Glass System Utility ver 2.12 to 2.42

Hallo,
wie kann man es wieder deinstallieren ???

Zitat

Original von mfgeg

Code

ipkg remove enigma2-plugin-glasssysutil

Danke für die Antwort,
wie muss ich denn vorgehen ?

Hallo,
bei mir kommt diese Meldung.

Last login: Wed Sep 1 18:55:18 on ttys000
jorg-hoffmanns-imac:~ jorghoffmann$ telnet 192.168.0.112
Trying 192.168.0.112...
Connected to 192.168.0.112.
Escape character is '^]'.

**************************
* *
* The Gemini Project *
* *
**************************

OpenDreambox 5.1.0 dm8000

dm8000 login: root
root@dm8000:~# ipkg remove enigma2-plugin-glasssysutil
Collected errors:
* Could not lock /usr/lib/opkg/lock: No space left on device
root@dm8000:~#

dein flash ist komplett voll geschrieben ...

Funktioniert das Plugin auch bei CVS-Images mit z.B. einem Merlin Skin?

Syntax

were i must put the conf files cccam.cfg and were i put oscam.server
oscam.conf oscam.user??? i don't know it

thank tou for nice plugin too important in my cvs

#O: test 192.168.1.11:8888 test pass
#O: internet_server testserver.noip.org:16001
#O: MyDream 127.0.0.1:8888
# remote CCcam servers
#C: <name> <ip_adress:port> <login> <pass>
#
#C: test 192.168.1.11:16001
#C: internet_server testserver.noip.org:16001
C: MyDream 127.0.0.1:16001

what's name???
clients were are????

After trying you skins I now of course had to try this plugin as well and what can I say...just perfect.
It has everything one could ever need and just looks perfect when you use the skin as well.
I mean I had to clean up the directories afterwards quite a bit cause I really don't need that many camds and cardservers,but besides that great work.
Thanks a lot for this great plugin.

OK,a few things I noticed so far...:D

Start/Stop Services doesn't do much here.
It says...
That Automount is running(which it is) but when I stop it and disable it,in startup services,it is running again,after the next box restart.

Also it says that FTP server is off,but in startup service,the option says "yes" which means enabled I guess.crond is shown correctly in both.

In System Information my external HDD state isn't shown correctly.
It always says that it is running,even when it's sleeping.
Also the sleep option doesn't work.
Maybe you can implement the attached file,that is able to set external (usb) HDDs into sleeping mode.
I found this at the DMM forum(I'll look for it again and post the link later on).
I'll attach a little script as well that I momentarily use with the script manager to set the hdd into sleeping mode.

Also the services info in this screen tells me that FTP server is running,which is kinda confusing cause of the infos the other options(Start/Stop Services & Startup services) gave me.

The network info option,doesn't do anything here,I'm pretty sure this is because the whole plugin uses my ethernet IP instead of the one I'm actually using,which is the wi-fi ip.

The channels info as usual has the agc info instead of the much more usfull snrdb info.
I mean this is really no big deal whatsoever,but as this is an e2 plugin and all e2 boxes don't care about agc at all(on the 800 it's always 99% on the 8000 it's always 0%),it is kinda useless.

The CCcam info doesn't give me any info about my local card,eventhough it's inserted and working in the lower slot.

Ok,that's all I noticed for now.:)
Again,as said in the skin thread,I hope I'm not annoying you to much with all my little requests.:)

EDIT:Found the thread regarding the HDD standby.:)

https://www.dream-multimedia-t…age=Thread&threadID=12410

I use only part of the files that can be found there.
As shown in the zip,I only use it to set the HDD into sleeping mode,which is enough for me.

Also just noticed that the Glass CCcam Info doesn't work here.
It only gives me the following pic,eventhough CCcam is running and was started through the Universal Cam Manager.

Zitat

Original von sin
Also just noticed that the Glass CCcam Info doesn't work here.
It only gives me the following pic,eventhough CCcam is running and was started through the Universal Cam Manager.

The same here ! I write the adress of my CCcam-Server on FritzBox in the remote_servers.cfg !

But the CCcam will not be recognized !

Zitat

Originally posted by Lampertstaler

The same here ! I write the adress of my CCcam-Server on FritzBox in the remote_servers.cfg !

But the CCcam will not be recognized !

Working normally here on DM800.
Just push OK to go to next screen.

Hi,

I'm using Oscam/CCcam and the plugin works fine.
The only problem I have is that the Reader Entitlements Window is empty.
Can you help?

Btw, as I notice now: The EMM Info is also not correct.
I'm using Oscam 1.00-unstable_svn build #3880

shaman

Just like to thank u for that great plugin, satisfies every need.

Really cool and in combination with ur hd glass 14 skin unbeatable imho.

cu
kid