hat sich erledigt
Version 0.7ht-pre22 (14.06.2013) Atmolight:(Test-Thread) 500HD/800(se)/7020HD/7025/8000 «Dual Core»
-
-
Zitat
Original von magnum1795
@ mambamöchte mich mal nach langer Zeit wieder mal melden. Habe deine letzte Version 4c
installiert auf der dm8000 und läuft auch ganz gut. Was mir aber aufgefallen ist, das die Load Average doch sehr angestiegen ist. Ist das eigentlich normal? Und was zum Teu... ist der avahi Daemon, der ja mit fast 50% zu Buche schlägt?PID PPID USER STAT VSZ %MEM CPU %CPU COMMAND
1165 1 avahi R 3252 2.1 1 48.3 avahi-daemon: running [dm8000.loc
1265 1 root R N 28140 18.4 1 33.6 /usr/sbin/atmolightd.ng -b=1 -i=7Kannst du bitte etwas dazu sagen und wie könnte ich den die Load Average wieder etwas senken? Danke dir schon mal
FYI von avahi.org
"Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. This enables you to plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared."Der avahi Daemon erzeugt bei mir eine Load zwischen 0.0 und 0.1 Prozent. Auf das Netzwerk greift der Atmolight-Daemon überhaupt nicht zu. Wenn das Konfigurations-Plugin läuft, wird per Socket mit dem Daemon kommuniziert. Das sind aber nur ein paar Bytes.
Ergo: Ich weiss es nicht. Ich habe Merlin bei mir auch nicht im Einsatz, daher kann ich es nicht testen, geschweige denn, dass ich eine DM8000 habe (aber wohl eine haben sollte).
Es kann aber auch daran liegen, dass in deinem Netz ggfs. eine Discovery erfolglos ist? Haste noch einen anderen Linux-PC im Netz? Hat dessen avahi auch eine hohe Load?
Probier mal die allerletzte 0.4c Version, die ich in den Atmolight-Thread reingehängt habe. Passiert es dann auch, probier mal die Version 0.4a. Macht die das auch?
-
Ich danke dir erst mal. Werde morgen mal die ganze Box neu aufsetzten ohne Plugins etc.. Diesmal im Flash und ohne GP3. Schaun wir mal wie es dann aussieht. Kann ja nachher das GP3 wieder installieren und die Plugins hinzufügen die ich "brauche"
Werde es dann Schrittweise kontrollieren, so das man es rauskriegen sollte wo es klemmt.
Heute mache ich aber Schluß.
Werde morgen Abend nochmal was dazu schreiben
PS: meinste diese version von hier:Atmolight: (Test-Thread) !JETZT MIT DUAL CORE SUPPORT! 500HD/800/800se/7025/8000
-
Ja, genau. Die Version ist die letzte.
-
Zitat
Original von mamba0815
Ja, genau. Die Version ist die letzte.gut, dann werde ich das Morgen mal testen. So das war es für heute, muß Morgen früh sehr zeitig raus
-
so kurze Rückmeldung:
habe heute komplett neuinstalliert (Merlin vom 30.07.2011) dann meine Plugins wieder installiert (noch ohne GP3) und die version vom Atmo 0.4c .
So sieht es jetzt bei top ausPID PPID USER STAT VSZ %MEM CPU %CPU COMMAND
2551 1 root R N 40432 26.5 0 38.9 /usr/sbin/atmolightd.ng -b=1 -k=1
2546 1 root S N 40432 26.5 0 10.5 /usr/sbin/atmolightd.ng -b=1 -k=1das avhai ist jetzt nicht mehr zu sehen. Denke das die Werte fürs Atmo ok sind, Oder?
load avagae ist jetzt wieder bei 1.1 bis 1.3 Denke also das es so ok ist. Nun wieder das GP3 installiert (wegen der guten avancedmovielist) und es ist alles so geblieben mit den load avage.
Keine Ahnung was Gestern los war , sind jetzt die selben Plugins etc. drauf, einziger Unterschied ist jetzt das das Image im flash ist und nicht auf den LOWFAT Stick.
-
Ja, so ist das in Ordnung.
Der Atmolight-Thread mit 38.9% CPU ist der Grabber und der andere mit 10.5 % der ColorCalc.
Mamba
-
-
hallo mamba
hast du das schon gesehen http://www.dreambox-blog.com/i…uf-dem-fernseher-und-oled
wir haben doch mal über musiksteuerung gesprochen, könnte uns das dabei helfen?
gruss
-
Hmmm .... stimmt. Ich spreche ihn mal an ...
-
Wir hatten eben den 150.000sten Click im Thread.
Unglaublich.
-
Wie kann ich die Prozessprio vom Atmolight checken? Seit kurzem harkt meine Box wenn ich das Atmomlight an habe ...
-
Welches Image hast du drauf und welche Version des Plugins?
Atmolight ist darauf angewiesen, dass "pidof" und "renice" vom Image unterstützt werden. Das ist praktisch auf allen Images der Fall.
Such dir mal die Prozess-IDs von Atmolight und versuche "renice 19 <id>",
z.B.
Mamba
-
Kann auch ausgelesen werden unter welcher Prio die Prozesse aktuell laufen? ps und top geben das scheinbar nicht aus.
-
Das renice der busybox scheint kein Verbose zu haben....
-
-
Dear Mamba
I would like to ask you to implement a timer for the plugin to go on and to go off (something like what yo did for the light in standby, but for when the receiver is on) as it is annoying to have to manually turn off the pluging during the day and turn it back on at night.
Thanks man
PS: apologies German speakers for hijacking your thread, i wish i could speak it.
-
Zitat
Original von mmthabet
Dear MambaI would like to ask you to implement a timer for the plugin to go on and to go off (something like what yo did for the light in standby, but for when the receiver is on) as it is annoying to have to manually turn off the pluging during the day and turn it back on at night.
Thanks man
PS: apologies German speakers for hijacking your thread, i wish i could speak it.
Hi,
no need to apologize. All good.
I have that request on my list. I am pretty busy @ work right now, so it might take some time. If you want, you can add a two cronjob that stops and starts Atmolight by calling
at a certain time.
Mamba
-
Zitat
Original von mamba0815
I have that request on my list. I am pretty busy @ work right now, so it might take some time. If you want, you can add a two cronjob that stops and starts Atmolight by calling[code]/etc/init.d/atmolight stop
or
/etc/init.d/atmolight start[code]at a certain time.Mamba
As another suggestion to make this easier to access: Why not implement a signal-handler into the daemon which stops/resumes output with teh SIGUSR1 and SIGUSR2 signals? -