kann andere db nicht mounten

  • Ich würde gerne die Festplatten meiner Dreamboxen und mein NAS miteinander verbinden.


    Über meinem MAC kann ich nur über cifs auf die Boxen zugreifen, ist allerdings egal was für einen usr und passwd ich angebe.


    Ich habe über das BP auf allen 3 Boxen NFS Server aktiviert und nun versucht über automount die jeweilige Platte zu mounten nur sind die Verzeichnisse leer.


    Gibt es nicht eine möglich keit das über exports und fstab zu machen die Eingabe über die FB macht mich noch wahnsinnig


    Danke für Eure Hilfe



    Dreamboxen:


    Typ : DB 8000
    DHCP: aus
    IP: 192.168.1.50
    SubnetMask : 255.255.255.0
    Nameserver :192.168.1.2
    Gateway : 192.168.1.2



    Typ : DM 8000
    DHCP: aus
    IP: 192.168.1.51
    SubnetMask : 255.255.255.0
    Nameserver :192.168.1.2
    Gateway : 192.168.1.2


    Typ : DM 800se
    DHCP: aus
    IP: 192.168.1.52
    SubnetMask : 255.255.255.0
    Nameserver :192.168.1.2
    Gateway : 192.168.1.2
    PC


    Betriebssystem : OSX 10.6
    Firewall : inaktiv


    NAS Windows 2008 Server


    IP: 192.168.1.5
    SubnetMask : 255.255.255.0
    Nameserver :192.168.1.2
    Gateway : 192.168.1.2


    Gatway ist eine Fitzbox 7270

  • hallo,


    das gleiche Problem habe ich auch.


    nutze einen Windows 7 Enterprise System als NAS.


    Boxen - 1x dm8000 und eine dm 500hd


    netzwerkeinstellungen sind alle fest wie beim themaersteller.


    nutze überall neustes board image mit gp3

    • Offizieller Beitrag

    In deinem Falls kannst du mittels cifs auf dein Win7
    zugreifen.


    Freigabe erstellen und dann mittels Automounter
    und korrekter Syntax auf dein Gerät zugreifen.


    Wird sicher so wie hier klappen:


    Verbindung zu Pc

    • Offizieller Beitrag

    Schau mal da rein ist noch Druckfrisch LINK denke das sollte dich weiterbringen.

  • Hi Mr.Bunny,


    deine Anleitung ist wirklich perfekt nur wohl nicht für meine Boxen haben alle ein root passwd, ich denke mal es liegt daran das mein /mnt/db1 leer ist oder?


    db1 -fstype=nfs,soft,udp,nolock,rsize=8192,wsize=8192 192.168.1.50:/media/hdd

    • Offizieller Beitrag

    Wie sind denn deine Freigaben auf den Boxen?
    exportfs -v bringt dich da weiter.
    Ein ps auf der Serverbox ist auch interessant.


    Und bei nfs v3 brauchst du kein Passwort und Benutzer zum mounten.


    Ist sicher nur was kleines :winking_face:
    Aber es fehlen halt noch ein paar Angaben von dir...

  • Die serverbox hat die default config lt. anleuting von bunny ist das auch ausreichend:
    und das ist der Eintrag bei der Client box
    db1 -fstype=nfs,soft,udp,unlock,rsize=8192,wsize=8192 192.168.1.50:/media/hdd

  • mfgeg wollte wohl wissen wie die ausgaben via telnet von der serverbox aussehen.


    exportfs -h


    dann kannst auch noch die ausgabe von
    ps
    auf der serverbox hier mit einfügen...

    gefundene Rechtschreibfehler beruhen auf einer individuellen Rechtschreibreform.

  • exportfs -h ?


    schau mal:
    root@dm8000:~# exportfs -h
    exportfs: invalid option -- 'h'
    usage: exportfs [-aruv] [host:/path]
    root@dm8000:~# exportfs -a
    root@dm8000:~# exportfs -r
    root@dm8000:~# exportfs -u
    /media/hdd <world>
    root@dm8000:~# exportfs -v
    /media/hdd <world>(rw,wdelay,root_squash,no_subtree_check)
    root@dm8000:~#

  • root@dm8000:~# ps
    PID USER VSZ STAT COMMAND
    1 root 1724 S init [3]
    2 root 0 SW [migration/0]
    3 root 0 SWN [ksoftirqd/0]
    4 root 0 SW [migration/1]
    5 root 0 SWN [ksoftirqd/1]
    6 root 0 SW< [events/0]
    7 root 0 SW< [events/1]
    8 root 0 SW< [khelper]
    9 root 0 SW< [kthread]
    10 root 0 SW< [kblockd/0]
    11 root 0 SW< [kblockd/1]
    12 root 0 SW< [khubd]
    13 root 0 SW [pdflush]
    14 root 0 SW [pdflush]
    15 root 0 SW< [kswapd0]
    16 root 0 SW< [aio/0]
    17 root 0 SW< [aio/1]
    18 root 0 SW< [ata/0]
    19 root 0 SW< [ata/1]
    20 root 0 SW< [ata_aux]
    21 root 0 SW< [scsi_eh_0]
    22 root 0 SW< [scsi_eh_1]
    23 root 0 SW [mtdblockd]
    24 root 0 SW< [scsi_eh_2]
    25 root 0 SW< [usb-storage]
    27 root 0 SWN [jffs2_gcd_mtd3]
    84 root 2180 S < udevd --daemon
    373 root 0 SWN [jffs2_gcd_mtd4]
    374 root 0 SW< [kjournald]
    461 root 0 SW [b_event]
    462 root 0 SW [b_idle]
    489 root 0 SW< [dmx0]
    495 root 0 SW< [dmx1]
    501 root 0 SW< [dmx2]
    506 root 0 SW< [dmx3]
    507 root 0 SW< [dmx4]
    508 root 0 SW< [dmx_hw_sec]
    534 root 0 SW< [isl6423]
    536 root 0 SW< [isl6423]
    537 root 0 SW< [ci0]
    539 root 0 SW< [ci1]
    540 root 0 SW< [ci2]
    541 root 0 SW< [ci3]
    561 root 1928 S /usr/bin/wdog tpmd
    562 root 4312 S tpmd
    573 avahi 3056 S avahi-daemon: running [dm8000-2.local]
    574 avahi 2932 S avahi-daemon: chroot helper
    636 root 1712 S /usr/sbin/zeroconf -i eth0
    663 root 2348 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host
    673 root 1832 S /usr/sbin/inetd
    687 daemon 1708 S /usr/sbin/portmap
    693 root 0 SW [nfsd]
    694 root 0 SW [nfsd]
    695 root 0 SW [nfsd]
    697 root 0 SW [lockd]
    698 root 0 SW< [rpciod/0]
    699 root 0 SW< [rpciod/1]
    700 root 2252 S /usr/sbin/mountd -p 2048
    705 root 6348 S /usr/sbin/smbd
    707 root 3764 S /usr/sbin/nmbd
    817 root 2256 S /usr/sbin/automount --pid-file=/var/run/autofs/_autof
    881 root 2516 S /bin/sh /usr/bin/enigma2.sh
    889 root 1696 S /usr/bin/gdaemon
    907 root 16876 S /usr/bin/djmount /media/Upnp
    908 root 16876 S /usr/bin/djmount /media/Upnp
    909 root 16876 S /usr/bin/djmount /media/Upnp
    912 root 16876 S /usr/bin/djmount /media/Upnp
    915 root 16876 S /usr/bin/djmount /media/Upnp
    916 root 16876 S /usr/bin/djmount /media/Upnp
    919 root 16876 S /usr/bin/djmount /media/Upnp
    920 root 16876 S /usr/bin/djmount /media/Upnp
    17911 root 16876 S /usr/bin/djmount /media/Upnp
    17912 root 16876 S /usr/bin/djmount /media/Upnp
    925 root 13088 S /usr/bin/ushare -i eth0 -R 0 -n Upnp-Dreambox-0 -c /m
    927 root 13088 S /usr/bin/ushare -i eth0 -R 0 -n Upnp-Dreambox-0 -c /m
    929 root 13088 S /usr/bin/ushare -i eth0 -R 0 -n Upnp-Dreambox-0 -c /m
    930 root 13088 S /usr/bin/ushare -i eth0 -R 0 -n Upnp-Dreambox-0 -c /m
    931 root 13088 S /usr/bin/ushare -i eth0 -R 0 -n Upnp-Dreambox-0 -c /m
    933 root 13088 S /usr/bin/ushare -i eth0 -R 0 -n Upnp-Dreambox-0 -c /m
    934 root 13088 S /usr/bin/ushare -i eth0 -R 0 -n Upnp-Dreambox-0 -c /m
    926 root 80828 S /usr/bin/enigma2
    949 root 80828 S N /usr/bin/enigma2
    950 root 80828 R /usr/bin/enigma2
    954 root 80828 S N /usr/bin/enigma2
    990 root 80828 S /usr/bin/enigma2
    939 root 6348 S /usr/sbin/smbd
    941 root 6896 S /usr/sbin/smbd
    997 root 21316 S /usr/bin/CCcam_2.2.1
    998 root 21316 S /usr/bin/CCcam_2.2.1
    999 root 21316 S /usr/bin/CCcam_2.2.1
    1000 root 21316 S /usr/bin/CCcam_2.2.1
    1001 root 21316 S /usr/bin/CCcam_2.2.1
    1002 root 21316 S /usr/bin/CCcam_2.2.1
    1003 root 21316 S /usr/bin/CCcam_2.2.1
    1004 root 21316 S /usr/bin/CCcam_2.2.1
    1005 root 21316 S /usr/bin/CCcam_2.2.1
    1010 root 21316 S /usr/bin/CCcam_2.2.1
    1011 root 21316 S /usr/bin/CCcam_2.2.1
    1012 root 21316 S /usr/bin/CCcam_2.2.1
    1013 root 21316 S /usr/bin/CCcam_2.2.1
    1014 root 21316 S /usr/bin/CCcam_2.2.1
    1029 root 21316 S /usr/bin/CCcam_2.2.1
    1031 root 21316 S /usr/bin/CCcam_2.2.1
    1953 root 0 SW [kdvb-fe-0]
    3514 root 2836 S telnetd
    3515 root 2832 S -sh
    3676 root 2832 R ps

  • Zitat

    Original von bigtigger
    Hi Mr.Bunny,


    deine Anleitung ist wirklich perfekt nur wohl nicht für meine Boxen haben alle ein root passwd, ich denke mal es liegt daran das mein /mnt/db1 leer ist oder?


    db1 -fstype=nfs,soft,udp,nolock,rsize=8192,wsize=8192 192.168.1.50:/media/hdd



    der mount ist danach nicht in /mnt/db1 sondern unter /media/net/db1 zu finden