IPCamViewer for Enigma2

    ftsp:
    It is for people without an IP camera to be able to see hoe IPCamViewer works. It runs on the STB using recorded disk files of captured images rather than accessing a real camera ie. it emulates a camera.
    I dont think I will make it available again as there are unsecured cameras that can be used for testing like the camera at the Foscam development centre.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

    i see, but that sounds great to play back the recorded jpg's from the /media/hdd/IPCamViewer if you do have a camera .


    no clue how to test it though, as i haven't been able to find it anywhere .


    btw, i've added several more cameras to the config, tried everything out and your plugin is top bollocks ..

    The normalpicture player on the STB can play back the recorded images.


    The emulator is no good for playing back recorded images in standard form. |The emulator images are named in such a way as to allow the cam movement functionality, so it is not possible to play back standard rwecordings

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

    Attached an attempt at better parsing of the conf file - this is by no means perfect, but should improve things somewhat, like getting rid of extraneous spaces.


    copy the 2 files, plugin.pyo and plugin.pyc, to /usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer. Make sure the file transfer is binary not text.



    REQUIRES PREVIOUSLY INSTALLED VERSION

    Hello shumifan50
    You write that the latest version of IPCamViewer at OpenPLi be found.


    At the moment there is nothing at OpenPLi! ….


    Can you provide an updated version of IPCamViewer here in the forum? Or is the version of 1 Post up to date?


    Thank you, JG

    Attached the new version with a proper .ipk installation package and documentation. It also includes the CamEmulator .ipk installation.


    Please read the documentation in the zip file.


    You do not have to install the CamEmulator package.


    REMEMBER to save IPCamViewer.conf before installing the new .ipk

    After last updates of image I have a crash whenever open picture on full screen, but crashlog is empty. Picture on full screen is visible for one sec and then enigma2 restarts. Any solution?

    Hi @ll,


    I have a Pproblem to set up the config File. Could someone help me please.


    IP Cam : Vivotek 7330


    Firefox: http://192.168.178.2/video2.jpg


    Setup:
    HTTP:
    Port 80
    video2.jpg
    Authentifizierung: disable



    RTSP-Streaming
    Authentifizierung: disable
    live.sdp
    Port: 554
    RTP-Port für Video: 5556
    RTCP-Port für Video: 5557



    I tryed this: and my 500HD crashed.
    {command}{foscam2.snapshot}{/video2.jpg}
    {command}{foscam2.protocol}{http://}
    {camera}{192.168.178.2:80}{foscam2}{Kitchen}{admin}{admin}


    VLC-Player with Link " http://192.168.178.2:80/video2.jpg " is O.K


    LOG:
    entering start_decode()
    GetMyURLImage::entering __int__()
    trying: authheader=Basic YWRtaW46YWRtaW4=,url=http://192.168.178.002:80/video2.jpg
    main thread is non-idle! display spinner!



    Thanks

    siggi126 :
    There is currently a problem with some cameras when authentication is disabled. I will look at the problem when I have time. It seems that even though authentication is disabled, IPCamViewer still includes basic authentication headers and some cameras then consider it an invalid access. Try enabling authentication as it might fix the problem. Otherwise you will have to try the fiddle earlier in this thread to fool the parser.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

    Siggie
    Is that "video2.jpg" a snapshot or a stream? You are playing it through VLC.
    Instead use your browser to go to the link - if you get moving video the url for the camera is wrong, it has to show a SINGLE picture from the camera.
    I would expect something like "image.jpg" - "video.jpg" might be "mjpeg" which is not supported.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

    Einmal editiert, zuletzt von shumifan50 ()

    A new version that avoids some crashes if there is only non-working cameras.
    Unzip and copy the plugin.* files to /usr/lib/emigma2/python/Plugins/Extensions/IPCamViewer.
    Restart enigma.



    PLEASE PROVIDE FEEDBACK ON THE BEHAVIOUR OF THE NEW VERSION.

    The reason for not supporting streams are extensively covered earlier in this thread.
    I will be VERY surprised if your camera does not support snapshots - all camers that I know of does. I will be surprised if Vivotek does not. Look through this thread, I think there are settings for Vivotek. Just contact the vendor or search on the web to find the correct URL.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

    hi
    i have a watchbot camera , someone here have the config for this cam , trayed with several combination and no luck.
    please need a help

    Hi



    Kann mir jemand helfen?
    Bekomme auch nur die Zahnräder zu sehen...... :frowning_face:


    Habe folgende cfg:


    {command}{Hootoo.snapshot}{/snapshot.jpg?user=admin&password=XXX}
    {command}{Hootoo.protocol}{http://}
    {camera}{192.168.178.X.X}{Hootoo}{Garten}{admin}{XXX}


    Wenn ich diereckt im Browser folgendes eingebe bekomme ich einen Snapshot


    http://192.168.XXX.X/snapshot.jpg?user=admin&pwd=XXX



    Was mache ich denn falsch?
    Hardware: Box 500HD
    Cam Hootoo


    Hallo,


    ich habe bei mir das eingetragen.Der Port nach der IP ist in den Einstellungen der Cam zu finden.


    {command}{Hootoo.snapshot}{/snapshot.cgi}
    {command}{Hootoo.protocol}{http://}
    {camera}{192.168.178.X.X: Port}{Hootoo}{Garten}{admin}{XXX}