dreamboxEDIT 7.2.1.0 [Support/Download]

  • Zitat

    Original von Homerius
    Gibt es auch die 4er Version bald für den MAC ? oder ist da zur Zeit die 3er Version das aktuellste ?


    Danke schon mal


    Homerius


    Sorry, aber es gab noch nie eine Version für den Mac, wenn das einer hingefrickelt hat sich das nicht mein Problem. Musst du dir leider den passenden Thread suchen und dort fragen. :winking_face:

    Ein kleines Dankeschön, durch eine Spende, nehme ich gerne an, PayPal oder Amazon-Gutschein an dhwz(at)gmx.net

  • Naja im Datebase bereich gibt es ja eine ist zwar nur ne BEta aber die funzt sehr gut.


    Aber danke dann weiß ich bescheid!

    Baust 'nen Turbo in den Diesel, läuft der Diesel wie ein Weasel ...

  • Hi,


    I have an problem with DreamBoxEdit-IHAD v4.0.1.0.
    When I edit and save Enigma1 Bouquet, next time I open it, I have this error message ""A" ist kein gültiger Integerwert für Feld 'altServeType'".
    When I try to upload this saved Bouquet to my Dreambox DM500S they crash and all chanels on DM500S is removed.
    For my Dreambox DM800HD with Enigma2 Bouquet it work very good.
    Where is the problem with Enigma1 Bouquets?
    I have this problem from september 2010.


    Please help.


    Thanks.


    Regards,
    Elvis

  • Zitat

    Original von Andrija M
    dhwz, "a" ist kein gültiger Integerwert für Feld 'altServeType'" is not yet fixed. When I try to open Don@ motor list (which is also avaliable trough blue panel) i still got same error


    This is not altServType thats frdServType and your Settings are broken. :winking_face:


    This happend when the settings were converted from Enigma2 to Enigma1. Enigma2 stores Servicetypes in HEX Format and Enigma1 in DEC. But this is not a problem of Dreamboxedit.


    Don@ doesn't release E1-Settings, so someone else converted them with a broken Settings-Editor. :winking_face:

    Ein kleines Dankeschön, durch eine Spende, nehme ich gerne an, PayPal oder Amazon-Gutschein an dhwz(at)gmx.net

    Einmal editiert, zuletzt von dhwz ()

  • Zitat

    Original von Andrija M
    No, it is Don@ genuine E1 settings posted on his home board (and also avaliable trough BP) http://www.novisf.com/wbb3/dig…e-kanala-za-dreambox-don/



    And you are right: this settings is converted from E2. But DreamSet has no problem with this list ?


    Ok your are right, Don@ converted them with Dreamset, so the problem is Dreamset. It doesn't convert the servicetype from HEX to DEC when you saving E2 Settings in E1 Format. Bug!!! :tongue:


    I've verified this problem, if I convert the settings with Dreamset from E2 -> E1, I get the frdServType error with Dreamboxedit, too.


    If I do a proper conversion with Dreamboxedit the problem is gone. :winking_face: :hurra:


    PS:
    Maybe Don@ should use DreamBoxEdit. :hurra:

    Ein kleines Dankeschön, durch eine Spende, nehme ich gerne an, PayPal oder Amazon-Gutschein an dhwz(at)gmx.net

    6 Mal editiert, zuletzt von dhwz ()

  • Zitat

    Original von dhwzPS:Maybe Don@ should use DreamBoxEdit. :hurra:


    Yes, I tell this to Don@ few times but he is very dogged man :499: Truth is that in the begining he use DreamBoxEdit as his favourite editor but later he change to DreamSet because lack of support for subtitles in DBE...

  • I use DreamBoxEdit.
    I worked with converting from E2 to E1.
    Due to an error, the last list I work exclusively with DM500s Receiver.


    After converting the list of all the western satellites does not show as an example, 0.8 W, but that satellite is shown as 359.2 E. Same for all the satellites to the west. Because i have a lot of them complained to the error. I decided to do a separate list for the E1 with DM500s and E2 work with DM800. Working separately scan.

  • Zitat

    Original von ciefp
    satellites does not show as an example 0.8 W, but that satellite is shown as 359.2 E


    It is simple: 360 - 359.2E = 0.8W :winking_face:

    • Offizieller Beitrag
    Zitat

    Original von Andrija M
    It is simple: 360 - 359.2E = 0.8E :winking_face:


    THOR 2,3 (359.2E - 0.8W) Sorry.


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert

  • Der Fehler schaut auch überhaupt nicht so aus als ob Dreamboxedit daran schuld sein könnte. Das liegt wohl eher am verwendeten Image.

    Ein kleines Dankeschön, durch eine Spende, nehme ich gerne an, PayPal oder Amazon-Gutschein an dhwz(at)gmx.net

    • Offizieller Beitrag

    vom image nicht einmal, aber eher vom Skin sebst das dies so anzeigen soll.


    Im "Service" oder "satellites.xml" ist, wenn westlich sein soll, alles mit ne minus (-) zeichen kommentiert.


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert

  • Hallo
    auch ich habe ein Problem


    Ich habe eine neue 800se und einen kompletten Suchlauf gemacht. Aber leider werden beim Import der Daten in DreamboxEdit alle Sender als Data gekennzeichnet und nicht wie normal als Radio und Tv. Das macht die Arbeit recht schwer. Ist das ein Bug oder was muss ich beachten , dass es klappt .. ?

  • Hallo zusammen,


    es gibt da ein kleines Problem mit der Darstellung von Profile Namen.
    Die werden ab einer gewissen Länge einfach eingekürzt mit ... am Ende dargestellt, obwohl die Anzahl Zeichen die gleich ist wie andere.


    Ich habe mal einen Screenshot angehängt.


    Der Name der ... ist eigentlich
    DBLPL02-8000-WZ
    und
    DBLPL05-7000-WS
    Also genau so lang wie die anderen.


    Vielleicht gibt es da ja eine Lösung.

  • Hallo zusammen,


    ich habe einige Profile (über 30), da ich auch die ganze Familie betreue.
    Natürlich sind im Laufe der Zeit immer wieder neue Boxen dazugekommen.
    Die sind natürlich hintereinander abgelegt.
    Es ist schade das ich die nicht sortieren kann.
    Und alle Parameter in der Registry neu zu sortieren ist einfach mühsam.


    Im Moment setze ich das ganze einfach mal neu auf.


    Als Vorschlag für zukünftige Versionen.
    Eine bessere Verwaltung, oder zumindest sortierte Darstellung der Profile.


    Vielen Dank im voraus.


    dhwz: Vielen Dank für die super Weiterentwicklung des DreamboxEdit.

    1X DM7020S__1X DM800-se__1X DM8000_1X Marusys-VU+DUO
    1500GB______1000GB_______1500GB____1500GB
    PB-VX________NeXnigma2___GP________VTI

    Einmal editiert, zuletzt von klausi99 ()