IPCamViewer for Enigma2

  • steht doch da..



    config.ipcam.startWithPIP=false
    ändere false in true

    2x Dm 8000, Ds409, Qnap TS-459 Pro II, SPF-107H,Onkyo TX NR-509,Teufel Consono 35,PS3,Fritzbox 7270,7390,Wii,XboX1,Down 50 Mbits, Up 10 Mbits

  • sorry... der Tag war eigentlich nicht so schlimm! :kaffee:



    DANKE!!!!

  • hmmm.....


    also ich vertsehe nur bahnhof,
    habe auch eine ip cam, und den "IPCamViewer"
    wie und was muss ich denn verändern damit ich sie auch auf meiner box sehe??


    DANKE
    im vorraus


    mfg
    mike

  • Was haste denn schon vorbereitet?


    - Cam und Dreambox im gleichen Netzwerk?
    - IPCAM viewer installiert?
    - configdatei angepasst?

  • he das ging ja schnell...


    also habe eine geovision mini doom,
    ja box und cam sind im gleichen netz.


    denn IPCAM viewer habe ich mir unter erweiterungen runtergeladen und installiert.


    bezüglich der configdatei habe ich noch nichts gemacht!!

  • die config-datei musst Du dann nur noch entsprechend der IP-Adresse der Cam und dem cam-spezifischen Bild-Protokoll anpassen.


    Bei mir sieht das so aus: (unten - es sind bei mir 3 cams)


    {command}{foscam.up}{/decoder_control.cgi?command=0&onestep=1}
    {command}{foscam.down}{/decoder_control.cgi?command=2&onestep=1}
    {command}{foscam.left}{/decoder_control.cgi?command=4&onestep=1}
    {command}{foscam.right}{/decoder_control.cgi?command=6&onestep=1}
    {command}{foscam.zoomin}{/decoder_control.cgi?command=6&onestep=1}
    {command}{foscam.zoomout}{/decoder_control.cgi?command=4&onestep=1}
    {command}{foscam.startvertpan}{/decoder_control.cgi?command=26}
    {command}{foscam.stopvertpan}{/decoder_control.cgi?command=1}
    {command}{foscam.starthorpan}{/decoder_control.cgi?command=28}
    {command}{foscam.stophorpan}{/decoder_control.cgi?command=1}
    {command}{foscam.gotohome}{/decoder_control.cgi?command=25}
    {command}{foscam.snapshot}{/snapshot.cgi}
    {command}{foscam.protocol}{http://}
    {command}{foscam2.up}{/decoder_control.cgi?command=0&onestep=1}
    {command}{foscam2.down}{/decoder_control.cgi?command=2&onestep=1}
    {command}{foscam2.left}{/decoder_control.cgi?command=4&onestep=1}
    {command}{foscam2.right}{/decoder_control.cgi?command=6&onestep=1}
    {command}{foscam2.zoomin}{/decoder_control.cgi?command=6&onestep=1}
    {command}{foscam2.zoomout}{/decoder_control.cgi?command=4&onestep=1}
    {command}{foscam2.startvertpan}{/decoder_control.cgi?command=26}
    {command}{foscam2.stopvertpan}{/decoder_control.cgi?command=1}
    {command}{foscam2.starthorpan}{/decoder_control.cgi?command=28}
    {command}{foscam2.stophorpan}{/decoder_control.cgi?command=1}
    {command}{foscam2.gotohome}{/decoder_control.cgi?command=25}
    {command}{foscam2.snapshot}{/snapshot.cgi}
    {command}{foscam.snapshot}{/snapshot.cgi?user=user&pwd=Password}
    {command}{foscam.protocol}{http://}
    {camera}{192.168.178.27:80}{foscam}{Feldweg}{user}{Password}
    {command}{instar2.snapshot}{/snapshot.cgi?user=user&pwd=Password}
    {command}{instar2.protocol}{http://}
    {camera}{192.168.178.37:80}{instar2}{Terasse}{user}{Password}
    {command}{ycam.snapshot}{/snapshot.jpg?}
    {command}{ycam.protocol}{http://}
    {camera}{192.168.178.49:80}{ycam}{carport}{USER}{Password}

  • Auszug aus der Beschreibung des Plugins:



    Configuration.
    Configuration is a two stage process:
    Set up the camera commands and cameras using a PC
    Edit the file /usr/lib/enigma2/python/Plugins/Extensions/IPCamViewer/IPCamViewer.conf
    Change, add or delete commands and cameras as required (see details below).
    Set up the various options supported by the plugin from the dreambox remote control.
    See details below.

  • Before you try to access the camera from the Dreambox, you MUST use the string you are setting up in the config file from a browser and it MUST RETRIEVE A SINGLE IMAGE FROM THE CAMERA. If you dont get this to work, then IPCAMVIEWER will not work and will cause your box to hang.
    The strings to retrieve a snapshot (jpg) is different for each camera and you have to find the correct string for your camera. The default config only works for Foscam cameras.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

  • okay, danke irgendwie logisch....
    das ich zuerst tesetn mus ob es im browser läuft.
    aber so wie ich das sehe wird das wohl nicht mit meiner cam da ich, wenn ich ein live bild anschauen will, es nur über den i-explorer geht und da auch nur wenn ich active steuerelemente zu lasse :frowning_face:
    und ich im moment nicht wüsste wo ich einen string für die cam bekommen würde.

  • What make camera do you have?
    What model camera do you have?

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

  • normalerweise hat jede cam so einen (oder auch 2 oder3) "streams" in dem sie das Livebild in das Netzwerk "schiesst" - goggle mal ein wenig - vielleicht findest Du etwas....


    Die Steuerung über Active-X ist meist ein "Aufsatz", der zusätzliche Dinge ermöglicht (Rotation, Zoom, etc.)

  • Unless you tell us the make and model of the camera, we cannot and will not help you any further.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

  • I have had a look on the internet(quickly) but cannot find documentation of the commands for your camera. Contact your supplier as they must have it available somewhere. If you find it, post it here as it might be usefull to other people.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.

  • Hallo zusammen,


    irgendwie bekomme ich meine Hootoo Cam nicht ans laufen.


    Ich hab schon verschiedenste Configs ausprobiert, aber nix läuft, entweder
    grüner Bildschirm oder Zahnräder und die Box hängt sich auf.


    Momentan hab ich folgende Config:


    {command}{Hootoo.snapshot}{/img/snapshot.cgi}
    {command}{Hootoo.protocol}{http://}
    {camera}{192.168.178.xx:xx}{Hootoo}{xxxx}{User}{PW}


    Ist es richtig, dass hinter der IP der Port eingetragen wird?
    Wie kann ich denn in Erfahrung bringen, welches Protokoll meine Cam
    unterstützt (erste Zeile)?


    Ich nehme alles zurück!!!


    Mit dieser Einstellung bekomme ich zumindest ein Bild:
    {command}{Hootoo.snapshot}{/snapshot.cgi?user=admin&pwd= ""}
    {command}{Hootoo.protocol}{http://}
    {camera}{192.168.178.xx:xx}{Hootoo}{xxxx}{user}{PW}

  • Conbey: If you post in english i will try to help. Unfortunately I dont understand german.

    2 x DM7025SS (Gemini2v4.4), DM600(PCD 7.0), DM800S (Gemini 4.4) TM9100(UR9B2), DM500HD, Triax 88cm dish, Technomate motor.