Barry Allen 5.2 Test und Entwicklungsthread - currently closed

  • Ich habe schon probiert die logos und die Übersetzungen in eigene ipks auszulagern, aber irgendwie wollte das keiner so richtig für mich machen, also ist es halt in der Zwischenzeit ein bischen grösser.


    Nachdem die ganzen 7MB aber eh zu 99% auf dem BA device liegen ist das doch eh ziemlich egal.


    LG
    gutemine

  • Konnte ich mir irgendwie nicht verkneifen.
    Ich hab nen 8 GB Stick, da haben wir noch etwas Luft... :)

  • Hoi .
    Was loos hier.


    OpenDreambox 1.6.0 dm8000


    dm8000 login: root
    root@dm8000:~# cd /
    root@dm8000:/# ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
    Installing enigma2-plugin-extensions-barryallen (5.1.5) to root...
    ================================================================
    It's a Dream !
    ================================================================
    dm8000
    ================================================================
    secondstage loader OK
    ================================================================
    now checking Kernel of Image in Flash
    ================================================================
    Barry Allen stops automount, reboot after installation to get it back
    Barry Allen stops udev, reboot after installation to get it back
    Barry Allen already installed, no Format needed
    You can relax now !
    Configuring enigma2-plugin-extensions-barryallen
    Integrating Barry Allen into Flash Image
    /MB_Images will be created on /media/hdd/MB_Images
    Integrating Barry Allen into WebIF
    Flash Kernel Version: 2.6.18-7.1-dm8000
    Barry Allen feels home at /dev/mtdblock/4
    disabled keep squashfs
    bapostinst is disabled - enable with the Barry Allen Plugin if wanted
    Restarting enigma to get Barry Allen V5.1.5 into Plugin List
    second Image in Flash of 8000 is already disabled
    --------------------------------------------------------------
    Installation or Upgrade of Barry Allen is now finished !
    If this is a new installation, then please reboot NOW
    to check if Barry Allen Plugin shows up in the Plugin List !
    --------------------------------------------------------------
    PS: You can ignore any file_move or Can't open status file
    errors after this, they don't hurt
    --------------------------------------------------------------
    root@dm8000:/#

  • so, habe es heute endlich geschafft, ba auf der 500hd zu installieren. angeschlossen ist ein esata-stick.




    und das update auf 5.1.5:


    mfg


    OoZooN


    .................................................................


    :403: Two Beer or not two Beer, that's the Question :408:


    aktuelle Nachrichten rund um OoZooN-Images gibt es auf Twitter

    Einmal editiert, zuletzt von OoZooN ()

  • bekomme allerdings keinen bootmanager zu gesicht :frowning_face:


    imageauswahl über das ba menü geht.

    mfg


    OoZooN


    .................................................................


    :403: Two Beer or not two Beer, that's the Question :408:


    aktuelle Nachrichten rund um OoZooN-Images gibt es auf Twitter

    Einmal editiert, zuletzt von OoZooN ()

  • Eines nach dem Anderen & Danke fürs Testen.


    Der Bootmanager ist ja noch nicht auf die 500HD angepasst, poste mir bitte mal den Inhalt vom /media/ba/.balog der 500HD


    LG
    gutemine

    2 Mal editiert, zuletzt von gutemine ()

  • Mal was anderes, ich würde gerne auch die Boxerkennung in den 1.6er Image vereinfachen, könnt Ihr mich nachschauen ob wenn ein 1.5 oder 1.6 Image im Flash ist bei aktuellen Images folgende Ausgabe IMMER richtig den Boxtyp ausgibt:


    cat /proc/stb/info/model
    dm8000 <---- bei mir :)


    also dm800, dm7025 dm500HD,...


    Weil /proc/cpuinfo ist einfach nicht mehr eindeutig genug und es kostet zu viel code die Sonderfälle zu handhaben.


    LG
    gutemine

    Einmal editiert, zuletzt von gutemine ()

  • OoZooN 1.5:

    Code
    root@dm800:~# cat /proc/stb/info/model
    dm800


    Code
    root@dm7025:~# cat /proc/stb/info/model 
    dm7025


    Panasonic TX50-EXW784
    Panasonic SC-ALL70TEGK / SC-ALL2 wireless 5.1 Soundbar
    dm8000, dm7080, dm800sev2, dm900-dvb-s2-unicable, dm900-dvb-s2-multisat


    http://www.dreambox-tools.info

    Einmal editiert, zuletzt von Oldboke ()

  • tested 5.1.5 on dm800
    usb stick 8G




    it realised the stick (/dev/sda1) as hdd
    when I rebooted the box , I didn't get the "bootmanager"
    the flash img booted directly , but without the appearance of bootlogo




    .

  • BA is now on HDD (as it said ... will be never formatted). Deinstall BA and try again

  • Zitat

    Original von Oldboke
    OoZooN 1.5:

    Code
    root@dm800:~# cat /proc/stb/info/model
    dm800


    Code
    root@dm7025:~# cat /proc/stb/info/model 
    dm7025


    Leider steht dort auf der VU+ immer noch dm8000


    Egal, dann halt andersrum, in den OE 1.6 images, steht da bei cat /proc/cpuinfo beim build target auf der 800er und der 500hd schon die richtige Box ?

    Einmal editiert, zuletzt von gutemine ()

  • Mit der Image (opendreambox-1.6) ist BA insterliert und die vorhandenen images fnkitonieren gut, nur beim booten von BA kan ich die ferschiedenen imades nicht auswählen!
    Ansonst ist alles was du an (cat /proc/cpuinfo) ist in der 1.6 da wo es hingehört .


    OpenDreambox 1.6.0 dm800


    dm800 login: root
    root@dm800:~# cat /proc/cpuinfo
    system type : BCM97xxx Settop Platform
    build target : dm800
    processor : 0
    cpu model : Brcm3300 V0.0
    cpu MHz : 294.91
    BogoMIPS : 294.91 ( udelay_val : 147456 HZ = 1000 )
    wait instruction : yes
    microsecond timers : yes
    tlb_entries : 32
    extra interrupt vector : yes
    hardware watchpoint : no
    ASEs implemented : mips16
    VCED exceptions : not available
    VCEI exceptions : not available
    RAC setting : I/D-RAC enabled
    unaligned access : 62
    rdhwr/brdhwr traps : 0 / 0
    root@dm800:~#

    MfG
    Hausmeister111
    ORDNUNG MUSS SEIN!!!:aufsmaul:
    ALLES FÜR DIE DREAM; ALLES FÜR IHAD!!!:woot:
    :aufsmaul::rot:!!! DREAMBOX CLONE !!! :rot::aufsmaul:

  • dm800 , 1.6 img



    Code
    root@dm800:~# cat /proc/cpuinfo | grep build | awk '{print $4}'
    dm800
    root@dm800:~#
  • Zitat

    Original von hausmeister111
    Mit der Image (opendreambox-1.6) ist BA insterliert und die vorhandenen images fnkitonieren gut, nur beim booten von BA kan ich die ferschiedenen imades nicht auswählen!


    Im BA Plugin anderes FB device auswählen /dev/input/event1 ist mal einen Versuch wert


    Dann bleiben wir halt mal beim /proc/cpuinfo :)


    Ich mag das nur nicht nochmals ändern müssen, weil jedesmal recht mühsam


    LG
    gutemine

    Einmal editiert, zuletzt von gutemine ()

  • von gutemine
    (Im BA Plugin anderes FB device auswählen /dev/input/event1 ist mal einen Versuch wert


    Dann bleiben wir halt mal beim /proc/cpuinfo :)


    Ich mag das nur nicht nochmals ändern müssen, weil jedesmal recht mühsam)





    Sind alle beide lehr, hat das da mit zu tun?


    Danke für die schnelle antwort!!!

    MfG
    Hausmeister111
    ORDNUNG MUSS SEIN!!!:aufsmaul:
    ALLES FÜR DIE DREAM; ALLES FÜR IHAD!!!:woot:
    :aufsmaul::rot:!!! DREAMBOX CLONE !!! :rot::aufsmaul:

  • sorry, das waren 2 Antworten in einem. Du sollst im BA Plugin das FB device ändern (bei den bootmanager einstellugnen oder ba.sh device /dev/input/event1 (oder 2,3,4) Und immer schon rebooten um zu sehen ob es endlich geht)


    LG
    gutemine

  • Zitat

    Original von gutemine
    Eines nach dem Anderen & Danke fürs Testen.


    Der Bootmanager ist ja noch nicht auf die 500HD angepasst, poste mir bitte mal den Inhalt vom /media/ba/.balog der 500HD


    LG
    gutemine


    mfg


    OoZooN


    .................................................................


    :403: Two Beer or not two Beer, that's the Question :408:


    aktuelle Nachrichten rund um OoZooN-Images gibt es auf Twitter

    Einmal editiert, zuletzt von OoZooN ()