Ralink kernel-module rt2570 und rt3070sta bis 150Mb/s
Sorry, der Download-link war noch für module-2.6.18-7.3
Download module.2.6.18-7.3 und firmware-all
im Anhang jetzt für 2.6.18-7.4
gruß pclin
Ralink kernel-module rt2570 und rt3070sta bis 150Mb/s
Sorry, der Download-link war noch für module-2.6.18-7.3
Download module.2.6.18-7.3 und firmware-all
im Anhang jetzt für 2.6.18-7.4
gruß pclin
ich habe mir so ein no name teil bei ebay gekauft: USB 2.0 54Mbit Stick WLAN Wireless LAN WIFI Antenne
dieser stick hat den rt3070 chipsatz. jedoch wird der wlan stick mit gemini 5.10 nicht erkannt. erst wenn ich den patch von hier einspiele: [Sammelposten] Wir bauen Xorg für enigma2 wird der stick erkannt.
jedoch bekomme ich ein greenscreen (siehe anhang), wenn ich den stick mit meinem router verbinden will. wieso ist das so? weil gemini 5.10 nicht den 2.6.18-7.4-r1 kernel hat?
Mit rt2870 Chipsatz geht es bei mir mit neuem kernel.
In anderen Images noch nicht getestet !
Mit rt3070.stick habe ich auch noch keinen Erfolg !
Wird zwar erkannt und module wird geladen, ist in Einstellungen/Netzwerk dann auch vorhanden lässt sich abernicht verwenden.
Eigentlich sollte mit dem rt3070sta kernel-module Ralink
rt2870 / rt2770 / rt307x / rt2070
funktionieren.
gruß pclin
ps
wird das module automatisch geladen ? (cat /proc/modules)
was meldet cat /proc/bus/usb/devices ?
MSI WLAN 11n US300EX Lite geht bei mir !
cat /proc/modules gibt folgendes aus:
root@(none):~# cat /proc/modules
bcm7401 3097888 5 - Live 0xc055e000
alps_bsbe1_c01a 16960 1 bcm7401, Live 0xc013f000
alps_bsbe1 6080 1 bcm7401, Live 0xc0128000
alps_bsbe2 44000 1 bcm7401, Live 0xc014d000
lnb_ctrl 5728 3 alps_bsbe1_c01a,alps_bsbe1,alps_bsbe2, Live 0xc0125000
tu1216 41840 1 bcm7401, Live 0xc0133000
cu1216mk3 8384 1 bcm7401, Live 0xc0121000
dreambox_keyboard 4240 0 - Live 0xc011e000
dreambox_rc2 5728 1 dreambox_keyboard, Live 0xc0098000
rt3070sta 651264 1 - Live 0xc017f000
lcd 13696 1 - Live 0xc008f000
stb_core 51152 10 bcm7401,alps_bsbe1_c01a,alps_bsbe2,lnb_ctrl,cu1216mk3,dreambox_keyboard,dreambox_rc2,lcd, Live 0xc009d000
Alles anzeigen
und cat /proc/bus/usb/devices:
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3-dm800 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3-dm800 ohci_hcd
S: Product=BRCM OHCI
S: SerialNumber=ohci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-7.3-dm800 ehci_hcd
S: Product=BRCM EHCI
S: SerialNumber=ehci-brcm
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=125f ProdID=c92a Rev= 1.00
S: Manufacturer=A-DATA
S: Product=A-DATA USB Flash Drive
S: SerialNumber=8bc09e45bf54e2
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=16ms
Alles anzeigen
Naja, halb so schlimm! Werde ich mir wohl einen anderen Stick kaufen.
Edit: Läuft der US300EX Lite mit oder ohne deinen Patch (auch auf Gemini Images)?
module wird geladen und Wlan-Stick erkannt, triber zugeordnet.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Alles anzeigen
soweit ist alles OK
kannst du ihn konfigurieren ?
wie sieht /etc/network/interfaces aus ?
dein Crash.log kann ich nicht öffnen.
gruß pclin
/etc/network/interfaces sieht so aus:
Er findet meine FritzBox ich klicke auf verbinden mit WPA/WPA2 Key und dann sagt er zweites Netzwerk erkannt aktivieren/deaktivieren und egal was ich dort auswähle, danach ist feierabend.
wieso kannst du meine xml nicht öffnen?
Läuft der US300EX Lite mit oder ohne deinen Patch (auch auf Gemini Images)?
mit der /etc/network/interfaces kann es nur Probleme geben.
es sollte ohne Verschlüsselung etwa so aussehen.
# automatically generated by enigma 2
# do NOT change manually!
auto lo
iface lo inet loopback
auto ra0
iface ra0 inet dhcp
pre-up iwconfig ra0 essid "home"
pre-up /usr/sbin/wpa_supplicant -ira0 -c/etc/wpa_supplicant.conf -B -dd -Dwext
post-down wpa_cli terminate
iface eth0 inet static
address 192.168.178.22
netmask 255.255.255.0
gateway 192.168.178.1
Alles anzeigen
und das wurde "automatically generated by enigma 2" !
im gemini2-5.10 kann ich es zur Zeit nicht testen, wenn es aber so ist wie du schreibst scheint es entweder am rt3070 Stick und/oder gemini2 zu liegen.
kann man nur weiter testen !
du kannst ja mal die /etc/network/interfaces editieren und es noch mal Versuchen.
gruß pclin
mit rt3070 Chipsatz (USB-Stick noName 5,99 €)
Ebay dIrekt kauf 7,49 incl. Versand
T: Bus=01 Lev=03 Prnt=05 Port=03 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=?.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Alles anzeigen
es ging nur kein DHCP !
gruß pclin
150Mb/s Verbingung erfolgreich !
Da meine FritzBox nur 54Mb/s kann, habe ich jetzt einfach den rt3070 USB_Stick in WindowsXP als SoftAP eingesetzt.
Auf der DM800 den MSI US300EX
Stufen 150 / 135 und 120 hatte ich bis jetzt !
Hervorragende Signalstärke bis -77 dBm (bei mir bis jetzt max. 1 Wand)
Voller erfolg
gruß pclin
ZitatOriginal von pclin
[es ging nur kein DHCP !
d.h. mein billig stick läuft? nur hat der stick bzw. dir fritzbox probleme mit DHCP?
läuft der US300EX ohne zusätzliche treiber? oder läuft der stick erst mit deinem patch?
ZitatOriginal von user31085
d.h. mein billig stick läuft? nur hat der stick bzw. dir fritzbox probleme mit DHCP?
läuft der US300EX ohne zusätzliche treiber? oder läuft der stick erst mit deinem patch?
Der MSI WLAN 11n US300EX Lite ist bis jetzt der beste / unproblematischste 11n Stick !!!
kernel-module-rt3070sta Installieren
USB-Stick einstecken
enigma2 neustarten bzw. besser neubooten !
und in Einstellungen/System/Netwerk aktivieren.
Das war's, geht dann auch mit DHCP.
Möchte man zwischen Wlan Netzwerken wechseln, geht das bei mir nur indem ich erst auf LAN (only) umschalte, dann die Box neuboote, und dann in Einstellungen/System/Netwerk die Einstellungen von Hand vornehmme !
gruß pclin
ps
beide Sticks gehen bei mir weder an LinuxMint9 (athlon64) oder an Debian-lenny (P3) dort werden zwar kernel-module sofort geladen, aber es erfolgt keine Treiber Zuordnung, Sticks sind nicht Betriebsbereit !
Also ähnlich wie mit dem rt3572 an der Dream.
WindowsXP beide Sticks (rt2870 & rt3070) gehen Problemlos, auch als SoftAP. beide mit RT3070-Installationssoftware.
im ersten Post sind jetzt die kernel-module-2.6.18-7.4
und der Download link führt zu kernel-module-2.6.18-7.3
und ralink-firmware-all (kernel unabhängig)
gruß pclin
Ich werde die Treiber für den 2.6.18-7.3 Kernel gleich ausprobieren und mich wieder melden. Ich werde vorher nur einmal komplett neu flashen, damit keine alten Treiber-Rückstände im Gemini 5.1 sind.
Hoffentlich gehts!
INFO:
von Hand laden:
#[kernel 2.6]
modprobe rt3070sta
/sbin/ifconfig ra0 inet YOUR_IP up
#wpa_supplicant -Dwext -ira0 -c/etc/wpa_supplicant.conf
#ifconfig ra0 IP_ADRESSE
route add default gw IP_ADRESSE_DES_ROUTERS
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt3070sta
die /etc/Wireless/RT2870STA/RT2870STA.dat wird nicht benötigt.
Der Treiber wurde mit
auch die Firmware braucht man nicht.
/etc/wpa_supplicant.conf (Beispiel)
#WPA Supplicant Configuration by enigma2
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
fast_reauth=1
ap_scan=2
network={
ssid="home"
scan_ssid=0
key_mgmt=NONE
}
/etc/Wireless/RT2870STA/RT2870STA.dat
CONFIGURATION:
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file
i) iwconfig comes with kernel.
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
gruß pclin
iwpriv
=================
This is detailed explanation of each parameters for iwpriv.
Before reading this document, make sure you already read README.
-------------------------------------------------------------------------------------------------------
USAGE:
iwpriv ra0 set [parameters]=[val]
NOTE:
Execute one iwpriv/set command simultaneously.
where
[parameters] [val]
{range}
----------------- -------------------------------------------------
CountryRegion {0~7}
::Set country region
0: 1 ~ 11 ch
1: 1 ~ 13 ch
2: 10, 11 ch
3: 10 ~ 13 ch
4: 14 ch
5: 1 ~ 14 ch
6: 3 ~ 9 ch
7: 5 ~ 13 ch
31: 1 ~ 14 ch (ch1-11:active scan, ch12-14 passive scan)
CountryRegionABand {0~11}
::Set country region for A band
0: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 ch
1: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch
2: 36, 40, 44, 48, 52, 56, 60, 64 ch
3: 52, 56, 60, 64, 149, 153, 157, 161 ch
4: 149, 153, 157, 161, 165 ch
5: 149, 153, 157, 161 ch
6: 36, 40, 44, 48 ch
7: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 ch
8: 52, 56, 60, 64 ch
9: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 ch
10: 36, 40, 44, 48, 149, 153, 157, 161, 165 ch
11: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 ch
SSID {0~z, 1~32 ascii characters}
::Set AP SSID
WirelessMode {0~10}
::Set Wireless Mode
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only
3: legacy 11a/b/g mixed
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed
Channel depends on CountryRegion or CountryRegionForABand
::Set Channel
BGProtection {0~2}
::Set 11B/11G Protection
0:Auto,
1:Always on,
2:Always off
TxPreamble {0~2}
::Set TxPreamble
0:Preamble Long,
1:Preamble Short,
2:Auto
RTSThreshold {1~2347}
::Set RTS Threshold
FragThreshold {256~2346}
::Set Fragment Threshold
TxBurst {0,1}
::Set TxBurst Enable or Disable
0:Disable,
1:Enable
NetworkType {Infra,Adhoc}
::Set Network type
AuthMode {OPEN,SHARED,WEPAUTO,WPAPSK,WPA2PSK,WPANONE}
::Set Authentication Mode
EncrypType {NONE,WEP,TKIP,AES}
::Set Encryption Type
DefaultKeyID {1~4}
::Set Default Key ID
Key1 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key1 String
Key2 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key2 String
Key3 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key3 String
Key4 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key4 String
WPAPSK {8~63 ascii or 64 hex characters}
::WPA Pre-Shared Key
WmmCapable {0,1}
::Set WMM Capable
0:Disable WMM,
1:Enable WMM
PSMode {CAM, MAX_PSP, FAST_PSP}
::Set Power Saving Mode
HtBw {0,1}
::Set BandWidth
0: 20Hz
1: 40Hz
HtMcs {0 ~ 15, 33}
::Set MCS
33: Auto Rate
HtGi {0,1}
::Set Guard Interval(GI)
0: long GI
1: short GI
HtOpMode {0,1}
::Set HT Operation Mode
0: HT mixed format
1: HT greenfield format
HtExtcha {0,1}
::Set Extended Channel Switch Announcement
0: Below
1: Above
HtMpduDensity {0 ~ 7}
::Set The Minimum Time Between MPDUs within an AMPDU
HtBaWinSize {1 ~ 64}
::Set BA WinSize
HtRdg {0,1}
::Set RDG Capable
0: Disabled
1: Enabled
HtAmsdu {0,1}
::Set AMSDU Capable
0: Disabled
1: Enabled
HtAutoBa {0,1}
::Set Auto BA Capable
0: Disabled
1: Enabled
HtBaDecline {0,1}
::Reject BA request from AP
0: Disabled
1: Enabled
HtProtect {0,1}
::Set HT Protect Capable
0: Disabled
1: Enabled
FixedTxMode {CCK, OFDM}
:: Set Fixed Tx Mode for fixed rate setting
Mode = CCK
MCS = 0 => 1Mbps
= 1 => 2Mbps
= 2 => 5.5 Mbps
= 3 => 11 Mbps
Mode = OFDM
MCS = 0 => 6Mbps
= 1 => 9Mbps
= 2 => 12Mbps
= 3 => 18Mbps
= 4 => 24Mbps
= 5 => 36Mbps
= 6 => 48Mbps
= 7 => 54Mbps
LongRetry {0,255}
:: Set Tx Long Retry Limit
ShortRetry {0,255}
:: Set Tx Short Retry Limit
Examples
===================================================================
-------------------------------------------------------------------------------------------------------
a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=OPEN
3. iwpriv ra0 set EncrypType=NONE
4. iwpriv ra0 set SSID="AP's SSID"
b> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=SHARED
3. iwpriv ra0 set EncrypType=WEP
4. iwpriv ra0 set DefaultKeyID=1
5. iwpriv ra0 set Key1="AP's wep key"
6. iwpriv ra0 set SSID="AP's SSID"
c> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=WPAPSK
3. iwpriv ra0 set EncrypType=TKIP
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK="AP's wpa-preshared key"
6. iwpriv ra0 set SSID="AP's SSID"
d> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=WPAPSK
3. iwpriv ra0 set EncrypType=AES
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK="AP's wpa-preshared key"
6. iwpriv ra0 set SSID="AP's SSID"
e> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Infra
2. iwpriv ra0 set AuthMode=WPA2PSK
3. iwpriv ra0 set EncrypType=TKIP
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK=12345678
6. iwpriv ra0 set SSID="AP's SSID"
f> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Adhoc
2. iwpriv ra0 set AuthMode=OPEN
3. iwpriv ra0 set EncrypType=NONE
4. iwpriv ra0 set SSID="Adhoc's SSID"
g> Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption)
1. iwpriv ra0 set NetworkType=Adhoc
2. iwpriv ra0 set AuthMode=WPANONE
3. iwpriv ra0 set EncrypType=TKIP
4. iwpriv ra0 set SSID="AP's SSID"
5. iwpriv ra0 set WPAPSK=12345678
6. iwpriv ra0 set SSID="AP's SSID"
h> Get site survey
usage: iwpriv ra0 get_site_survey
i> Get Statistics
usage: iwpriv ra0 stat ; read statistic counter
iwpriv ra0 set ResetCounter=0 ; reset statistic counter
j> Link with an AP which is the largest strength ; set ANY SSID (ssidLen=0)
usage: iwconfig ra0 essid ""
or
usage: iwpriv ra0 set SSID=""
===================================================================
iwlist
=================
This is detailed explanation of each parameters for iwlist.
-------------------------------------------------------------------------------------------------------
iwlist ra0 scanning ; list the results after scanning(manual rescan)
=======================================================================================================
iwconfig
=================
The following are our support in standard configuration - iwconfig
-------------------------------------------------------------------------------------------------------
iwconfig ra0 essid {NN|on|off} ; set essid
iwconfig ra0 mode {managed|ad-hoc|...} ; set wireless mode
>> rt2860sta driver support monitor mode with linux kernel > 2.4.20.
iwconfig ra0 freq N.NNNN[k|M|G]] ; set frequency
iwconfig ra0 channel N ; set channel
iwconfig ra0 ap {N|off|auto} ; set AP address
iwconfig ra0 nick N ; set nickname
iwconfig ra0 rate {N|auto|fixed} ; set rate (only support legacy rate setting)
iwconfig ra0 rts {N|auto|fixed|off} ; set RTS threshold
iwconfig ra0 frag {N|auto|fixed|off} ; set Fragment threshold
iwconfig ra0 enc {NNNN-NNNN|off} ; set encryption type
iwconfig ra0 power {period N|timeout N} ; set power management modes
*** Wireless extension usage please refer to man page of 'iwconfig', 'iwlist' and 'iwpriv'. ***
Alles anzeigen
gruß pclin
Scanning
root@dm800:~# iwlist ra0 scanning
ra0 Scan completed :
Cell 01 - Address: 00:24:FE:EA:14:22
Protocol:802.11b/g
ESSID:"home"
Mode:Managed
Channel:1
Quality:100/100 Signal level:-39 dBm Noise level:-83 dBm
Encryption key:off
Bit Rates:11 Mb/s
Cell 02 - Address: 00:A1:B0:60:67:48
Protocol:802.11b/g/n
ESSID:"SoftAP-48"
Mode:Managed
Channel:1
Quality:94/100 Signal level:-53 dBm Noise level:-83 dBm
Encryption key:off
Bit Rates:150 Mb/s
Alles anzeigen
Statistic
root@dm800:~# iwpriv ra0 stat
ra0 stat:
Tx success = 1191
Tx success without retry = 1190
Tx success after retry = 1
Tx fail to Rcv ACK after retry = 0
RTS Success Rcv CTS = 0
RTS Fail Rcv CTS = 0
Rx success = 103716
Rx with CRC = 87
Rx drop due to out of resource = 0
Rx duplicate frame = 0
False CCA (one second) = 0
RSSI-A = -41
RSSI-B (if available) = -99
RSSI-C (if available) = -99
WpaSupplicantUP = 1
Alles anzeigen
gruß pclin
hallo,
hatte gerade versucht den US300 EX Lite 11n auf der dm800 zum laufen zu bringen.
(merlin im flash)
Zitatkernel-module-rt3070sta Installieren
USB-Stick einstecken
enigma2 neustarten bzw. besser neubooten !
und in Einstellungen/System/Netwerk aktivieren
alles genau nach anleitung gemacht
jedoch nach dem neustart kann ich in den netwerkeinstellungen keinen wlan adapter auswählen. (nur lan)
mein cat /proc/modules sagt auch das die module nicht geladen wurden...
root@dm800:~# cat /proc/modules
rt73 300368 1 - Live 0xc0399000
nls_utf8 1600 0 - Live 0xc00a8000
cifs 263680 0 - Live 0xc02a1000
nfsd 114816 8 - Live 0xc0205000
exportfs 4832 1 nfsd, Live 0xc0202000
ntfs 118368 0 - Live 0xc022a000
bcm7401 2901520 23 - Live 0xc043d000
cu1216mk3 8512 1 bcm7401, Live 0xc00b4000
tu1216 42032 1 bcm7401, Live 0xc00ff000
alps_bsbe2 44000 1 bcm7401, Live 0xc00f3000
alps_bsbe1 6208 1 bcm7401, Live 0xc00aa000
stv0299 11824 1 alps_bsbe1, Live 0xc0085000
dvb_core 101840 3 bcm7401,tu1216,stv0299, Live 0xc0116000
bcm4506 78304 1 bcm7401, Live 0xc00de000
alps_bsbe1_c01a 17056 1 bcm7401, Live 0xc00ae000
lnb_ctrl 5920 4 alps_bsbe2,alps_bsbe1,bcm4506,alps_bsbe1_c01a, Live 0xc0095000
dreambox_keyboard 4208 0 - Live 0xc0092000
dreambox_rc2 6432 1 dreambox_keyboard, Live 0xc008f000
ext2 50992 1 - Live 0xc00b9000
lcd 13696 1 - Live 0xc008a000
stb_core 50192 11 bcm7401,cu1216mk3,alps_bsbe2,bcm4506,alps_bsbe1_c01a,lnb_ctrl,dreambox_keyboard,dreambox_rc2,lcd, Live 0xc0098000
Alles anzeigen
gibts noch ne möglichkeit den stick ans laufen zu bekommen?
ps: zugriff zum telnet hatte ich mit nem rt73 stick
Was für eine kernel Version hat dein Image (merlin), und welches module hast du geladen ?
kannst du das module mit modprobe rt3070sta laden ?
Warum ist das rt73 module noch geladen ?
Hast du die Sticks etwa einfach nur gewechselt ?
gruß pclin
meine kernel version
ich habe "rt3070_2.1.1.0-_dm800.ipk" nach tmp geschoben und via konsole installiert. (rt73 war eingesteckt)
dreambox ausgeschalten. rt73 stick ausgesteckt. rt3070 stick eingesteckt und gebootet...
wie sehe ich welche module geladen sind?
dachte mit:
cat /proc/modules
sehe ich welche module geladen sind.
danke für deine hilfe!
zur Zeit sind 29 Mitglieder (davon 6 unsichtbar) und 1.133 Gäste online - Rekord: 5.681 Benutzer ()