IPCamViewer for Enigma2

Doensen · Dec 30th 2011

Hey vielen Dank, aber habe es in der zwischenzeit gefixt

Nur leider geht die P/T/Z noch nicht aber werde dran bleiben.....

clancger · Jan 5th 2012

Hi Schumifan,

I've been using the IPCamViewer in my VU+Duo with VIX Image for about a year now, but have now upgraded to their new Linux 3.1.1 kernel, and installing the plugin is causing my box to crash.
Could you pls let me know if you're developing in this direction or if I will need to go back to the older SW version to continue using the viewer?

Either way, many thanks for the use that I've had so far.

Clancger

shumifan50 · Jan 5th 2012

I have just discovered the same problem with OpenPli 2. It seems there were some lurking bugs, notably bad assignments that were not picked up by the previous version of Python. I will be fixing this when I have some time as it nolonger works on my own DM500HD.

shumifan50 · Jan 5th 2012

As a side note: My experience with Ubuntu 11.10 (3.1 kernel) has not been great. It causes all sorts of glitches on my USB card reader and I have reverted back to Ubuntu 10.10. So even when I fix the fault, you might still have problems.

clancger · Jan 5th 2012

Cool thanks, looking forward to it

guess · Jan 7th 2012

shumifan50 thanks a lot for the great plugin! I'm using your plugin successfully with video server Vivotek and 500 HD.

Now I would like to activate your plugin autamaticaly whenever the door rings to show the PIP of the door cam on tv. Therefore I installad another plugin fritzcall. I changed the code of plugin.py of fritzcall to identify a call of my door station. That already works.

BUT: How can I successfully start your plugin within fritzcall?

if fileExists("/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.pyo"):
from Plugins.Extensions.IPCamViewer.plugin import *
# ??? ... ???

Unfortunaly there is no source code available of your plugin :(, is it?

Do you have some hints for me?

Best regards

guess

x-ray · Jan 7th 2012

Quote

Original von guess
shumifan50 thanks a lot for the great plugin! I'm using your plugin successfully with video server Vivotek and 500 HD.

Now I would like to activate your plugin autamaticaly whenever the door rings to show the PIP of the door cam on tv. Therefore I installad another plugin fritzcall. I changed the code of plugin.py of fritzcall to identify a call of my door station. That already works.

BUT: How can I successfully start your plugin within fritzcall?

if fileExists("/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.pyo"):
from Plugins.Extensions.IPCamViewer.plugin import *
# ??? ... ???

Unfortunaly there is no source code available of your plugin :(, is it?

Do you have some hints for me?

Best regards

guess

Display More

Yes ! I'm interested to ! Nice Idea !
How can i start this Plugin via telnet ??

regards,
andre

wesseli · Jan 8th 2012

Hallo,

ich benötige Eure Hilfe. Die folgenden Pakete habe ich installiert

IPCamViewer_2.0.0_all.ipk
camEmulator_1.0.0_mipsel.ipk
und die plugins aus der neuesten plugin.zip

und nutze folgende Konfigurationsdaten

{command}{foscam.snapshot}{/snapshot.cgi}
{command}{foscam.protocol}{http://}
{camera}{192.168.2.17:82}{foscam}{Wz}{XXX}{XXXXX}

Wenn ich nun den IPViewer über die Erweiterungen öffnen will, bekomme ich einen grünen Bildschirm mit folgenden Log.

Code

recording Directory=/media/hdd/IPCamViewer
Screen <class 'Plugins.Extensions.IPCamViewer.plugin.ViewCamImage'>((), {}): <type 'exceptions.AttributeError'>
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 246, in create
    return screen(self, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 276, in __init__
AttributeError: 'ViewCamImage' object has no attribute 'scrPosX'
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
    res = self.actions[action]()
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 56, in save
    self.run()
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 60, in run
    plugin(session=self.session)
  File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 1234, in main
  File "/usr/lib/enigma2/python/mytest.py", line 320, in open
    dlg.isTmp = True
AttributeError: 'NoneType' object has no attribute 'isTmp'
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x1af6f80>>,('WizardActions', 'ok')) failed)
]]>
		</enigma2crashlog>
		<pythonMD5sum>

Display More

So wie ich die Ausschriften deuten kann, handelt es sich um fehlende Attribute???? Aber hier weiss ich nicht weiter.

Könntet Ihr mir einen Hinweis geben? Ich habe schon mehrmals die Plugins installiert/deinstalliert u. die Konfigs geändert. Wäre sehr dankbar.

Viele Grüße

shumifan50 · Jan 9th 2012

wesseli:
Your problem is the same as clacger. I am working on it. I have found the fault. but have only managed to fix it partially.

guess:
The plugin relies heavily on enigma2 running. I have not used fritzcall, so I don't know if it will be possible to integrate IPCamViewer into it. I had a quick look for documentation on fritzcall. but found only German stuff that looked like it might be helpfull; unfortunately I can't understand German. If you point me at some documentation, then I can have a look at providing the information you need.

If anybody can tell me how to release the focus (give the remote back to enigma) while my plugin is running, then I can provie a nice solution to this problem. Unfortunately, at the moment the remote is only read by the plugin and I cannot work out how to release it.

wesseli · Jan 9th 2012

shumifan50

I think the following error is the problem. Could it be that the scrPosX is missing.

Code

AttributeError: 'ViewCamImage' object has no attribute 'scrPosX'

Could you tell me where I can find the settings? Where have you saved the data? I would like to check the entries.

Kind regards,
wesseli

shumifan50 · Jan 9th 2012

Settings are in the standard enigma2 place: /etc/enigma2/settings

The problem is a whole lot more complex than just a missing variable

seren2 · Jan 10th 2012

hi
i have a mobotix t24 camera , someone here have the config for this cam , tried with several combination and no luck.
please need help

thx

shumifan50 · Jan 10th 2012

seren2:
Read the thread. Read the manual.
Make it work from a browser first then try to make it work from IPCamViewer.

fab · Jan 21st 2012

Hi Schumifan50,

i have a Wansview NC540/W IPCam. Can you tell me whether the camera works with the IPCamViewer?
I have the Image iCVS-Image-dm800se-20111121190630.nfi from this Board.

totti1171 · Jan 21st 2012

Sollte eigentlich funktionieren, denn auch diese Kamera ist ja "nur" eine von vielen
Baugleichen Modellen....

fab · Jan 21st 2012

Gut. Kannst du mir vielleicht noch sagen zwecks der Config:

Wenn ich die über meinem Browser laufen lasse und mir die Frames anschaue sehe ich einmal:
http://192.168.XXX.XXX/live.htm
und einmal
http://192.168.XXX.XXX/videostream.cgi?rate=0
welche ist nun für mich wichtig?

totti1171 · Jan 21st 2012

finde mal raus, welcher Stream das jpg liefert!

hier mein Beispiel:
{command}{foscam.snapshot}{/snapshot.cgi?user=xxx&pwd=xxx}
{command}{foscam.protocol}{http://}
{camera}{192.168.178.27:80}{foscam}{Feldweg}{xxx}{xxx}
{command}{instar2.snapshot}{/snapshot.cgi?user=xxx&pwd=xxx}
{command}{instar2.protocol}{http://}
{camera}{192.168.178.37:80}{instar2}{carport2}{xxx}{xxx}
{command}{ycam.snapshot}{/snapshot.jpg?}
{command}{ycam.protocol}{http://}
{camera}{192.168.178.49:80}{ycam}{carport}{xxx}{xxx}

fab · Jan 21st 2012

In der Frame Info zeigt er mir das.

Adresse: http://192.168.XXX.XXX/videostream.cgi?rate=0
TYP: JPEG-Grafik
Größe: Unbekannt (nicht gecacht)
Maße: 640px × 480px

Ist dass das richtige?

fab · Jan 21st 2012

Hab es gerade getestet. Wenn ich nun IPCamViewer starte kommen die Zahnräder und nichts geht mehr

Meine Config sieht nun so aus:
{command}{wansview.up}{/decoder_control.cgi?command=0&onestep=1}
{command}{wansview.down}{/decoder_control.cgi?command=2&onestep=1}
{command}{wansview.left}{/decoder_control.cgi?command=4&onestep=1}
{command}{wansview.right}{/decoder_control.cgi?command=6&onestep=1}
{command}{wansviewstartvertpan}{/decoder_control.cgi?command=26}
{command}{wansview.stopvertpan}{/decoder_control.cgi?command=1}
{command}{wansview.starthorpan}{/decoder_control.cgi?command=28}
{command}{wansview.stophorpan}{/decoder_control.cgi?command=1}
{command}{wansview.gotohome}{/decoder_control.cgi?command=25}
{command}{wansview.snapshot}{/videostream.cgi?user=XXXXX&pwd=XXXXX}
{command}{wansview.protocol}{http://}
{camera}{192.168.1.5:80}{wansview}{Zimmer}{XXXX}{XXXXX}

fab · Jan 21st 2012

Und hier mal ein Teil des Crahlogs:

Looking for embedded skin
entering setPicLoadConf()
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++, width=640 ,height=480
[Picload] setPara max-X=640 max-Y=480 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
entering start_decode()
GetMyURLImage::entering __int__()
trying: authheader=Basic YWRtaW46YWxmYXJvbWVv,url=http://192.168.1.5:80/videostream.cgi?user=XXXXX&pwd=XXXXXX
main thread is non-idle! display spinner!
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 2348700 bytes for cache used
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 2348700 bytes for cache used
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
res = self.actions[action]()
File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 56, in save
self.run()
File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 60, in run
plugin(session=self.session)
File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 1234, in main
File "/usr/lib/enigma2/python/mytest.py", line 319, in open
dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
File "/usr/lib/enigma2/python/mytest.py", line 254, in instantiateDialog
return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
File "/usr/lib/enigma2/python/mytest.py", line 285, in doInstantiateDialog
dlg.applySkin()
File "/usr/lib/enigma2/python/Components/GUISkin.py", line 112, in applySkin
self.createGUIScreen(self.instance, self.desktop)
File "/usr/lib/enigma2/python/Components/GUISkin.py", line 47, in createGUIScreen
f()
File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 521, in setPicloadConf
File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 583, in start_decode
File "/usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/plugin.py", line 107, in __init__
File "/usr/lib/python2.6/socket.py", line 355, in read
buf.write(data)
MemoryError: out of memory
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x2ff10be8>>,('WizardActions', 'ok')) failed)
]]>
</enigma2crashlog>
<pythonMD5sum>

Hoffe das reicht für eine Hilfe.

IPCamViewer for Enigma2

Who is / was online?

Users Online 31

Wer war online 103