i-have-a-dreambox.com | Dreambox - Support

Register Calendar Members List Team Members Galerie to Portal Go to the Main Page

Boardrules Frequently Asked Questions Statistik Statistik Search Pinwand Dreambox Blog Ihad/Gemini Fan-Shop
i-have-a-dreambox.com | Dreambox - Support » ...::: Archiv - The Gemini Project (GP3, GP2 und GP) :::... » ...::: The Gemini Project 2 :::... » The Gemini Project DM8000 » komische probleme, bitte lesen » Hello Guest [Login|Register]
Last Post | First Unread Post Print Page | Add Thread to Favorites
Pages (2): [1] 2 next » Post New Thread Post Reply
Go to the bottom of this page komische probleme, bitte lesen
Author
Post « Previous Thread | Next Thread »
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Hilfe komische probleme, bitte lesen Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

hallo ihr lieben, ich fange nochmals von vorne an, da ich im 800er bereich keine antwort erhalten habe...

volgende konstelation:
dm800 gemini 5 im flash
ip: 192.168.0.18
sub: 255.255.255.0
get: 192.168.0.1
dns/namensserver: 192.168.0.1

dm 8k gemini 5 im flash
ip: 192.168.0.25
sub: 255.255.255.0
get: 192.168.0.1
dns/namensserver: 192.168.0.1

problem 8c:
nach dem hochfahren, kan ich mit der box im bp downloaden, software aktualiesieren usw.

nun das kuriose:
ein zugriff auf die box habe ich nicht!
(ftp, telnet, webif) alles tot
ein ping vom rechner zu 192.168.0.18 geht nicht (als wen sie nich da währe.

mache ich ein ping voner 8k zur 8c hab ich das selbe ergebniss.

hoffe das ihr mir helfen könnt dieses zu klären?!?


problem 8k ( und das is nun der ober hammer!)
is die 8c schon hochgefahren und in betrieb, und ich starte die 8k neu, so bootet diese nich mehr durch!

sie bleibt immer bei 50% des ladebalkens hängen (Dream multimedia)
mehrmaliges neubooten bringts nich...
netzwerk kabel abenommen / neu booten auch nicht...

daher auch hier mal die terminal ausgabe der 8k hoffe diese bringt aufschluss?!?

noch was zur info, is die 8k in betrieb, und die 8c kommt hinterher leuft sie zumindest bis eben auf das problem, das ich kein zugriff auf jene erhalte!


code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
BCM97400
AB
FFFFFFFF
1s
Sync=0
LLMB=0
L2=0
RAC_I=0
RAC_D=0

Copy Code...34TUCV

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM8000
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #76 (20091014)

0.000  - BCM board setup
Configure MEMC1_2........ Done
0.039  - fp init
FP version 7 detected
0.106  - ca init
0.816  - load config
1.396  - config loaded.
 * press [S] to enter setup
OLED found!
 BOOT #76(20091014)
 - NAND PROBE: 2c da 80 95 (normal)
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: New device connected to bus 0 hub 1 port 1
USB: Locating Class 09 Vendor 04CC Product 1520: USB Hub
USB: New device connected to bus 0 hub 1 port 2
USB: Locating Class 08 Vendor 058F Product 6362: Blacklisted.
USB wait failed.
waiting for USB failed!
detected jffs2 blocksize: 128kb
++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
bootlogo size: 195531
***  BHDM_EDID: One Bit Audio - **** NOT Implemented/Supported by BCM7400 ; [4D 02 00]
Available modes:
mode not available, selecting anyway.
using 1920x1080i (50.00 Hz)
HDMI
using colorspace: 1
***  BHDM: Waiting to transition to HDMI mode... 000CB001 0
***  BHDM: Waiting to transition to HDMI mode... 000CB001 0
***  BHDM: HDMI Output Mode: HDMI (Audio+Video)
create surface 1920 1080
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
parsing JPEG header..
JPEG Size: 1280x720
/flash/vmlinux.gz
<5>Linux version 2.6.18-7.3-dm8000 (tux@tux) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Apr 27 20:37:33 CEST 2010
Fetching vars from bootloader... none present, using defaults.
Detected 256 MB on MEMC0 (strap 0x2219c310)
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
1 831ffed8 83040e98
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1
CPU revision is: 0002a042
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 158
User-defined physical RAM map:
node [00000000, 09e00000: RAM]
node [09e00000, 06200000: RSVD]
<5>Reserving 98 MB upper memory starting at 09e00000
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists.  Total pages: 65536
<5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
before init RAC 0x01e0701f    0x0000000f    0x2fff0000
after init RAC 0x01e0705f    0x0000000f    0x2fff0000


__________________

03.07.2010 11:44 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Welche Geräte hast du noch im Netzwerk? Kommst du per telnet auf die Boxen, wenn die im flash Modus sind? Das bootlog ist zu knapp, um genaueres sagen zu können.

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 11:48 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
Homey[GER] Homey[GER] is a male
Dreambox Gott


images/avatars/avatar-17254.png

Registration Date: 12.02.2006
Posts: 6,959
Which box: DM7020HD; ONE UltraHD
External Storage: NAS
Which Image: DMM original

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Router mal neugestartet !?

Andere Geräte noch im LAN wie WLAN AccessPoints oder so? Hab hier auch son WLAN AP, wenn ich da meine dreambox anschliesse und sie anschliessend wieder per Kabel anschliesse, komm ich auch nich mehr auf die box bis ich mal die WLAN Kiste kurz abklemm weil der Router irgendwie noch denkt die Kiste hängt am WLAN AP ...

PS: Das bootlog bringt gar nix weil es deaktiviert ist und zuerst im BIOS aktiviert werden muss, ansonsten sieht man nur die ersten 1-2s des Bootvorgangs Augenzwinkern

PPS: Hatte hier vor paar tagen schonmal erklärt wie man's aktiviert:
Box bleibt beim hochfahren bei "Dream Multuimedia" stehen

This post has been edited 2 time(s), it was last edited by Homey[GER]: 03.07.2010 11:55.

03.07.2010 11:53 Homey[GER] is offline Search for Posts by Homey[GER] Add Homey[GER] to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

also sorry zum log, mehr ausgabe kommt leider nicht unglücklich

zum netwerk, ja hab einiges im netz wie auch nen w-lan repeater, aber alle geräte im netz habe feste ip´s

mir wurde die tage schon iner sb gesagt, mal roter neu starten und den switch... hat alles nich geholfen...

ein zugang zu er 8c habe ich zum flashen aber der bricht ab, hänge id die 8c und einen seperaten alleine an einen switch so kan ich diese wenigstens durgehend flashen.

zur ggf. "besetzten ip im router (timeout zum freigeben) daher ja das fänomen, wieso bootet dan die 8k nich durch wen kein lan mehr angeschlossen ist?!?

wie gesagt, so krass es klingen mag, aber die 8c zerschiesst das os der 8k *löl* wüsste nich wie ich anders sonst beschreiben soll, den imo bleibt mir mal wieder nur der weg, des neu aufsetztens der 8k

(das abrechen des fashens bei der 8k hab ich nicht) die kan normal im netz (rumwerkeln)

zur info: hatte vorher auf beiden boxen gemini 4.7 via lowfat und ozoon immer aktuell im flash gehalten, selbe konstelation, sebe ip´s nie derartige probleme / ausfallerscheinungen...

__________________

03.07.2010 12:02 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
Homey[GER] Homey[GER] is a male
Dreambox Gott


images/avatars/avatar-17254.png

Registration Date: 12.02.2006
Posts: 6,959
Which box: DM7020HD; ONE UltraHD
External Storage: NAS
Which Image: DMM original

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

ohne bootlog schwer zu sagen warum die 8k nicht mehr bootet. Wie man das logging aktiviert, hab ich geschrieben. Ab ins BIOS. Ohne das du da das logging aktivierst, kommt auch nix im log ...

Würde trotzdem mal testweise alle anderen LAN Geräte abklemmen, WLAN aus und so ... halt nur die beiden boxen und PC an router, auch mal alles neustarten und dann nochmal gucken

This post has been edited 1 time(s), it was last edited by Homey[GER]: 03.07.2010 12:07.

03.07.2010 12:06 Homey[GER] is offline Search for Posts by Homey[GER] Add Homey[GER] to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

ok, d.h. im bios logging aktivieren und nochmals via terminal auslesen, hab ich das richtig verstanden?

ich schau mal "blind" ins bios ob ich die stelle finde, könntest du mir diese sonst ggf. noch nennen bitte, thx smile

__________________

03.07.2010 12:09 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
Kaiser Wilhelm Kaiser Wilhelm is a male
Dreambox Kaiser


images/avatars/avatar-19753.jpg

Registration Date: 07.05.2009
Posts: 4,290
Which box: DM920
External Storage: HDD
Which Image: OE 2.5
Welcher Bildschirm: Philips 47PFL3605H/12
Origin: tiefste Eifel

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Schau auch nochmal nach den Adaptereinstellungen der 8K, könnte sein dass die WLAN und die Ethernet-Einstellungen gegeneinander arbeiten. Es könnte sein das die 8K sowohl via WLAN als auch via Ethernet am Router anklopft und es kan ja nunmal nur einen Chef geben.

Gruß
Kaiser

__________________
Gruß
Kaiser

GP4.1
Skin: Zombi-FHD Skin
03.07.2010 12:20 Kaiser Wilhelm is online Send an Email to Kaiser Wilhelm Search for Posts by Kaiser Wilhelm Add Kaiser Wilhelm to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

huhu, also habs gefunden, nur fatal imo bleibt die box schon nach ca 15% stehen... hier die ausgabe dazu...

(w-lan aner box is aus) smile

code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
214:
215:
216:
217:
218:
219:
220:
221:
222:
223:
224:
225:
226:
227:
228:
229:
230:
231:
232:
233:
234:
235:
236:
237:
238:
239:
240:
241:
242:
243:
244:
245:
246:
247:
248:
249:
250:
251:
252:
253:
254:
255:
256:
257:
258:
259:
260:
261:
262:
263:
264:
265:
266:
267:
268:
269:
270:
271:
272:
273:
274:
275:
276:
277:
278:
279:
280:
281:
282:
283:
284:
285:
286:
287:
288:
289:
290:
291:
292:
293:
294:
295:
296:
297:
298:
299:
300:
301:
302:
303:
304:
305:
306:
307:
308:
309:
310:
311:
312:
313:
314:
315:
316:
317:
318:
319:
320:
321:
322:
323:
324:
325:
326:
327:
328:
329:
330:
331:
332:
333:
334:
335:
336:
337:
338:
339:
340:
341:
342:
343:
344:
345:
346:
347:
348:
349:
350:
351:
352:
353:
354:
355:
356:
357:
358:
359:
360:
361:
362:
363:
364:
365:
366:
367:
368:
369:
370:
371:
372:
373:
374:
375:
376:
377:
378:
379:
380:
381:
382:
383:
384:
385:
386:
387:
388:
389:
390:
391:
392:
393:
394:
395:
396:
397:
398:
399:
400:
401:
402:
403:
404:
405:
406:
407:
408:
409:
410:
411:
412:
413:
414:
415:
416:
417:
418:
419:
420:
421:
422:
423:
424:
425:
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM8000
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #76 (20091014)

0.000  - BCM board setup
Configure MEMC1_2........ Done
0.039  - fp init
FP version 7 detected
0.106  - ca init
0.814  - load config
1.394  - config loaded.
 * press [S] to enter setup
OLED found!
 BOOT #76(20091014)
 - NAND PROBE: 2c da 80 95 (normal)
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: New device connected to bus 0 hub 1 port 1
USB: Locating Class 09 Vendor 04CC Product 1520: USB Hub
USB: New device connected to bus 0 hub 1 port 2
USB: Locating Class 08 Vendor 058F Product 6362: Blacklisted.
USB wait failed.
waiting for USB failed!
detected jffs2 blocksize: 128kb
++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
bootlogo size: 195531
***  BHDM_EDID: One Bit Audio - **** NOT Implemented/Supported by BCM7400 ; [4D 02 00]
Available modes:
mode not available, selecting anyway.
using 1920x1080i (50.00 Hz)
HDMI
using colorspace: 1
***  BHDM: Waiting to transition to HDMI mode... 000CB001 0
***  BHDM: Waiting to transition to HDMI mode... 000CB001 0
***  BHDM: HotPlug: DEVICE REMOVED!!
***  BHDM: Waiting to transition to HDMI mode... 000CB000 0
***  BHDM: Waiting to transition to HDMI mode... 000CB000 0
***  BHDM: Waiting to transition to HDMI mode... 000CB000 0
***  BHDM: Waiting to transition to HDMI mode... 000CB000 0
###  BHDM: Timeout Error transitioning to HDMI mode
create surface 1920 1080
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
parsing JPEG header..
JPEG Size: 1280x720
/flash/vmlinux.gz
<5>Linux version 2.6.18-7.3-dm8000 (tux@tux) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Apr 27 20:37:33 CEST 2010
Fetching vars from bootloader... none present, using defaults.
Detected 256 MB on MEMC0 (strap 0x2219c310)
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
2 831ffed8 83040e98
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1
CPU revision is: 0002a042
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 158
User-defined physical RAM map:
node [00000000, 09e00000: RAM]
node [09e00000, 06200000: RSVD]
<5>Reserving 98 MB upper memory starting at 09e00000
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists.  Total pages: 65536
<5>Kernel command line: console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
before init RAC 0x01e0701f    0x0000000f    0x2fff0000
after init RAC 0x01e0705f    0x0000000f    0x2fff0000
======> Before RAC_init:$22s5=00000020, $22s6(CBA)=11f0000c
@B1F0_001C=00000001, @B1F0_0004=2fff0000, @B1F0_0000=01e0701f, @B1F0_0008=0000000f
CBA = 11f00000    VALUE = 255    PAR_VAL2 = 0fff0000
RAC0 = b1f00000    RAC1 = b1f00008    RAC_RANGE = b1f00004
RAC_VALUE = 00087000
******* Using CFE setting for RAC
******* $22s0=e30e3406,    $22s5=00000020,    $22s6=11f0000c
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Synthesized TLB load handler fastpath (37 instructions).
Synthesized TLB store handler fastpath (37 instructions).
Synthesized TLB modify handler fastpath (36 instructions).
PID hash table entries: 2048 (order: 11, 8192 bytes)
Found MIPS counter frequency: 203 Mhz
Using 202.501 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 155392k/262144k available (3086k kernel code, 106632k reserved, 562k data, 152k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
plat_prepare_cpus: ENABLING 2nd Thread...
TP0: prom_boot_secondary: Kick off 2nd CPU...
CPU revision is: 0002a042
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Brought up 2 CPUs
migration_cost=1000
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
        PCI DEV in slot 1, ID=168c:001a
PCI PnP: PCI_BAR[0] = ffff0000
PCI PnP: size requested is 10000
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
brcm-pm: disabling power to USB block
brcm-pm: disabling power to ENET block
brcm-pm: disabling power to SATA block
JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 65) is a 16550A
brcm-pm: enabling power to ENET block
Broadcom BCM7400 P42 Ethernet Network Device v2.0 Apr 27 2010 20:36:08
SUNDRY revision = 74000032, have IP Hdr Opt=1
Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)
brcm-pm: enabling power to SATA block
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
scsi0 : sata_svw
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
ata1.00: ATA-8, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 0
ata1.00: configured for UDMA/133
scsi1 : sata_svw
ata2: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051011c
  Vendor: ATA       Model: WDC WD3200BEVT-0  Rev: 11.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
 sda: sda1
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
4608 kb/s
 - NAND PROBE: 2c da 80 95
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Unknown NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 7 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x0000000000000000-0x0000000010000000 : "complete"
0x0000000000000000-0x0000000000100000 : "loader"
0x0000000000100000-0x0000000000400000 : "boot partition"
0x0000000000400000-0x0000000004000000 : "root partition"
0x0000000004000000-0x0000000008000000 : "home partition"
0x0000000008000000-0x000000000f800000 : "unused partition"
0x000000000f800000-0x0000000010000000 : "preset partition"
ehci_hcd_brcm_init: Initializing 2 EHCI controller(s)
brcm-pm: enabling power to USB block
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
 - USB h/w setup mode <B>
 - USB power enable set for active LOW mode
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI
brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2
brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500
brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
usb 1-1: new high speed USB device using brcm-ehci and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480608
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4
usb 1-1: configuration #1 chosen from 1 choice
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-2: new high speed USB device using brcm-ehci and address 3
usb 1-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
isa bounce pool size: 16 pages
  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:1: Attached scsi removable disk sdc
sd 2:0:0:1: Attached scsi generic sg2 type 0
  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:2: Attached scsi removable disk sdd
sd 2:0:0:2: Attached scsi generic sg3 type 0
  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:3: Attached scsi removable disk sde
sd 2:0:0:3: Attached scsi generic sg4 type 0
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 152k freed
INIT: version 2.86 booting
stb_core: module license 'Proprietary' taints kernel.
FP Version 7
input: dreambox front panel as /class/input/input0
4013258 ms:
47 ms: 28 Starting /etc/rcS.d/S02sysfs...
11 ms: =s
Startting the hotplug events dispatcher
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
wlan: svn r3314
ath_hal: 2008-08-15 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, DFS, XR)
ath_pci: svn r3314
Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies
MadWifi: ath_getchannels: HAL returned 26 channels.
MadWifi: ath_getchannels: Channel   1 (2412 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   1 (2412 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   2 (2417 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   2 (2417 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   3 (2422 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   3 (2422 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   4 (2427 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   4 (2427 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   5 (2432 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   5 (2432 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   6 (2437 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   6 (2437 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   7 (2442 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   7 (2442 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   8 (2447 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   8 (2447 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   9 (2452 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   9 (2452 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  10 (2457 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  10 (2457 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  11 (2462 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  11 (2462 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  12 (2467 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  12 (2467 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  13 (2472 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  13 (2472 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_attach: Switching rfkill capability off
ath_rate_sample: 1.2 (svn r3314)
MadWifi: ath_attach: Switching per-packet transmit power control off
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
wifi0: ath_announce: Use hw queue 8 for CAB traffic
wifi0: ath_announce: Use hw queue 9 for beacons
ath_pci: wifi0: Atheros 2413: mem=0xd1000000, irq=33
done
3705 ms: 31 Starting /etc/rcS.d/S03udev...
10 ms: =s
15 ms: 34 Starting /etc/rcS.d/S04bootup...
7 ms: 10
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
827 ms: 12
18 ms: 14
20 ms: 15

/dev/sda:
 setting standby66 ms: 16
 to 120 (10 minutes)

/dev/sda:
 setting using_dma to 1 (on)
 HDIO_SET_DMA failed: Inappropriate ioctl for device
 HDIO_GET_DMA failed: Inappropriate ioctl for device

/dev/sda:
 setting xfermode to 66 (UltraDMA mode2)
 HDIO_DRIVE_CMD(setxfermode) failed: Invalid exchange

/dev/sda:
 setting acoustic management to 128
 acoustic      =75 ms: 17
 128 (128=quiet ... 254=fast)
input: dreambox remote control (native) as /class/input/input1
input: dreambox advanced remote control (native) as /class/input/input2
input: dreambox ir keyboard as /class/input/input3
input: dreambox ir mouse as /class/input/input4
fpga init
done OK 0
enter base init, xvd 20090807, vdc 20090807, rap 20090430, xpt 20090430
!!! kernMemSize: 158 MB
smca set muxes
smcb set muxes
smcc set muxes
SMCA: controller reset timed out
SMCB: controller reset timed out
maskffffffff
using fpga version 2a
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 03 to val fe
tsmux set tsports reg 03 to val fe
tsmux set cisource reg 00 to val 55
tsmux set cisource reg 00 to val 55
tsmux set cisource reg 01 to val 55
tsmux set cisource reg 01 to val 55
register adapter
register adapter
register adapter
register adapter
register adapter
HDMI: no device attached
set sb to 3(2)
set fb to 2(-1)
set input to 0
set fb to 2(-1)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
display 0 uses vbi path 1
display 1 uses vbi path 0
HDMI: hotplug handler!
HDMI: no device attached
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=34
set fb to 2(0)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
Write AVS: 00 00 00 00 00 00 00 03 00 00 00 00 00 00
Write AVS: 00 00 00 00 00 00 18 63 00 00 00 00 00 00
set sb to 3(2)
Write AVS: 40 40 00 00 00 00 00 03 00 02 00 00 00 ff
set sb to 3(2)
disable wss on display 0
disable wss on display 1
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
udevd-event[484]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a directory

HDMI: hotplug handler!
using 50.00Hz as MonitorRefreshRate
CPU 1 Unable to handle kernel paging request at virtual address 00000258, epc == c06bd1a4, ra == c06bd1a4
Oops[#1]:
Cpu 1
$ 0   : 00000000 10008b00 c09c0000 89aaae98
$ 4   : c09b8bb0 000018b6 ffffffff 10008b01
$ 8   : ffffffff 0000000a 00003cd6 0000002e
$12   : 803bb833 0000004c 00000001 00000000
$16   : c0970000 00000000 00000001 00000000
$20   : 00000001 00000000 00000001 80036c2c
$24   : 00000000 00000001
$28   : 88612000 88613d20 c0660000 c06bd1a4
Hi    : 000000ca
Lo    : 3d6fba00
epc   : c06bd1a4 BXVD_SetMonitorRefreshRate+0x34/0xb8 [bcm7400]     Tainted: P
ra    : c06bd1a4 BXVD_SetMonitorRefreshRate+0x34/0xb8 [bcm7400]
Status: 10008b03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000258
PrId  : 0002a042
Modules linked in: bcm7400 cu1216mk3 fb snd_pcm snd_page_alloc snd_timer snd alps_bsbe2 max4397 alps_bsbe1 stv0299 tu1216 dvb_core bcm4501 fpga alps_bsbe1_c01a bcm4506 lnb_ctrl dreambox_keyboard dreambox_rc2 wlan_scan_sta ath_rate_sample ath_pci ath_hal wlan lcd fp stb_core
Process b_event (pid: 469, threadinfo=88612000, task=89aaae98)
Stack : c0661af8 80036c50 c0745868 00000000 00000000 00000000 c09b0880 89936000
        c0745868 c06625bc 88613e58 00000032 00000000 00000000 ffffbefd ffffffff
        ffffffff ffffffff 00000000 c0742f00 8002a934 c066d564 899a2400 c082e0ec
        c082e15c c07371d4 897df380 897df480 897df480 00400000 00400230 00000000
        00000020 c0684bf0 8002a934 00100100 00200200 803560d4 00000000 897df380
        ...
Call Trace:
[<c06bd1a4>] BXVD_SetMonitorRefreshRate+0x34/0xb8 [bcm7400]
[<c06625bc>] bcm_video_mode_set+0x760/0xa54 [bcm7400]
[<c06582f4>] hdmi_hotplug_handler+0x118/0x168 [bcm7400]
[<c0668a14>] b_event_task+0x158/0x258 [bcm7400]
[<c0669744>] b_thread_entry+0x68/0x84 [bcm7400]
[<800081c4>] kernel_thread_helper+0x10/0x18


Code: 26043288  0040f809  240518b6 <8e230258> 24020001  1062000f  3c020022  34420015  3c03c074



__________________

This post has been edited 2 time(s), it was last edited by ² Bad °° Boy ²: 03.07.2010 12:25.

03.07.2010 12:23 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Wenn das auch mit einem original Image passiert, ohne, dass du ein config Backup einspielst oder sonstige Plugins, dann solltest du bei DMM eine RMA anfordern.

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 12:34 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

d.h. ich knalle nun mal auf beide nen orig? oder nur aufe 8k erstmal?
(fange mal mit der 8k an)

__________________

03.07.2010 12:36 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Erstmal auf die Box, von der das bootlog stammt. Nimm am besten ein aktuelles experimental.

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 12:44 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

äh ja, nun gut.. nich so schön das ergebniss...
image auf box gelegt: release-dm8000_2.8.4.nfi

neustart: box bleibt bei ca 15% kleben...

keine bildausgabe mehr am tv vorhanden...

__________________

This post has been edited 1 time(s), it was last edited by ² Bad °° Boy ²: 03.07.2010 12:46.

03.07.2010 12:45 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Kannst du nochmal ein bootlog zeigen?

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 12:47 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

schau ich gleich nochmal, imo nach 3tem boot wieder bild und läd durch, bin imo im setup wizard...

__________________

03.07.2010 12:50 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

ok zwischenbericht:

8k bootet durch mit release-dm8000_2.8.4.nfi im flash & eingeschalteter 8c

dennoch weiterhinn zugang zur 8c tot, wird aber im router richtig angezeigt mit richtiger ip.

soll ich dan n spasseshalber auch mal nen orig aufe 8c schieben und testen?

__________________

03.07.2010 14:29 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Probiere es mal, mir fällt ansonsten dazu im Moment nix ein. Mag auch an den 35° liegen die ich hier im WZ habe smile

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 14:36 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

huhu kodo, also zur info Augenzwinkern

hab mal den lowfat stick bemüht mit dem gemini 4.7 (fürde 8c) imo rennt alles, lasse nun mal einen dauerping voner 8k zur 8c rennen und warte mal ab ob die verbindung wieder abreist, denke mal grob eine std sollte ok sein wens dan noch leuft....

werde dan nochmals die 8k neu starten mit der 8c im netz und gemini 4.7, wen das nun auch geht, musses ja devinitiv daran liegen das 2mal gemini5 im netz ist ( fragen wieso weshalb, warum) kann ich nich beantworten is halt meines erachtens nach dann aber die einzige erklärung zu meim problem, wo dan meines erachtens nach gillt heruas zu finden wieso die sich gegenseitig "zerschiessen"...

__________________

03.07.2010 14:41 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Äh, versuch mal den hostname einer Box zu ändern.

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 14:43 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

*reusper* sorry i need more input Augenzwinkern
(meine damit wo genau mache ich das?)

gehe ich ggf. richtig in der annahme das du eventuell der meinung bist das es bei beiden images (gemini5 8c & 8k) der gleiche is, soweit ich mich richtig erinnere sind es ja so zimlich die selben oder?

und das eventuell das ein netzwerk problem intern auslöst?

EDIT:
nochmal rekapitulation:
du meinst doch bestimmt die änderung in verbindung dahingehend das sich auf beiden dan das gemini5 befindet oder?

__________________

This post has been edited 2 time(s), it was last edited by ² Bad °° Boy ²: 03.07.2010 14:51.

03.07.2010 14:48 ² Bad °° Boy ² is online Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Ich weiß jetzt nicht, wo bei OE1.6 Images der hostname gesetzt wird, versuch es mal in /etc/hostname. Wenn der Name da nicht drin steht, findest du da aber weitere Info. Vielleicht hast du einen Router, der mit 2 gleichen Hostnamen nicht klar kommt.

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 14:58 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
Pages (2): [1] 2 next » Tree Structure | Board Structure
Jump to:
Post New Thread Post Reply
i-have-a-dreambox.com | Dreambox - Support » ...::: Archiv - The Gemini Project (GP3, GP2 und GP) :::... » ...::: The Gemini Project 2 :::... » The Gemini Project DM8000 » komische probleme, bitte lesen

Privacy policy | Team | Suchen | Hilfe


Powered by Burning Board 2.3.6 © 2001-2003 WoltLab GbR