VLCF NG + vlcf_x86

  • Hi,


    ich wollte eine unabhängige vlc konfiguration für vlcf x86 damit vlc am computer ganz normal als player benutzt werden kann und zeitgleich vlc für das streamen über vlcf x86 funktionieren sollte. nachdem ich den richtigen ansatz gefunde hatte, musste ich leider feststellen dass die letzte vlcf x86 version nicht dafür geeignet war, weil diese immer wieder den vlc path änderte. so trat ich mit dem mordillo in Kontakt und berichtete ihm kurz von der problematik. kurz darauf bekam ich von ihm eine aktuelle version von vlcf x86 die ich auf nachfrage auch hier posten sollte. (siehe anhang).


    nun zur eigentlichen konfiguration um vlc als normalen audio/video player (mit gui) und zum streamen für vlcf x86 (ohne gui) einzurichten.

    • extrahiere die vlcf x86 version aus diesem post
    • extrahiere die vlcrc (VLC Player Konfig) aus vlcrc.zip in das vlcf x86 verzeichnis
    • konfiguriere bei "Pfad zum VLC Player" in vlcf x86 folgendes: C:\Programme\VideoLan\VLC\VLC.exe --config C:\Programme\vlcf_x86_64\vlcrc


    Solltet ihr andere Installationspfade haben müsst ihr dies entsprechend ändern. Bei mir klappt dies wunderbar. Probiert es aus und erzählt mal.

  • Hallo,
    also ich habe das jetzt ausprobiert, und stelle eigentlich keine Veränderung fest!
    Sobald ich nur einmal das vlcf_x86 starte, wird auch der vlc.exe gestartet. Nachdem ich den vlcf_x86 beende, bleibt aber der vlc.exe weiterhin aktiv, man kann ihn nur mittels Taskmanager beenden. Wenn ich anschliessend den vlc.exe starte, bekomme ich kein Interface mehr. Dazu muss ich erst das Verzeichnis C:\Dokumente und Einstellungen\User\Anwendungsdaten\vlc löschen, sonst kann ich den vlc.exe nie mehr bedienen.
    Ausserdem hab ich oft das Problem, dass bei der Wiedergabe das falsche Seitenverhältnis wiedergegeben wird. Wie kann man das umstellen bzw. korrigieren?
    Grüsse,
    Sternbein

  • Es würde einfach reichen, ich habe es schon in einem frühren Posting geschrieben wenn vlcf_x86_64.exe in der vlcrc den Eintrag


    # Interface-Modul (Text)
    intf=http


    nicht setzen würde. Damit verschwindet das Programmfenster.


    zum Einschalten des web-Interface genügt dieser Schalter, der auch gesetzt wird:


    # Extra Interface-Module (Text)
    extraintf=http


    Aber warum einfach, wenn es auch viel komplizierter auch geht ...


    lg

  • Hallo,


    bekomme folgende Fehlermeldung am Pc


    Wiedergabefehler:
    DVDRead konnte die Disk "" nicht öffnen.
    Ihre Eingabe konnte nicht geöffnet werden:
    VLC kann die MRL 'dvdsimple://' nicht öffnen. Sehen Sie für Details im Fehlerprotokoll nach.





    Meine Umgebung:
    DMM 800S
    Gemini 5
    Vlc 1.0.5 am Pc installiert
    VLC per Blue Pannel auf der Dream installiert
    Webif bekomme ich angezeigt auf dem PC


    Wenn ich eine *.Avi abspielen möchte bekomme ich nur einen schwarzen Bildschirm der nach 20 sec wieder weg ist und die Fehlermeldung am Pc.


    mit Gemini 4.6 konnte ich diese Datei noch problemlos abspielen.


    Ein /var/tuxbox/config/vlcf_original.xml gibt es jedoch auf meiner Dreambox nicht !!!


    Was mach ich falsch bzw hat sich da was geändert??


    Gruß Rar

  • ich habe bei iso dateien keinen ton... das bild ist super...


    hat jemand eine idee?


    <setup name="File" pic="dvd.png" ext="ISO" Videorate="1000" Videotranscode="0" Videocodec="mp2v" Videosize="704x576" Audiorate="192" Audiotranscode="1" fps="25" soutadd="soverlay,senc" />

  • Hallo Leute, ich habe gerade das VLC NG installiert. Kein Ton aber Bild soweit okay. Bei MKV Dateien tut er sich sehr schwer. Er lädt bis 100% und dann ist nichts mehr. Kein Bild kein Ton.


    Meine Umgebung ist folgende :


    Box : DM7000S mit GM 4.7
    Server : MS Windows Homeserver
    VLC die neuste Version (V 1.xx)


    Wenn ich meinen XP Rechner nehme, dann gehts. VOB, AVI kein Problem. Nur bei MKV macht auch der XP Rechner zicken.


    Was kann das sein ??


    Danke für Eure Hilfe.

  • i can't understand dutch!
    It's possible to obtain a translated version of this programs ??
    What's it's your use ? It's a new version of VLC working for make server on my pc ? OR it's only a GUI for make a better configuration ??


    It's all in dutch :frowning_face: i can't understand how i can set all value.....



    *EDIT*
    I have installed VLCF_NG on My Decoder.
    I have set VLCF_x86 and i can watch all folder.... but i can't found any file!!!
    I can only watch the folder!! No file!!


    What's working this programs ?!!?!?! Ok.. i don't need any .xml file like normal VLCF but now no file watching!


    *EDIT 2a*


    I have try some solution!!! Now When i try to open D:\ i can watch the file on C:\... when i open E: same result!!!
    I always found file on my C:\!!!!


    I have try to delete and re-extract the vlcf_x86 but same result!!!
    how i can fix this !?!?!?!?!?!?!!?!?!?!!?!?


    I have post the log!!! in the log it's possibly to watch all content... but after this on decoder i can't found any file!!!
    Because !!?!!?!?!?!?!?!


    It's a dead project this or not ?!?!?!!?!

  • Sorry for double post........ but i have found my solution for my "problems"


    Before i can't watch any file because i need to associate some file to VLC!!
    Yes!! I need only to associate some extension to VLC....... after this now i can watch all extension file i have associated.


    I thinks this is a little bug because i don't need to use VLC to default player on my XP.... i want to use Media Player Classic installed with K-Lite Codec Pack.



    Otherwise i have a question for you... i have try this plugins with the latest 1.1.0:
    No sound....all video glitches and after 10 second enigma goes in crash!!


    What's it's the best 0.9.x or 0.8.x version i can use whit this plugins ?!!??!


    Another question:
    It's possible to associate temporanely the extension to VLC and reassociate to another programs when i close the server ?!?!?
    Example..... if it's possible i want to set extension .avi to VLC when server it's start.... and i want' to reset .avi extension to other player when i close the server...


  • Sorry for another post.
    I have try this solution:
    Don't working because i can't set the --config=patch of vlcrc on the programs.
    I thinks i have create a batch... but the batch can not be selected.
    Make a new version..........


    *EDIT*
    With 0.9.x i can't use this --config because we need to insert = !
    The correct command it's vlc --config=PATH!!!
    This version of vlcf_x86 not support the simbol = in the config file! and vlc don't start!


    *EDIT 2a*
    This project it's all bugged and not working!!!
    I have try to use the vlc_x86_x64 from the first post!!!
    I have set another version of VLC Start on E:\ and always started the version from c:\programs files\vlc folder!!!!


    This project it's dead or not !?!?!?!

  • I need to post my conclusion after many and many others trials:


    This plugins it's completely usless on Windows XP.


    - I have installed the 0.9.8a of videolan on my XP
    - I have associated the .avi exension with VLC
    - I have run the vlc_x86_x64 and configurated!
    - i have installed vlcfng on my dreambox 600pvr and run it


    Now all working......... but i can obtain exactly the same result if i use normal vlc 0.9.8a with the "old" vlcf1.8.0 !!!!


    * * * * * * THE SAME F******G RESULT * * * * * *


    You don't get improvements this plugins......... i have try to reproduce the same file and i can obtain same result:
    - Same Glitches
    - Same Problems with crash of VLC
    - Same Problems with sometime the streaming closing with no apparent reason


    I REPEAT!!! THE SAME RESULT!


    At this point the every version of vlc_x86_x64 posted in this thread appear working only with 0.9.8a and only installed to C:\Programs File\Videolan\VLC folder.
    If you have installed VLC to another folder the vlcf_x86_x64 can't start vlc and this plugins it's completely unsless!!!


    At this point i thinks the best version working for streaming it's 0.8.6h and this unsless plugins don't working whit this version of vlc!


    Summary of my TEST:
    - COMPLETELY UNSLESSS
    - AND It's a DEAD PROJECT (because i don't have obtain one! Repeat One reply or your suggestion in this two days)

  • Woran kann es liegen, dass nur das Bild erscheint?
    Ton ging am Anfang mal aber jetzt nirgends mehr, egal was für Dateitypen ich öffne.


    Habe VLC 1.1.3 und Win7, DM 7020, mit Gemini 0470.


    Eins vorweg: AC3 als Standard habe ich bereits deaktiviert/aktiviert... es ändert sich einfach nichts.

  • Zitat

    Original von cluster2a
    Woran kann es liegen, dass nur das Bild erscheint?
    Ton ging am Anfang mal aber jetzt nirgends mehr, egal was für Dateitypen ich öffne.


    Habe VLC 1.1.3 und Win7, DM 7020, mit Gemini 0470.


    Nabend.


    Da ich seit rund einem Monat nix mehr zur Dreambox gestreamt hatte, ist mir nach den 4 letzten Updates von VLC (welche alle innerhalb eines Monats veröffentlicht wurden) gar nicht aufgefallen, dass das Streamen zwar noch funktioniert, allerdings ohne Ton.


    Ich habe daher wieder die Version 1.0.5 zurückgespielt, und seitdem funktioniert das Streamen wieder inklusive Ton.


    Ich hoffe ebenfalls auf eine Korrektur in einer der nächsten Versionen - allerdings müssen die Entwickler dafür erst einmal den Fehler ausfindig machen.


    VG

  • Hallo.
    Ich habe eine DM7000S mit dem letzten Gemini (4.7). Auf meinem Windows Home Server habe ich das VLCNG installiert, bzw. ins Verzeichnis gepackt. Leider geht nur Bild kein Ton. Wenn ich XP nehme schon. Hat da jemand ne Idee ?


    Auf beiden Systemen ist auch noch das normale VLC installiert. Ich weiß da echt nicht mehr weiter.


    Soll ich nochmal alles deinstallieren (Auf den Systemen und Box) und dann alles neu ? Das probiere ich nochmal und dann meld ich mich wieder. Wenn jemand anderes noch ne Idee hat, bin ich offen für jede Antwort.


    Danke schon mal.

  • So .... hab mir das Wochenende mal mit installieren und so um die Ohren gehauen. Ich hab alles Step by Step gemacht.


    Erstmal die Box neu geflashed. Hat jetzt Gimini 4.7. Kein Erfolg.
    Dann hab ich meinen Server neu aufgesetzt. VLC 1.1.5 inst. Kein Erfolg.
    Habe dann jeweils um eine Version runter gesetzt. Kein Erfolg.
    Dann habe ich das ganze mit Windows 7 probiert. Kein Erfolg.
    Ich habe immer ein Bild aber kein Ton. Nur was mir dann auffiel ist, das das nur bei VOB, AVI, MKV und MPG ist. Wenn ich das ganze mit einem TS File, also mit einem von der Dream aufgenommen Film, mache habe ich Ton. Das macht mich stuzig. Also muss doch der Fehler in meinem Windows System liegen, oder ?


    Ich bitte euch hiermit ganz herzlich mir zu helfen.


    Ich danke schonmal im vorraus.


    Oliver

  • kann mir jemand sagen, wie man auf diesem Weg ein falsches Seitenverhältnis korrigieren kann? Übers Player-Interface geht das ja nicht und auf Änderungen im Web-Interface reagiert der Player nicht. Sinnvoller wäre sogar eine Wahl zwischen 4:3 und 16:9

  • Hallo,


    ich schaffe es einfach nicht das WEB Interfache über 127.0.0.1:8080 zu öffnen.
    Ich habe sämtliche vlc Versionen unter Windows 7 schon ausprobiert. Auf meinem Vistarechner. funkitioniert das Streamen. NUr Unter windows 7 scheint irgendwas zu blockieren. Firewall ist ausgeschaltet. Egal was ich eintelle ich kann in firefox das web-if einfach nicht aufrufen.


    Wer hat eine Idee


    Vielen Dank

  • Unbedingt die Dos-Box als Administrator starten! ich habe mir dazu eine Verknüpfung zu cmd auf den desktop gemacht, die kann ich dann als Admin starten mit rechtsklick...
    Dann startet zumindest bei mir der VLC anständig und alles ist gut... :)
    Ich habe es als Dienst gestartet und das geht astrein seit Neustart des Rechners...


    Meine Config:
    - Windoof7 Ultimate 32-Bit
    - VLC 1.0.1
    - vlcf über Blue Panel bei Gemini 4.7 auf Dreambox 7020si


    Gruß
    Sven

  • Beim Streamen einer Divx vom PC auf meine DM600PVR habe ich starke Ruckler und Klötzchenbildung.
    Auf dem PC wird die Datei anstandslos mit VLC abgespielt.


    Probiert mit:
    VLC 0.8.6i und VLC 1.1.5


    DM600PVR und VLCF 1.8.0


    Woran könnte es liegen?