplug it and after a while switch on it again. If it doesn't help try this procedure once more time.
    I absolutely don't understand why but it works on my box.
    I have thought that it doesn't have connection with the usbtuner. But I may be wrong.


    05.11.2011:
    I didn't found such solution for the latest DMM image. :( I'm waiting for the new iCVS image then I will see.


  • Sorry guys. It was big mistake. Mea culpa.


    I forgot run depmod -a before testing SIFTeam and other modules.


    Of course all posted modules work well on my iCVS image.


    PS: I have added the command depmod -a (for sure) into my version of usbtuner.sh script (start section)

  • Same probleme here... (Tuner Cinergy T RC):


    root@dm800:/# /etc/init.d/usbtuner.sh
    /etc/init.d/usbtuner.sh [start|stop|restart]
    root@dm800:/# /etc/init.d/usbtuner.sh start
    Loading module: dvb-usb-af9015...Failed!
    /dev/dvb/adapter1 not created by loading the driver. Please check dmesg for reas
    ons


    Any ideas?

  • Please attach the file with dmesg output right after you run command usbtuner.sh start.
    Look at skirmas posts :).

  • Ok. Here's the full dmsg output.


    Thanks in advance



    Edit: Maybe this is more interesting...


    [4294699.578000] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
    [4294699.578000] usbcore: registered new driver pl2303
    [4294699.578000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
    [4294717.260000] usbcore: registered new driver dvb_usb_af9005
    [4294717.580000] usbcore: registered new driver dvb_usb_af9015
    [4294717.693000] usbcore: registered new driver dvb_usb_af9035
    [4294717.805000] usbcore: registered new driver cinergyT2
    [4294717.916000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_set_config
    [4294717.917000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_get_tuner_i2c_master
    [4294717.917000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_control
    [4294717.919000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_parse
    [4294717.927000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_pid_filter_ctrl
    [4294717.928000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_i2c_algo
    [4294717.929000] dvb_usb_nova_t_usb2: Unknown symbol dibusb2_0_streaming_ctrl
    [4294717.930000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_dib3000mc_tuner_attach
    [4294717.931000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_dib3000mc_frontend_attach
    [4294717.932000] dvb_usb_nova_t_usb2: Unknown symbol dibusb2_0_power_ctrl
    [4294717.934000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_pid_filter
    [4294717.936000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_read_eeprom_byte
    [4294717.944000] 2150 ms: 45 Starting /etc/rcS.d/S85dvbusb...
    [ 17.018000] usbcore: deregistering driver dvb_usb_af9015
    [ 19.236000] usbcore: registered new driver dvb_usb_af9015
    [ 2032.398000] usbcore: deregistering driver dvb_usb_af9015
    [ 2034.601000] usbcore: registered new driver dvb_usb_af9015

    Files

    • dsmeg.txt

      (15.28 kB, downloaded 10 times, last: )

    Edited 2 times, last by tommy1987 ().

  • Quote

    Original von helour
    Please paste here also lsusb output.


    Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    Bus 001 Device 002: ID 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII


    Quote

    Original von helour...and exact name of your USB dvb-t device.


    How can I see it? :D


    Quote

    Original von helourIs it this one: http://www.terratec.net/en/pro…_T_Stick_RC_HD_97878.html ?


    No, it is http://www.terratec.net/en/pro…rgy_T_Stick_RC_97818.html

  • Your device need tda18218 module, but the next part of your dmesg output doesn't make sense:


    [4294717.916000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_set_config
    [4294717.917000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_get_tuner_i2c_master
    [4294717.917000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_control
    [4294717.919000] dvb_usb_dibusb_common: Unknown symbol dib3000mc_pid_parse
    [4294717.927000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_pid_filter_ctrl
    [4294717.928000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_i2c_algo
    [4294717.929000] dvb_usb_nova_t_usb2: Unknown symbol dibusb2_0_streaming_ctrl
    [4294717.930000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_dib3000mc_tuner_attach
    [4294717.931000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_dib3000mc_frontend_attach
    [4294717.932000] dvb_usb_nova_t_usb2: Unknown symbol dibusb2_0_power_ctrl
    [4294717.934000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_pid_filter
    [4294717.936000] dvb_usb_nova_t_usb2: Unknown symbol dibusb_read_eeprom_byte


    Did you install tda18218 module? Try: ipkg list-installed|grep tda18218


    PS: Which image do you have?

  • tda18218 module is not installed. If I do "opkg install tda18218" I get the message "Cannot find packe tda18218" ?(


    I use image "Newnigma2 v3.3"

  • Okay, done... but after reboot the same problem.


    Loading module: dvd-usb-af9015...Failed!