Die Unterbrechungen lassen mit der Zeit nach, je länger der DM900 und der TT an sind. Der Receiver hat das neue Originalimage.ä
Kurze Unterbrechungen bei der Wiedergabe.
-
-
wer hat seine Glaskugel gerade griffbereit?
-
Ich versuche es aber bekomme einfach kein Bild.
Muss wohl verstaubt sein. -
if anyone knows what the problem is that we often restart the enigma on the new gemini image dm 900, i attach the log thank you,and second problem is blu panel which does not support fhd format skins
-
djakac9
This crash happens when the video RAM are full.
The same here ---> https://dreambox.de/board/inde…&postID=189739#post189739Sure, the Bp support FHD. But your Skin has to support that.
-
now blocked my enigma so I have to restart the switch
-
Try another skin
You have used all available video ramCodeFBIO_ACCEL (Invalid argument) ION_IOC_ALLOC: Cannot allocate memory GL: [src=33350 type=33356 id=1285 severity=37190] GL_OUT_OF_MEMORY GL Error: 1285 GL: [src=33350 type=33356 id=1286 severity=37190] GL_INVALID_FRAMEBUFFER_OPERATION GL Error: 0x506 (1286) at ../git/lib/gdi/glsl.cpp:467: glDrawElements(GL_TRIANGLES, 6 , GL_UNSIGNED_BYTE, 0) FATAL: Abort.
-
how to set debug
-
After you set the debug on (allocation is ok, then you see what allocate new memory) you can see allocation in the enigma2 log.
Make a telnet or ssh connection and type journalctl -fu enigma2
or type journalctl -f -u enigma2 > /tmp/enigma2.log to write the log to /tmp/ in a file.Don't forget to disable the debug, this can slow down your Dreambox.
-
Ihr wisst aber schon das der skin den ihr da benutzt zum einen ein uhd skin ist der dann auch noch völlig mit allem möglichen was auch immer zugeballert ist und wie schon die Vorgänger da einiges am system verbiegt und dann sollte jedem klar sein das uhd doch nunmal keinen Sinn macht außer den RAM voll zu balllern.
Ich hab damals nicht umsonst nur ein Testprojekt mit meinem uhd gemacht um einige Sachen besser zu sehen um dann mal für die Zukunft etwas schon zu wissen und Fehler leichter zu finden.
Aber einige denken anscheinend Hauptsache sie haben einen uhd skin der dann auch noch nicht wirklich vom system verarbeitet wird sondern das system er kaputt macht ist ja so toll.
Daher es ist kein Wunder das ihr da euer system und den Grafikram verheizt da muss man nicht lange rum suchen,es ist der skin der das verursacht -
djakac9
gp3 hat default hd und fhd support, du nutzt aber einen uhd skin und uhd support gibt es keinen außer es kommt mal eine dreambox die so was wirklich verarbeiten kann.
Daher du solltest denke erstmal schauen was du da wirklich nutzt ,denn anscheinend ist dir nicht klar das du da einen uhd skin nutzt der dein system er kaputt macht und absolut keinen Sinn auf der dreambox macht. -
Zitat
Original von Swiss-MAD
Try another skin
You have used all available video ramSag ich doch, aber wer will kann natürlich auch auf die harte Tour das System etwas kennen lernen.
-
ok but why do the skin work with uhd support, so your recommendation is that it makes no sense to use uhd skin
-
There are no "UHD skins", the HW is scaling down the GUI to FHD, so it makes no sense using this skin at all.
-
..
-
ok thanks i understood