[im Test]Frisch gebacken für OE1.6

root@dm800:/tmp/new# ipkg info espgs     
Package: espgs
Version: 8.15.3-r1
Depends: libjpeg62 (>= 6b), libpng12-0 (>= 1.2.42), libz1 (>= 1.2.3), libcupsimage (>= 1.2.12), libcups2 (>= 1.2.12), libgnutls26 (>= 2.4.2), libgcrypt11 (>= 1.4.4), libgpg-error0 (>= 1.4), libc6 (>= 2.10), libfontconfig1 (>= 2.6.0)
Provides:
Status: install user installed
Architecture: mipsel
Installed-Time: 946686116


root@dm800:/tmp/new# ipkg info espgs-resources
Package: espgs-resources
Version: 8.15.3-r1
Provides:
Status: install user installed
Architecture: mipsel
Installed-Time: 946686036


root@dm800:/tmp/new# ipkg info espgs-examples 
Package: espgs-examples
Version: 8.15.3-r1
Provides:
Status: install user installed
Architecture: mipsel
Installed-Time: 946686018

root@dm800:/tmp/hp# ipkg info hplip
Package: hplip
Version: 2.8.10-r1
Depends: libjpeg62 (>= 6b), libc6 (>= 2.10), libusb-0.1-4 (>= 0.1.2), libusb-1.0-0 (>= 1.0.4), libstdc++6 (>= 4.4.3), libgcc1 (>= 4.4.3)
Provides:
Status: install user installed
Architecture: mipsel
Installed-Time: 1290359616


root@dm800:/tmp/hp# ipkg info hplip-backend                
Package: hplip-backend
Version: 2.8.10-r1
Depends: hplip (>= 2.8.10), libusb-0.1-4 (>= 0.1.2), libusb-1.0-0 (>= 1.0.4), libc6 (>= 2.10)
Provides:
Status: install user installed
Architecture: mipsel
Installed-Time: 1290359618


root@dm800:/tmp/hp# ipkg info hplip-ppd                    
Package: hplip-ppd
Version: 2.8.10-r1
Provides:
Status: install user installed
Architecture: mipsel
Installed-Time: 1290359645

============================
Install prefix        /usr
CFLAGS                -g -O2
trace                 no
backtracing           no
sendfile()            yes
IPv6 support          yes
Polling method 1      epoll
Polling method 2      poll
Polling method 3      select
Threading support     yes
OpenSSL support       yes
PCRE library          yes
Compatible PAM        yes
Python                yes
LDAP                  yes
MySQL                 yes
GeoIP                 no
FFMpeg                yes
crypt support         multithread


Installation dir /usr/bin
============================


Warning: You have an old copy of Cherokee at /usr/sbin/cherokee.


+------------------------------------------------------------------+
| License:                                                         |
| This software is subject to the GPL License, available in this   |
| distribution in the file COPYING. Please, remember that any copy |
| distribution or modification of the software is subject to it.   |
+------------------------------------------------------------------+


Thank you for using Cherokee.

root@dm800:/tmp/gst-dev# ls -la /usr/local/bin
insgesamt 4704
drwxr-xr-x 2 root root    4096 27. Nov 02:41 .
drwxr-xr-x 9 root root    4096 27. Nov 02:29 ..
-rwxr-xr-x 1 root root 1632888 26. Nov 21:52 bluefish
-rwxr-xr-x 1 root root   31360 27. Nov 02:41 cget
-rwxr-xr-x 1 root root    1221 27. Nov 02:28 cherokee-config
-rwxr-xr-x 1 root root    3912 27. Nov 02:32 cherokee-panic
-rwxr-xr-x 1 root root   10206 27. Nov 02:32 cherokee-tweak
-rwxr-xr-x 1 root root   15456 26. Nov 13:52 cisco-decrypt
-rwxr-xr-x 1 root root    7338 26. Nov 10:35 clish
-rwxr-xr-x 1 root root   18182 25. Nov 23:35 config.charset
-rwxr-xr-x 1 root root  218100 25. Nov 23:24 directvnc
-rwxr-xr-x 1 root root  213857 25. Nov 15:30 feh
-rwxr-xr-x 1 root root    4882 25. Nov 15:30 feh-cam
-rwxr-xr-x 1 root root    2107 25. Nov 15:30 gen-cam-menu
-rwxr-xr-x 1 root root 1561657 26. Nov 00:35 gftp-gtk
-rwxr-xr-x 1 root root     291 25. Nov 23:35 gftp.in
-rwxr-xr-x 1 root root  964369 26. Nov 00:07 gftp-text
-rwxr-xr-x 1 root root    3557 14. Nov 23:14 meld
-rwxr-xr-x 1 root root    1762 25. Nov 23:35 parse-netrc.pl
-rwxr-xr-x 1 root root    3902 26. Nov 13:52 pcf2vpnc
-rwxr-xr-x 1 root root    6534 26. Nov 10:35 tclish
-rwxr-xr-x 1 root root     685 25. Nov 23:24 xmapconv

root@dm800:/tmp/new# gnash --help
Gnash 0.8.5


Copyright (C) 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
Gnash comes with NO WARRANTY, to the extent permitted by law.
You may redistribute copies of Gnash under the terms of the GNU General
Public License.  For more information, see the file named COPYING.


Verwendung: gnash [Optionen] datei.swf


Wiedergabe einer SWF-Datei
Optionen:


  -h,  --help              Diese Hilfe anzeigen und beenden
  -V,  --version           Versionsnummern anzeigen und beenden
  -s,  --scale <Faktor>    Film um den angegebenen Faktor skalieren
  -c                       Produce a core file instead of letting SDL trap it
  -d,  --delay num         Wartezeit in der Hauptschleife in Millisekunden
  -v,  --verbose           Ausführlicher Modus
  -va                      (Sehr) ausführlicher Modus für Film-Aktionen
  -vp                      (Sehr) ausführlicher Modus für Film-Parsing
  -A <file>                Audio dump file (wave format)
  -D <file>                Video dump file (only valid with dump-gnash)
  -x,  --xid <ID>          X11 Window ID for display
  -w,  --writelog          Produce the disk based debug log
  -j,  --width <Breite>    Fensterbreite setzen
  -k,  --height <Höhe>     Fensterhöhe setzen
  -1,  --once              Exit when/if movie reaches the last frame
  -g,  --debugger          SWF-Debugger einschalten
  -r,  --render-mode <0|1|2|3>
                           0 Rendering und Audio deaktiviert
                           1 Rendering aktiviert, Audio deaktiviert
                           2 Audio aktiviert, Rendering deaktiviert
                           3 Rendering und Audio aktiviert (Standard)
  -t,  --timeout <sec>     Exit after the specified number of seconds
  -u,  --real-url <url>    Set "real" URL of the movie
  -U,  --base-url <url>    Set "base" URL for resolving relative URLs
  -P,  --param <param>     Set parameter (e.g. "FlashVars=A=1&b=2")
  -F,  --fd <fd>           Filedescriptor to use for external communications


  --max-advances num       Exit after specified number of advances
  --fullscreen             Start in fullscreen mode
  --hide-menubar           Start without displaying the menu bar 


Keys:


  CTRL-Q, CTRL-W           Quit/Exit
  CTRL-P                   Toggle Pause
  CTRL-R                   Film neu starten
  CTRL-L                   Sofortige Neuzeichnung erzwingen

root@dm800:/home/pclin# proftpd -V
Compile-time Settings:
  Version: 1.3.3c (maint)
  Platform: LINUX [Linux 2.6.18-7.4-dm800 7401c0]
  Built: Di Dez 14 2010 22:36:21 CET
  Built With:
    configure  '--build=mipsel-oe-linux' '--host=mipsel-oe-linux' '--prefix=/usr' '--enable-builtin-getaddrinfo' '--enable-builtin-getnameinfo' '--enable-ctrls' '--enable-openssl' '--enable-autoshadow' '--enable-dso' '--enable-nls' '--enable-facl' 'build_alias=mipsel-oe-linux' 'host_alias=mipsel-oe-linux'


  CFLAGS: -O2 -Wall
  LDFLAGS: -L$(top_srcdir)/lib  
  LIBS:  -lssl -lcrypto -lcap  -lpam -lsupp -lcrypt -ldl  -liconv


  Files:
    Configuration File:
      /usr/etc/proftpd.conf
    Pid File:
      /usr/var/proftpd.pid
    Scoreboard File:
      /usr/var/proftpd.scoreboard
    Header Directory:
      /usr/include/proftpd
    Shared Module Directory:
      /usr/libexec


  Features:
    + Autoshadow support
    + Controls support
    + curses support
    - Developer support
    + DSO support
    + IPv6 support
    + Largefile support
    - Lastlog support
    + ncurses support
    + NLS support
    + OpenSSL support
    + POSIX ACL support
    + Shadow file support
    + Sendfile support
    + Trace support


  Tunable Options:
    PR_TUNABLE_BUFFER_SIZE = 1024
    PR_TUNABLE_GLOBBING_MAX_MATCHES = 100000
    PR_TUNABLE_GLOBBING_MAX_RECURSION = 8
    PR_TUNABLE_HASH_TABLE_SIZE = 40
    PR_TUNABLE_NEW_POOL_SIZE = 512
    PR_TUNABLE_SCOREBOARD_BUFFER_SIZE = 80
    PR_TUNABLE_SCOREBOARD_SCRUB_TIMER = 30
    PR_TUNABLE_SELECT_TIMEOUT = 30
    PR_TUNABLE_TIMEOUTIDENT = 10
    PR_TUNABLE_TIMEOUTIDLE = 600
    PR_TUNABLE_TIMEOUTLINGER = 30
    PR_TUNABLE_TIMEOUTLOGIN = 300
    PR_TUNABLE_TIMEOUTNOXFER = 300
    PR_TUNABLE_TIMEOUTSTALLED = 3600
    PR_TUNABLE_XFER_SCOREBOARD_UPDATES = 10


root@dm800:/home/pclin# proftpd -l
Compiled-in modules:
  mod_core.c
  mod_xfer.c
  mod_auth_unix.c
  mod_auth_file.c
  mod_auth.c
  mod_ls.c
  mod_log.c
  mod_site.c
  mod_delay.c
  mod_facts.c
  mod_dso.c
  mod_ident.c
  mod_auth_pam.c
  mod_cap.c
  mod_ctrls.c
  mod_lang.c

root@dm800:/media/ba/compile/iguanaIR-1.0.1# make install
mipsel-oe-linux-gcc -march=mips32 -c  -Wall -pedantic -Wextra -O2 -fpic -I. -fvisibility=hidden -DIGUANAIR_EXPORTS client.c -o client.o
mipsel-oe-linux-gcc -march=mips32 -c  -Wall -pedantic -Wextra -O2 -fpic -I. -fvisibility=hidden -DIGUANAIR_EXPORTS list.c -o list.o
mipsel-oe-linux-gcc -march=mips32 -c  -Wall -pedantic -Wextra -O2 -fpic -I. -fvisibility=hidden -DIGUANAIR_EXPORTS support.c -o support.o
mipsel-oe-linux-gcc -march=mips32 -shared -Wl,-soname=libiguanaIR.so.0,--version-script=./ig.ver  iguanaIR.o support.o dataPackets.o compat-unix.o pipes.o -o libiguanaIR.so.0
mipsel-oe-linux-gcc -march=mips32  client.o list.o support.o compat-unix.o libiguanaIR.so.0 -lpopt libiguanaIR.so.0 -o igclient
mipsel-oe-linux-gcc -march=mips32 -Wl,-export-dynamic  -Wall -pedantic -Wextra -O2 -fpic -I. -fvisibility=hidden -DIGUANAIR_EXPORTS -DSUPPORT_EXPORTS \
               daemon.o server.o client-interface.o device-interface.o driver.o list.o protocol-versions.o pipes.o dataPackets.o compat-unix.o support.c libiguanaIR.so.0 -lpopt -lusb -lpthread -ldl libiguanaIR.so.0 -o igdaemon
make -C ./drivers prefix=/usr
make[1]: Entering directory `/media/ba/compile/iguanaIR-1.0.1/drivers'
mipsel-oe-linux-gcc -march=mips32  -Wall -pedantic -Wextra -O2 -fpic -shared  -lusb libusbpre1.c \
                ../list.o -o libusbpre1.so
mipsel-oe-linux-gcc -march=mips32  -Wall -pedantic -Wextra -O2 -fpic -shared  -lusb-1.0 libusb.c \
                ../list.o -o libusb.so
make[1]: Leaving directory `/media/ba/compile/iguanaIR-1.0.1/drivers'
/usr/sbin/useradd -u 213 -c "Iguanaworks IR Daemon" -d / -s /sbin/nologin iguanair 2>/dev/null || true
install -d //usr/lib
rm -f //usr/lib/libiguanaIR.so
ln -s libiguanaIR.so.0 //usr/lib/libiguanaIR.so
install -d //usr/bin
install igclient //usr/bin/igclient
install igdaemon //usr/bin/igdaemon
install -d //usr/lib/iguanaIR
install libiguanaIR.so.0 //usr/lib/libiguanaIR.so.0
install drivers/libusbpre1.so //usr/lib/iguanaIR/libusbpre1.so
install drivers/libusb.so //usr/lib/iguanaIR/libusb.so
install -d /usr/include
install ./iguanaIR.h /usr/include/iguanaIR.h
install -D ./iguanaIR.init /etc/init.d/iguanaIR
install -D --mode 644 ./iguanaIR.options /etc/default/iguanaIR
install -D --mode 644 ./udev/iguanaIR.rules \
                              /lib/udev/rules.d/80-iguanaIR.rules
install --mode 755 --owner iguanair --group iguanair -d /lib/udev/devices/iguanaIR
install --mode 755 --owner iguanair --group iguanair -d /dev/iguanaIR

Usage: igdaemon [OPTION...]
  -l, --log-file=filename               Specify a log file (defaults to "-").
  -q, --quiet                           Reduce the verbosity.
  -v, --verbose                         Increase the verbosity.
      --log-level=INT                   Set the verbosity.
  -n, --no-daemon                       Do not fork into the background.
  -p, --pid-file=filename               Specify where to write the pid of the daemon process.
      --no-ids                          Do not query the iguanaworks device for its label.  Try this if fetching the label hangs.
      --no-labels                       DEPRECATED: same as --no-ids
      --receive-timeout=timeout         Specify the device receive timeout.
      --send-timeout=timeout            Specify the device send timeout.
      --no-threads                      Do not allow two threads to both access libusb calls at the same time.  Try this if the device
                                        occasionally crashes.
  -d, --driver=preferred driver         Use this driver in preference to others.  This command can be used multiple times.
      --only-preferred                  Use only drivers specified by the --driver option.
      --driver-dir=driver directory     Specify the location of driver objects.


Help options:
  -?, --help                            Show this help message
      --usage                           Display brief usage message
root@dm800:/media/ba/compile/iguanaIR-1.0.1# igclient --help
Usage: igclient [OPTION...]
  -d, --device=number                Specify the device to connect with (by index or id).
      --interactive                  Use the client interactively.
  -l, --log-file=filename            Specify a log file (defaults to "-").
  -q, --quiet                        Reduce the verbosity.
  -v, --verbose                      Increase the verbosity.
      --log-level=INT                Set the verbosity.
      --get-version                  Return the version of the device firmware.
      --get-features                 Return the features associated w/ this device.
      --send=filename                Send the pulses and spaces from a file.
      --resend=microsecond delay     Send the pulses and spaces already in the device buffer after a delay
      --receiver-on                  Enable the receiver on the usb device.
      --receiver-off                 Disable the receiver on the usb device.
      --get-pins                     Get the pin values.
      --set-pins=values              Set the pin values.
      --get-buffer-size              Find out the size of the RAM buffer used for sends and receives.
      --write-block=filename         Write the block specified in the file.
      --execute                      Execute code starting at address 0x1fc0 on the device.
      --lcd-text=string              Send a bulk transfer of pin settings to write the argument to an LCD.
      --reset                        Reset the USB device.
      --get-channels                 Check which channels are used during transmits.
      --set-channels=channels        Set which channels are used during transmits.
      --get-carrier                  Check the carrier frequency for transmits.
      --set-carrier=carrier (Hz)     Set the carrier frequency for transmits.
      --get-pin-config               Retrieve the internal pin state.
      --set-pin-config               Store the internal pin state.
      --get-output-pins              Check which pins are set to be outputs.
      --set-output-pins=pins         Set which pins should be outputs.
      --get-pullup-pins              Check which pins are set to be pullups.
      --set-pullup-pins=pins         Set which pins should be pullups.
      --get-open-drain-pins          Check which pins are set to be open drains.
      --set-open-drain-pins=pins     Set which pins should be open drains.
      --get-high-sink-pins           Check which pins are set to be high sinks.
      --set-high-sink-pins=pins      Set which pins should be high sinks.
      --get-threshold-pins           Check which pins are set to be thresholds.
      --set-threshold-pins=pins      Set which pins should be thresholds.
      --sleep=seconds                Sleep for X seconds.
      --get-id                       Fetch the unique id from the USB device.
      --set-id=STRING                Set the unique id from the USB device.
      --get-location                 Fetch the bus and device indices for the USB device.
      --repeater-on                  Put the device into a mode that repeats signals.


Help options:
  -?, --help                         Show this help message
      --usage                        Display brief usage message

python setup.py install
starten mit
root@dm800:~# ipython -p sh
/usr/lib/python2.6/site-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
  warnings.warn(str(e), _gtk.Warning)
IPython 0.10.1   [on Py 2.6.4]
[~]|1> ls
Audio/         dead.letter  enigma2-plugin-extensions-barryallen_5.1.48_mipsel.ipk  Mail/                    startup.conf
ba.sh@         Desktop/     gemini-beta-feed.conf.tar.gz                            release-dm800-3.0.1.nfi  user_startup*
Bilder/        Dokumente/   Incomming/                                              Screenshot.png           Xmodmap.mint
btscanner.log  Downloads/   libdvdcss-1.2.9.tar.bz2                                 shoutcast.list           x-window-manager@
[~]|2>

root@dm800:~# fbxine --help
Usage: fbxine [options] <MRL> ...


  -v, --version                  Display version.
      --verbose [=level]         Set verbosity level. Default is 1.
  -V, --video-driver <drv>       Select video driver:
                                   'aadxr3'
                                   'dxr3'
                                   'xv'
                                   'XDirectFB'
                                   'DirectFB'
                                   'SyncFB'
                                   'opengl'
                                   'raw'
                                   'xshm'
                                   'caca'
                                   'none'
                                   'xxmc'
                                   'sdl'
                                   'fb'
                                   'xvmc'


  -A, --audio-driver <drv>       Select audio driver:
                                    'pulseaudio'
                                    'alsa'
                                    'oss'
                                    'jack'
                                    'esd'
                                    'file'
                                    'none'


  -a, --audio-channel <number>   Select audio channel.
  -D, --deinterlace              Deinterlace video output. One or more post plugin
                                 can be specified, with optional parameters.
                                 Syntax is the same as --post option.
      --stdctl                   Turn on controlling xine over STDIN.
      --post <plugin>[:parameter=value][,...]
                                 Load a post plugin.
                                 Parameters are comma separated.
                                 This option can be used more than one time.
  -d, --debug                    Print debug messages.


Examples of valid MRL:s (media resource locators):
  File:  'path/foo.vob'
         '/path/foo.vob'
         'file://path/foo.vob'
         'fifo://[[mpeg1|mpeg2]:/]path/foo'
         'stdin://[mpeg1|mpeg2]' or '-' (mpeg2 only)
  DVD:   'dvd://VTS_01_2.VOB'
  VCD:   'vcd://<track number>'


fbxine 0.99.6 is a frame buffer interface for the xine library.
Built with xine library 1.1.16. Found xine library version: 1.1.16.

Install path ............ /usr
  CPU Optimization ........ generic_fpu
  Compiler Optimization ... 2
  Gapless Support ......... enabled
  Debugging ............... disabled
  Seek table size ......... 1000
  FIFO support ............ enabled
  Buffer .................. enabled
  Network (http streams) .. enabled
  Network Sockets ......... Posix
  IPv6 (getaddrinfo) ...... enabled
  File offsets ............ default
  LFS alias symbols ....... enabled (32)
  Alignment checks ........ 


  Core libmpg123 features:
  Integer conversion ...... fast
  Layer I ................. enabled
  Layer II ................ enabled
  Layer III ............... enabled
  NtoM resampling ......... enabled
  downsampled decoding .... enabled
  Feeder/buffered input ... enabled
  ID3v2 parsing ........... enabled
  String API .............. enabled
  ICY parsing/conversion .. enabled
  Error/warning messages .. enabled
  Win32 Unicode File Open.. unneeded
  Feature Report Function.. enabled
  Output formats (nofpu will disable all but 16 or 8 bit!):
  8 bit integer ........... enabled
  16 bit integer .......... enabled
  32/24 bit integer ....... enabled
  real (32 bit float) ..... enabled


  Modules ................. enabled
  Module suffix ........... .la
  Checked audio modules ... alsa oss coreaudio sndio sun win32 os2 esd jack portaudio pulse sdl nas arts openal dummy
  Detected audio support .. alsa oss esd jack portaudio pulse sdl nas openal dummy
  Default output module ... alsa

root@dm800:/home/pclin# fbxine -V DirectFB -A alsa http://tagesschau.vo.llnwd.net/d3/video/2010/0921/TV-20100921-0258-0701.webl.h264.mp4
(*) DirectFB/Core: Single Application Core. (2010-12-12 10:49) 
(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <1048576>...
(*) DirectFB/FBDev: Found 'bcmfb' (ID 0) with frame buffer at 0x0effc000, 16384k (MMIO 0x00000000, 0k)
(*) Direct/Modules: suppress module 'linux_input'
(*) Direct/Modules: suppress module 'keyboard'
(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <1048576>...
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)
(*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) FBDev/Mode: Setting 1280x800 RGB16
(*) FBDev/Mode: Switched to 1280x800 (virtual 1280x800) at 16 bit (RGB16), pitch 2560
(*) FBDev/Mode: Setting 1280x800 RGB16
(*) FBDev/Mode: Switched to 1280x800 (virtual 1280x1600) at 16 bit (RGB16), pitch 2560
params.c:OpenConfFile() - Unable to open configuration file "/home/root/.smb/smb.conf.append":
        No such file or directory
Using netbios name DM800.
Using workgroup WORKGROUP.