DreamBox Bootet nicht....Hilfe!!

  • Erst mal Hallo an alle,


    habe ein Problem mit meiner DreamBox 500S. Sie startet nicht mehr, es leuchtet nur die Grüne LED.


    Ein Nullmodemkabel hab ich am Start. Traue mich aber nicht irgend was dran zu machen! Hoffe das ihr mir da helfen könnt!!

  • Wenn du unsere Boardregeln kennen würdest (weil gelesen) wüsstest du, daß diese Frage
    hier nicht beantwortet wird.

  • Ich hatte erst vor wenigen Wochen das gleiche Fehlerbild.
    DM500s, nur noch grüne LED, sonst nix mehr.


    Ein neues Netzteil (hatte noch eines von einer DM600 zumTest) hat dann
    wieder Licht ins Dunkel gebracht. Läuft seit dem wieder ohne Probleme.


    Gruß: Mc.Giver

    DM920 HD SS C-FBC / DM7080 HD SS CC / DM7020 HD / DM525
    HTPC W10 Kodi / Amazon Fire TV
    R.I.P. > DM8000

  • Hallo Leute, vielleicht kann mir einer von euch weiterhelfen.
    Ich hab versucht das aktuelle Commando 15 Image zu flashen, jetzt bleibt die Box immer beim Startbildschirm hängen. Wenn ich mit DreamUp versuche die Box wieder zu beleben kommt nur "BoxType: Dm500". Im Putty zeigt er mir folgendes an:


    Zitat

    Dreambox DM500 loaded at: 00500000 0060016C relocated to: 00400000 0050016C board data at: 004FE124 004FE16C relocated to: 0040519C 004051E4 zimage at: 004058D9 004FD922 avail ram: 00501000 02000000 Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs ro Uncompressing Linux...done. Now booting the kernel Linux version 2.6.9 (user@Ubuntu) (gcc version 3.4.4) #480 Wed Apr 30 07:20:11 BST 2014 Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs ro PID hash table entries: 256 (order: 8, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 30080k available (1688k kernel code, 576k data, 80k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) NET: Registered protocol family 16 Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 20) is a 16550A ttyS1 at MMIO 0x0 (irq = 21) is a 16550A ttyS2 at MMIO 0x0 (irq = 22) is a 16550A loop: loaded (max 8 devices) ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Last modified Nov 1, 2000 by Paul Gortmaker NE*000 ethercard probe at 0xc3060600:<4>eth0: interrupt from stopped card 00 09 34 00 ff 52 eth0: NE2000 found at 0xc3060600, using IRQ 25. Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Using deadline io scheduler dreambox: flash mapping: 800000 at 7f800000 DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled disable flash VPP Creating 7 MTD partitions on "DreamBOX rev3+": 0x00000000-0x003c0000 : "DreamBOX cramfs+squashfs" 0x003c0000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" 0x00100000-0x003c0000 : "DreamBOX SquashedFS" 0x00000000-0x00100000 : "DreamBOX Cramfs" mice: PS/2 mouse device common for all mice i2c /dev entries driver IBM IIC driver v2.1 ibm-iic0: using standard (100 kHz) mode NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 80k init init started: BusyBox v1.17.2 (2014-01-05 16:58:37 GMT) starting pid 12, tty '': '/etc/init.d/rcS' Wed Apr 30 06:27:31 UTC 2014 [: 07: unknown operand [: 05: unknown operand head: module license 'Proprietary' taints kernel. framebuffer mem base: a0900000 0/0: 00004000 81f00000 0/1: 00000000 00000000 1/0: 20003000 80f00000 1/1: 00000000 00000000 trying to memset .. ok. fb_find_mode returned 0 allocated major 250 for denc. [DENC] set PAL [DENC] disable WSS core: Loaded IBM STB02xx core driver audio init AUDIO_CLEAR_BUFFER demux: init xp0_clk_stop registering frontend... disable continuous tone stb04_pig: $Id: stb04_pig.c,v 1.15 2007/02/28 21:34:47 ghost Exp $ [DENC] set mode to FBAS cp: can't stat '/var_init/tuxbox/config/enigma/enigma.conf': No such file or directory rm: can't remove '/var/tuxbox/plugins/01-tuxcom.cfg': No such file or directory VIDEO_SELECT_SOURCE open video clip-mode VIDEO_CLEAR_BUFFER VIDEO_PLAY / VIDEO_CONTINUE, state 1 0 write 1 event's ... VIDEO_STOP, state 0 ifup: can't open '/etc/network/interfaces': No such file or directory /etc/init.d/rcS: .: line 269: can't open '/var/etc/ntp' starting pid 70, tty '': '/etc/init.d/start' /etc/init.d/start: .: line 3: can't open '/etc/profile' Please press Enter to activate this console.


    Habt ihr eine Idee, was ich noch machen kann, da es über DreamUp ja nicht funktioniert ein neues Image zu flashen. Habe auch schon ein anderes Nullmodem Kabel ausprobiert.