DM8000 bootet micht DM7080 kein HDMI

  • Hey
    könnt ihr mir BITTE helfen.
    Folgendes vor Kurzem gab es bei uns einen Blitzschaden die DM7080 und ein LG-Fernseher hat es abgekriegt. Seit dem gehen die HDMI nicht mehr. (Dream7080 ohne HDMI =Briefbeschwerer hat ja nicht einmal Composite) Die dream lässt sich zu dem nicht flashen. Hab schon alles versucht.


    Mein Zweites Problem möchte eine DM8000 ins Wohnzimmer stellen bis das mit der Versicherung sich geklärt hat. Mein Problem ist nur die DM8000 Stand knapp ein Jahr auf dem Dachboden im Karton. Sie bootet nicht und wenn doch dann nur ein altes 1.6 Image, dabei erkennt sie aber keine Tuner. Kann es sein das ich irgendwelche Kondensatoren tauschen muss und wenn ja welche?
    Hab sonst nur noch eine Dbox2 und kann kein SKY sehen.

  • Wenn die Box mit einem OE1.6 Image läuft, mit einem "aktuellen" OE2.0 jedoch nicht, deaktiviere die Kernel Command Line im Bios oder stelle sie für UBIFS richtig ein.
    Ein Bios-Reset ist auch oft hilfreich.


    https://dream.reichholf.net/wi…anuell_.C3.BCberschreiben

  • erstmall danke hab ich gemach kein erfolg:
    hier die log´s:

    Code
    CFE>  BCM97400  AB FFFFFFFF  1s00000020 K6 F


    das ist der erste start display bleibt dunkel
    beim zweiten mall sieht es so aus:

    Code
    BCM97400  AB FFFFFFFF  1s Sync=1 LLMB=1 L2=1 RAC_I=1 RAC_D=1  Copy Code...34TUCV  (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.  Dreambox D M8000  FIRST STAGE 1.10 {BO23456} [m  2ND STAGE OK, build #84 (2011-09-01)  0.000  - BCM board setup Configure MEMC1_2........ Done 0.039  - fp init FP version 7 detected 0.106  - ca init 0.599  - load config 1.179  - config loaded.  * press [S] to enter setup 1.193  - ide init OLED found! lcd: BOOT #84  - NAND PROBE: 2c da 80 95 (normal) 1.549  - main control Initializing USB.  USB: Locating Class 09 Vendor 0000 Product 0000:  USB Hub   - read config file: /boot/secondstage.conf 1.593  - load /boot/secondstage.conf to 833000c0 (max=65535) detected jffs2 blocksize: 128kb USB: New device connected to bus 0 hub 1 port 1 USB: Resetting device on bus 0 port 1 USB: Locating Class 09 Vendor 04CC Product 1520:  USB Hub  ++++++++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUU 3.354  - jffs2 size: 3328 kb 3.357  - network: 3.359 dhcp 3.411  - starting network 3.417  - httpd, telnetd, dreamupd dreamupd initialized 3.422  - ok. start receiving packets 3.426  - using jffs2 Scanning JFFS2 FS:   .  | / - \ | / - \ | / - \  done.  find_inode failed for name=secondstage.conf  load: Failed to find inode  3.528  - size: 0  - failed to open /boot/secondstage.conf 3.534  - not entering setup 3.536  - execute script: /cf/autorun.bat 3.540  - load /cf/autorun.bat to 833000c0 (max=65535) 3.545  - size: -1  - failed to open /cf/autorun.bat 3.549  - force boot: -1 3.551  - try boot from 1: 3.554  - execute script: /boot/autoexec.bat 3.558  - load /boot/autoexec.bat to 833000c0 (max=65535) 3.563  - using jffs2 3.565  - size: 162 lcd: /boot/bootlogo-dm8000.elf.gz 3.594 oled: string too long: '/boot/bootlogo-dm8000.elf.gz' 3.617  - load /boot/bootlogo-dm8000.elf.gz to 82000000 (max=16777216) 3.623  - using jffs2 3.638  - size: 263951 3.640  - decompressing elf (compressed: 263951 bytes) 3.703  - decompression ok (uncompressed: 655068 bytes) 3.708  - loading elf image at 88000000 3.904  - jumping to 8044ef80 3.907  - load /boot/bootlogo-dm8000.jpg to a2800000 (max=1048576) 3.912  - using jffs2 3.937  - size: 170039 bootlogo size: 170039 Supported modes: NTSC !NTSC_J !NTSC_443 !PAL_B !PAL_B1 !PAL_D !PAL_D1 PAL_G !PAL_H !PAL_K !PAL_I !PAL_M !PAL_N !PAL_NC !PAL_60 !SECAM_L !SECAM_B !SECAM_G !SECAM_D !SECAM_K !SECAM_H 1080i 720p 480p 1080i_50Hz !1250i_50Hz 720p_50Hz 576p_50Hz DVI_640x480p DVI_800x600p DVI_1024x768p !DVI_1280x720p_50Hz !DVI_1280x720p !DVI_1280x720p_ReducedBlank !DVI_640x480p_70Hz !DVI_640x480p_72Hz !DVI_640x480p_75Hz !DVI_640x480p_85Hz !DVI_1280x720p_70Hz !DVI_1280x720p_72Hz !DVI_1280x720p_75Hz !DVI_1280x720p_85Hz !Custom2  best supported mode is 25 using 1920x1080i (50.00 Hz) HDMI using colorspace: 1 create surface 1920 1080 Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org> parsing JPEG header.. Virtual FB Size: 1280x720 lcd: /boot/vmlinux-3.2-dm8000.gz 5.074 oled: string too long: '/boot/vmlinux-3.2-dm8000.gz' 5.097  - load /boot/vmlinux-3.2-dm8000.gz to 82000000 (max=16777216) 5.103  - using jffs2 5.171  - size: 2843137 5.173  - decompressing elf (compressed: 2843137 bytes) 5.794  - decompression ok (uncompressed: 6060412 bytes) 5.798  - loading elf image at 88000000 6.568  * Quiesce... 6.570  *** Turning off USB USB: Unregistering Hub VID 0x04cc PID 0x1520 USB: Powering down bus 0 port 4 USB: Powering down bus 0 port 3 USB: Powering down bus 0 port 2 USB: Powering down bus 0 port 1 USB: Unregistering Hub VID 0x0000 PID 0x0000 USB: Powering down bus 0 port 2 USB: Unregistering Device VID 0x04cc PID 0x1520 USB: Powering down bus 0 port 1 6.620  *** Quiesce network... 6.634  - jumping to 8048c850 [    0.000000] Linux version 3.2-dm8000 (oe@porky.dream-property.net) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP Mon Mar 16 20:58:18 UTC 2015 [    0.000000] Fetching vars from bootloader...  [    0.000000] Early serial console at MMIO32 0x10400b00 (options '115200n8') [    0.000000] bootconsole [uart0] enabled [    0.000000] Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 pci=1 smp=1 moca=0 usb=1 [    0.000000] Using 256 MB RAM (from straps) [    0.000000] Fetch var 'memsize' = '154' [    0.000000] CPU revision is: 0002a042 (Brcm4380) [    0.000000] FPU revision is: 00130001 [    0.000000] Determined physical RAM map: [    0.000000]  memory: 10000000 @ 00000000 (usable) [    0.000000] bmem: adding 148 MB LINUX region at 5 MB (0x0941a000@0x005e6000) [    0.000000] bmem: adding 102 MB RESERVED region at 154 MB (0x06600000@0x09a00000) [    0.000000] Zone PFN ranges: [    0.000000]   Normal   0x00000000 -> 0x00010000 [    0.000000] Movable zone start PFN for each node [    0.000000] early_node_map[1] active PFN ranges [    0.000000]     0: 0x00000000 -> 0x00010000 [    0.000000] On node 0 totalpages: 65536 [    0.000000] free_area_init_node: node 0, pgdat 8058f280, node_mem_map 81000000 [    0.000000]   Normal zone: 512 pages used for memmap [    0.000000]   Normal zone: 0 pages reserved [    0.000000]   Normal zone: 65024 pages, LIFO batch:15 [    0.000000] PERCPU: Embedded 7 pages/cpu @81203000 s5440 r8192 d15040 u32768 [    0.000000] pcpu-alloc: s5440 r8192 d15040 u32768 alloc=8*4096 [    0.000000] pcpu-alloc: [0] 0 [0] 1  [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024 [    0.000000] Kernel command line: ubi.mtd=root root=ubi0:rootfs rootfstype=ubifs rw console=null debug bmem=102M@154M [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [    0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. [    0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes [    0.000000] Memory: 149332k/262144k available (4714k kernel code, 112812k reserved, 979k data, 220k init, 0k highmem) [    0.000000] Hierarchical RCU implementation. [    0.000000] NR_IRQS:128 [    0.000000] Measuring MIPS counter frequency... [    0.000000] Detected MIPS clock frequency: 405 MHz (202.508 MHz counter) [    0.000000] Console: colour dummy device 80x25 [    0.001000] Calibrating delay loop... 401.40 BogoMIPS (lpj=200704) [    0.013000] pid_max: default: 32768 minimum: 301 [    0.014000] Mount-cache hash table entries: 512 [    0.017000] SMP: Booting CPU1... [    0.018000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. [    0.018000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes [    0.019000] CPU revision is: 0002a042 (Brcm4380) [    0.019000] FPU revision is: 00130001 [    0.029000] SMP: CPU1 is running [    0.029000] Brought up 2 CPUs [    0.030000] devtmpfs: initialized [    0.034000] NET: Registered protocol family 16 [    0.036000] PCI2.3->SDRAM window: 256 MB [    0.043000] bio: create slab <bio-0> at 0 [    0.045000] SCSI subsystem initialized [    0.046000] libata version 3.00 loaded. [    0.047000] usbcore: registered new interface driver usbfs [    0.048000] usbcore: registered new interface driver hub [    0.049000] usbcore: registered new device driver usb [    0.050000] Advanced Linux Sound Architecture Driver Version 1.0.24. [    0.051000] pci 0000:00:01.0: [168c:001a] type 0 class 0x000200 [    0.052000] PCI: found device 168c:001a on PCI2.3 bus, slot 1 (irq 33) [    0.053000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff] [    0.054000] pci 0000:00:01.0: BAR 0: assigned [mem 0xd0000000-0xd000ffff] [    0.055000] pci 0000:00:01.0: BAR 0: set to [mem 0xd0000000-0xd000ffff] (PCI address [0xd0000000-0xd000ffff]) [    0.056000] pci 0000:01:00.0: [14e4:8602] type 0 class 0x000101 [    0.057000] PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42) [    0.058000] pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff] [    0.059000] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref] [    0.060000] pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff] [    0.061000] pci 0000:01:00.0: BAR 5: set to [mem 0x10510000-0x10510fff] (PCI address [0x10510000-0x10510fff]) [    0.062000] pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref] [    0.063000] Switching to clocksource upg [    0.075000] NET: Registered protocol family 2 [    0.111000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [    0.119000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [    0.126000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [    0.133000] TCP: Hash tables configured (established 8192 bind 8192) [    0.140000] TCP reno registered [    0.143000] UDP hash table entries: 128 (order: 0, 4096 bytes) [    0.149000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [    0.156000] NET: Registered protocol family 1 [    0.161000] RPC: Registered named UNIX socket transport module. [    0.167000] RPC: Registered udp transport module. [    0.172000] RPC: Registered tcp transport module. [    0.177000] RPC: Registered tcp NFSv4.1 backchannel transport module. [    0.184000] PCI: CLS 0 bytes, default 64 [    0.191000] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc. [    0.199000] SGI XFS with security attributes, large block/inode numbers, no debug enabled [    0.209000] msgmni has been set to 291 [    0.214000] io scheduler noop registered [    0.218000] io scheduler cfq registered (default) [    0.223000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [    0.251000] serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A [    0.260000] loop: module loaded [    0.264000] sata_brcmstb 0000:01:00.0: version 4.0 [    0.269000] brcm-pm: enabling sata clocks [    0.273000] PCI: Enabling device 0000:01:00.0 (0000 -> 0003) [    0.279000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [    0.483000] scsi0 : sata_brcmstb [    0.487000] scsi1 : sata_brcmstb [    0.490000] ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42 [    0.498000] ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42 [    0.735000] 4366 kb/s [    0.737000]  - NAND PROBE: 2c da 80 95 [    0.741000] ONFI flash detected [    0.745000] ONFI param page 0 valid [    0.748000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08AAD) [    0.756000] Scanning device for bad blocks [    0.831000] ata1: SATA link down (SStatus 4 SControl 300) [    0.933000] Creating 4 MTD partitions on "MT29F2G08AAD": [    0.938000] 0x000000000000-0x000010000000 : "complete" [    0.946000] 0x000000000000-0x000000100000 : "loader" [    0.952000] 0x000000100000-0x000000800000 : "boot" [    0.958000] 0x000000800000-0x000010000000 : "root" [    0.965000] bcmemac: Broadcom STB 10/100 EMAC driver v3.0 [    0.973000] bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:09:34:1c:b8:07) [    0.982000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [    0.989000] brcm-pm: enabling usb clocks [    0.993000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI [    0.998000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 [    1.037000] ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300 [    1.048000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 [    1.054000] hub 1-0:1.0: USB hub found [    1.058000] hub 1-0:1.0: 2 ports detected [    1.063000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI [    1.068000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 [    1.107000] ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500 [    1.118000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 [    1.124000] hub 2-0:1.0: USB hub found [    1.128000] hub 2-0:1.0: 2 ports detected [    1.133000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [    1.139000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI [    1.144000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3 [    1.147000] ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400 [    1.168000] ata2: SATA link down (SStatus 4 SControl 300) [    1.223000] hub 3-0:1.0: USB hub found [    1.227000] hub 3-0:1.0: 2 ports detected [    1.232000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI [    1.237000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4 [    1.245000] ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600 [    1.316000] hub 4-0:1.0: USB hub found [    1.320000] hub 4-0:1.0: 2 ports detected [    1.325000] Initializing USB Mass Storage driver... [    1.330000] usbcore: registered new interface driver usb-storage [    1.336000] USB Mass Storage support registered. [    1.341000] i2c /dev entries driver [    1.345000] ALSA device list: [    1.348000]   No soundcards found. [    1.352000] TCP cubic registered [    1.355000] NET: Registered protocol family 17 [    1.360000] Registering the dns_resolver key type [    1.365000] turn off boot console uart0