The Gemini Project 4.70 DM500plus



  • Danke fuer das neue image :)
    Nur das bug mit tuner+picon(reference)ist immer noch da.
    Es geht aber mit tuner+picon(name)

  • vielen dank für das neue image.
    diese frage hab ich schon bei dr version 4.6 gestellt und wurde mir leider nicht beantwortet, ist dieses image unicable fähig?


    schonmal danke für die info.


    grüsse bacione

  • Zitat

    Original von kalehrl


    How can this be possibly called new?


    here

    Zitat

    Original von mahrko

    Dieser Beitrag wurde 3 mal editiert, zum letzten Mal von Ryu's Frau : Heute, 11:25.

    IF YOU LIKE MY WORK, PLEASE BUY ME A CURRYWURST MIT POMMES UND KETCHUP!!

  • I tried this image with an 500+ and 4.1.0 on it and learned that I couldn't find the update button anywhere in the menu or the blue panel.


    I then tried to update it with
    cat /tmp/name_of_image > /dev/mtd/3
    as I read in one of the support forums but the box came up with 4.1.0 again.


    I then tried
    cat /tmp/name_of_image > /dev/mtd/0
    as I read in one of the support forums and, after the prompt came back, rebooted with "reboot". The box is only blinking now, an ethernet connection isn't recognized until I push the "stand-by" button.


    I'm now trying to find out the IP-Adr of the box - if there is one?


    Any chance to get it back to work - preferably with the new image? BTW: it has the extension .nfi. To setup a bootp and the like wouldn't be the problem if I knew the requirements (filename, etc.)


    Any help greatly appreciated, even if it's the address of a trusty JTAG-owner to send the box to.

    Irrtümer der Menschheit Nr. 148: Tatsächlich handelt es sich um eine 73 jährige Jungfrau.

    • Offizieller Beitrag

    @ bacione,


    Unicable wird nur bei E2 unterstützt


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert

  • Edit 05.01.10: Strange, es scheint doch einen BOOTP-Request zu geben, die Fritzbox behauptet per DHCP eine IP-Nummer verteilt zu haben - aber die MAC-Adresse ist jedesmal eine andere und nicht die, die unten auf der Box aufgeklebt ist (00:09:34 stimmt noch, dann kommt immer etwas anderes).


    telnet, ssh, ping auf die vergebene IP-Adresse bringt aber nichts.


    --- ursprüngliche Message -----


    Habe mir den Netzwerkverkehr angesehen: Es kommt kein bootp-request von der Hardwareadresse der Box.


    Scheint also nur noch eine Reparatur via JTAG möglich zu sein.


    :rot: Flashen mit cat image-name > /dev/mtd/0 wird also nicht empfohlen! :rot:

    Irrtümer der Menschheit Nr. 148: Tatsächlich handelt es sich um eine 73 jährige Jungfrau.

    2 Mal editiert, zuletzt von RogerRabbit ()

    • Offizieller Beitrag

    Bist du sicher das diese Anleitungen wo du gelesen hast auch für die DM500plus war? Das glaube ich nicht... :aufsmaul:


    Es gibt im alle fälle eine methode wo kein Risiko stellt:
    Flashen DM600 über Webinterface


    Diese Methode ist für die DM500plus auch einsetzbar, und schadet im alle fälle nicht das bestehende Image wenn es nicht klappen soll :face_with_rolling_eyes:


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert

  • Hallo hab da mal eine Frage undzwar hab ich auf meine DM500 auch das Gemini 4.7 draufgespielt!
    Und wollte gern wissen ob ich den Startkanal festlegen kann?
    Also den Kanal der als 1tes kommen soll wenn ich die Box einschalte!
    Hoffe ihr könnt mir da weiterhelfen.

    • Offizieller Beitrag

    Box über dem Menu neustarten wenn du auf dem programm bist wo es nach strom abschaltung wieder gestartet werden soll.


    E2 Box: TWO ~ ONE ~ DM8000 ~ DM7080 ~ DM7020HD~ DM9x0 ~ DM820 ~ DM800(SE(v2))~ DM52x ~ DM500HD(v2)~ DM7025(+)
    E1 Box: DM7020 ~ DM7000 ~ DM 5620 ~ DM600 ~ DM500+ ~ DM500 ~ TRIAX 272-S
    Image: OE2.5/OE2.6 Unst./GP4.2 ~ OE2.5 Unst./GP3.3 ~ OE2.2 Unst./GP3.3 ~ OE2.0 Exp./GP3.2 ~ iCVS/GP3 ~ Gemini 4.70
    Sonstiges: Logitech K600 ~ DM Tastatur ~ Box: DM100 ~ Router: Fritz!Box 7590 ~ Wlan Stick: Dream Multimedia ~ Server: ALIX.3D3 ~ BananaPI
    Satelliten: WaveFrontier T90
    23,5°E | 19,2°E | 16.0°E | 13,0°E | 10,0°E | 9,0°E | 7,0°E | 4,9°E | 3.0°E | 1.9°E | 0,8°W | 4,0°W | 5,0°W | 8,0°W | 12,5°W | 15,0°W | 22,0°W | 24,5°W | 30.0°W


    Hilfe gesucht ? schau mal ins Gemini Project WIKI, auch unsere Video Tutorial sind für den Einstieg sehr empfehlenswert