Need help to install and config lt7links.cfg on LT6½ OE1.6 for DM7025 SP4 - (LT revision 3520)

  • Hello all,


    Yesterday installed a fresh and cleaned Image on a DM7025+, after configured the satellite and network settings I transfer the channels with DreamboxEdit, shutdown the dreambox and inserted a 4 GB CFcard, then I start the dreambox again, and removed the unused languages in /usr/share/enigma2/po to have more flash memory, then I searched the forum an how to to move some parts ofthe image to CF card.


    Ofcours I can use Freeze-plugin (to freeze the image on flash and use CF as flash) from gutemine or Flash-Extender from IHAD but LT have his own solution, the "lt7links.cfg", first I can't find it via DCC, also can't find a manual or how-to. Only what I find is next: (on LT forum)


    ----------------
    How to move Plugins out of flash.
    Move folder/usr/lib/enigma2/python/Plugins to a removable device (CF could bethe best place)
    mv/usr/lib/enigma2/python/Plugins /media/cf/Plugins
    and create a symbolic link:
    ln -s /media/cf/Plugins/usr/lib/enigma2/python/Plugins
    Reboot
    --------------------


    I think this is not these solution, I have tried but after this I get green error screens after i choose Dutch subtitles on Discovery Science.


    I don’t understand the following example:


    Example ltlinks.cfg (commented rows start with #).Note that this is for the CF card:
    #Store bouguets, timers, settings, etc
    /etc/enigma2=/media/cf/etc/enigma2
    #Store satellites, etc
    /etc/tuxbox=/media/cf/etc/tuxbox
    /usr/LTMenu/LTFavourites.xml=/media/cf/usr/LTMenu/LTFavourites.xml/etc/ShoutCaster.fav=/media/cf/etc/ShoutCaster.fav
    /etc/swapfile_on.sh=/media/cf/etc/swapfile_on.sh
    /etc/swapfile_off.sh=/media/cf/etc/swapfile_off.sh
    #Holds my automounts so I do not have to re-enable them
    /etc/auto.hotplug=/media/cf/etc/auto.hotplug
    /var/tuxbox/config/newcs.xml=/media/cf/var/tuxbox/config/newcs.xml
    #/etc/resolv.conf=/media/cf/etc/resolv.conf
    #/etc/passwd=/media/cf/etc/passwd


    • Where I can find lt7links.cfg and how I must transfer the part of Image orPlugins to CF?


    Can someone please help me to make a step by step plan to install the latest LT in my DM7025+ so everything run stable and smooth for a long time? I like LT images verry much!


    Have installed several times but some time I get a green error screen or I get message in telnet (Putty or DCC) that the Flash is full if I only wants to change the dreambox password.


    ----
    Also the HDD and CF are not automatically mounted, I must manually config with this settings:
    "umount /media/cf"
    "init 4"
    "mkfs.ext3 /dev/ide/host1/bus0/target0/lun0/part1"
    "mount /dev/ide/host1/bus0/target0/lun0/part1 /media/cf"
    "reboot"


    And so on for HDD with "mkdir /media/hdd/movie"
    ----


    After this I have on fstab file the following settings:
    /dev/ide/host0/bus0/target0/lun0/part1 /media/hdd auto defaults 0 0
    /dev/ide/host1/bus0/target0/lun0/part1 /media/cf auto defaults 0 0


    All help or advices, tips and tricks will be nice.

    DM7025SC > iCVS.GP3
    Visiosat Big Bisat > Alps 0,6dB BSTE8-801A (15w/5w/0.8w/9e/4.8e/13e/19e/23e)

  • Zitat

    Original von mbenbah
    ----


    After this I have on fstab file the following settings:
    /dev/ide/host0/bus0/target0/lun0/part1 /media/hdd auto defaults 0 0
    /dev/ide/host1/bus0/target0/lun0/part1 /media/cf auto defaults 0 0


    try this:
    /dev/ide/host1/bus0/target0/lun0/part1 /media/hdd auto defaults 0 0
    /dev/ide/host0/bus0/target0/lun0/part1 /media/cf auto defaults 0 0
    or:
    /dev/hda1 /media/hdd auto defaults 0 0
    /dev/hdc1 /media/cf auto defaults 0 0

  • Thank your for your help, but i am searching how i can use lt7links.cfg i googeled for some explanation or manual also on lt home page can't find what are the septs for it. CF and HDD are mounted now.


    LT uses all the memory on a DM7025+ and wants to transfer the most plugins, settings atc. etc. on CF so that the box runs smoother and stable and have more free memory on flash.


    LT gives always this note, is they bring out a new image:


    Note 1: Since this is image is based on LT7's code the LT Link Manager control file
    is not lt6links.cfg anymore it is now lt7links.cfg


    NOTE 1!
    If you have the device connected during boot then it will be mounted by
    /etc/fstab and in such case mountpoints below will be used.
    This is for your harddisc and if you choose to use LT Link Manager or LT EPG
    Cachelink Manager with CF.


    dm7025 (do not use USB on dm7025)


    /dev/sda1 /media/hdd auto defaults 0 0
    /dev/sdc1 /media/cf auto defaults 0 0


    DM7025SC > iCVS.GP3
    Visiosat Big Bisat > Alps 0,6dB BSTE8-801A (15w/5w/0.8w/9e/4.8e/13e/19e/23e)

    7 Mal editiert, zuletzt von mbenbah ()

  • try this file on your CF-card and reboot your box.


    you must repack the Zip File.


    You can edit the cfg. File as you wish.

    Dateien

    Dieser Beitrag wurde 3 mal editiert, zum letzten Mal von Ryu's Frau : Heute, 11:25.

    IF YOU LIKE MY WORK, PLEASE BUY ME A CURRYWURST MIT POMMES UND KETCHUP!!

    Einmal editiert, zuletzt von Ryu ()

  • Thanks Ryu will try it tonight :hurra:

    DM7025SC > iCVS.GP3
    Visiosat Big Bisat > Alps 0,6dB BSTE8-801A (15w/5w/0.8w/9e/4.8e/13e/19e/23e)

    5 Mal editiert, zuletzt von mbenbah ()