[gelöst]GP3 Wizard: Cannot Satisfy dependencies geminiplugin

  • Und wo hast du den gp3wizzard her?


    Hast du dich an die Install Anleitung aus unserem Wiki gehalten?

  • Warum stehen da Sachen wie Skins vom icvs ?
    Warum stehen da Sachen von einem cam feed?
    Das ist doch nie ein sauberes image ,da sind doch bestimmt alte Sachen mit aktuellen gemischt und daher eventuell die Probleme.
    Also das sieht zumindest für mich nicht nach einem sauberen Merlin mit sauberen gp3 wizzard aus.

    • Offizieller Beitrag
    Zitat

    Original von zombi
    Warum stehen da Sachen wie Skins vom icvs ?
    Warum stehen da Sachen von einem cam feed?
    Das ist doch nie ein sauberes image ,da sind doch bestimmt alte Sachen mit aktuellen gemischt und daher eventuell die Probleme.
    Also das sieht zumindest für mich nicht nach einem sauberen Merlin mit sauberen gp3 wizzard aus.


    +1 :top:

  • Habe das merlin-image vom 4.10.2013 wieder installiert und g3wizard_0.17-r0_all.ipk, dann über blaue taste gp3. Das läuft wieder. Danke für die Hilfe.

  • *kopfschüttel*


    warum antwortest du eigentlich nicht auf dei fragen?

  • Bei sowas brauch man sich auch nicht wundern wenn keiner mehr support bzw. Hilfe leisten möchte.
    Ich hab da einfach keine Lust mehr,sorry aber ich bin dann raus bei fragen zu Fehlern mit dem image bzw irgend etwas installiertem des users raho5.

  • Hallo zusammen,
    hjabe auch das problem, dass ich das Gemini3 Plugin nicht installiert bekomme.
    Hier die Meldung nach einem "opkg update && opkg install geminiplugin":



    root@dm7020hd:~# opkg update && opkg install geminiplugin
    Downloading http://download.blue-panel.com/gemini32/all/Packages.gz.
    Inflating http://download.blue-panel.com/gemini32/all/Packages.gz.
    Updated list of available packages in /var/tmp/gemini-all.
    Downloading http://download.blue-panel.com…i32/allcodes/Packages.gz.
    Inflating http://download.blue-panel.com…i32/allcodes/Packages.gz.
    Updated list of available packages in /var/tmp/gemini-allcodes.
    Downloading http://download.blue-panel.com…i32/dm7020hd/Packages.gz.
    Inflating http://download.blue-panel.com…i32/dm7020hd/Packages.gz.
    Updated list of available packages in /var/tmp/gemini-dm7020hd.
    Downloading http://download.blue-panel.com…i32/mips32el/Packages.gz.
    Inflating http://download.blue-panel.com…i32/mips32el/Packages.gz.
    Updated list of available packages in /var/tmp/gemini-mips32el.
    Downloading http://update.oozoon.de/opendr…rimental/all/Packages.gz.
    Inflating http://update.oozoon.de/opendr…rimental/all/Packages.gz.
    Updated list of available packages in /var/tmp/oozoon-all.
    Downloading http://update.oozoon.de/opendr…tal/mips32el/Packages.gz.
    Inflating http://update.oozoon.de/opendr…tal/mips32el/Packages.gz.
    Updated list of available packages in /var/tmp/oozoon-mips32el.
    Downloading http://update.oozoon.de/opendr…tal/dm7020hd/Packages.gz.
    Inflating http://update.oozoon.de/opendr…tal/dm7020hd/Packages.gz.
    Updated list of available packages in /var/tmp/oozoon-dm7020hd.
    Installing geminiplugin (0.81-r1) to root...
    Downloading http://download.blue-panel.com…gin_0.81-r1_mips32el.ipk.
    libcurl4: unsatisfied recommendation for curl-certs
    Collected errors:
    * satisfy_dependencies_for: Cannot satisfy the following dependencies for geminiplugin:
    * kernel-module-fuse *
    * opkg_install_cmd: Cannot install package geminiplugin.


    Ich habe vorher ein das Oozoon Image installiert
    "xperimental-image OoZooN-Image-dm7020hd-20151206.nfi"
    Benötige ich, weil ich Dual SAT Tuner in meine DM7020HD(v1) eingebaut habe.


    Danke für Eure Hilfe. Bin am Verzweifeln :frowning_face:

  • Danke Zombi,


    ich bin ein solcher Hornochse. Da ich nicht richtig lese, habe ich seit heute vormittag ca. 27x Das Image aufgespielt, Gemini 3 immer wieder installiert und ca. 1000x einen Neustart gemacht.


    Danke.Danke.Danke.

  • Hallo Zusammen habe ich mein Dreambox 7020HD Experimental Image (Original Image) drauf installiert und danach Gemini3 Wizard installiert. Bitte warten check dependencies dann kommt die Abbruch-Meldung "Cannot Satisfy dependencies geminiplugin!" und über telnet "opkg update && opkg upgrade da kommt viele collected errors Hinweise. Ich glaube wegen seit dem Dreamboxupdate online nicht mehr existiert. Ich möchte nur verdammt GP3 installieren warum kommt Cannot Satisfy dependencies geminiplugin!" hinweise? Ein Anfänger bin ich nicht. Aber so ein Problem noch nie gehabt. Übrigens habe ich mehrmals Dreambox mit dem neu frisch Image drauf installiert leider habe ich immer das selber Hinweise bekommen. Werde ich sehr dankbar wenn jemand mir helfen könnte.

  • es ist ganz einfach: Mit dem GP wird versucht Abhängigkeitenvom Dreambox-Server zu laden. Dieser ist wied selber bereits weißt nicht mehr existent. Also passen die Abhängigkeiten nicht.


    Ob wir für alle Boxen die Abhängigkeiten beistellen können, weiß ich leider nicht. Aber cepheus kann da sicher etwas zu sagen. Also ein wenig Geduld.

  • Zur Zeit kannst du nur ein schon vorhandene Backup Image mit Gemini installieren und benützen.

    Passende OE1.6/OE2.0 feed mirror sind (noch) nicht vorhanden, und dadurch schlagt es fehl bei der Installationsversuch.


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert


  • Mirror Feed installieren auf dein frisch installierte dreambox image, und dann klappt es auch mit dem installation von GP3


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert


  • Install Mirror Feed on your freshly installed dreambox image, and then the installation of GP3 will also work

    Hi @Cepheus ,

    Thank you for your reply.

    I installed the merlin and OOZOON images and installed Mirror Feed and ran the GP3 plugin but still the error "Cannot Satisfy dependencies gemini plugin!" It remains unresolved. This process did not work on any of the images I announced, but there was no problem in the past.