I am just starting to try this new image, unfortunately no way to boot after the flash (using DreamUp 1.3.3.4).
Back to the version 4.50 (using the same procedure) all is working nice again.
Someone can help sort out this issue. Thanks.
No boot after flashing GP4.60/DM600PVR
-
-
Zitat
Originally posted by tapai
I am just starting to try this new image, unfortunately no way to boot after the flash (using DreamUp 1.3.3.4).
Back to the version 4.50 (using the same procedure) all is working nice again.
Someone can help sort out this issue. Thanks.yes 4.60 problem...
-
I had absolutely no problems.
Try flashing, just using the Serial-Null-Modem-Cable an don't use old settings.
This should work now.
Good Luck an have a nice "second" Christmas Day.
Jacques
Luxembourg
-
No problems here either.
I flashed the image using network cable and web browser however.
I suggest you have another go. The new image is running very smooth here.
Kind Regards
Azam -
Heh,
Problems is at bootloader #66 which is used at news images for DM600.
When your box not booting and see only red+green lighting you have probably CLONE...Here is original release for DM600 with bootloader #66
http://dreamboxupdate.com/open…ages/release_20081024.nfiWhen have any problems you must contact your seller for support your box!
-
Hello,
Sorry no Clonebox -Support in this forum....
This forum and our Image is only for original Dreambox development!!!For Cloneboxes please use a another Image and use a Forum for Your Boxtype!!!
We don't use and test Cloneboxes, so no support for this boxes and we don't want to hear you cry when your box has crashed with a Gemini-Image like the DB500er for a long TimePS: we do not control the Drivers or Image for "Timebombs" from DMM drivers or Bootloaders....
-
I have a orginal dm 600 and the same thing happen to me as well, green and read light solid after flashìng. So it`s something very wrong with this image, or something very wrong with the box. 4.5 version work ok.
fobronco
-
Hi,
good newz.
so bootloader 70 for 800HD and Bootloader 66 for 600 are anti clone
-
Zitat
Original von lemrid
so bootloader 70 for 800HD and Bootloader 66 for 600 are anti cloneI or better, we do not Know this???
I write the posting only as Answer of the Posting from "Bruty"....So have understand with my bad english, his answer for Clonesupport
-
Same problem here, only red+green lights are burning. back to 4.50 works fine. Is this really only happening at clone boxes? If yes, I have one...
-
Happens to original boxes as well. Happen to my box, and it`s original!
Have tried every thing, noting works, back to 4.5!
-
Has some one tried to flash latest SVCS or GP 4.5 and then make a Factory reset ( Werkseinstellungen ) and then flash the 4.60 again ?
Regards Bughunter
-
-use the DreamUp (1.3.3.1) with serial
-checked that the use network box is untickedflight707
-
I've flashed with latest dreamup through serial and it gives the same problems. Flashing back to 4.5 works fine. Same with the SVCS image. I think it is an error in the image then since even the serial flash isn't working for 4.6. Can the image makers check this?
-
i have the same problem
-
Today I flashed my DM600PVR with GP4.60 with DreamUP 1.3.3.4 and use network to flash.
No problem. All working perfect.
-
i have a problem 4.6 not work my box
-
Now i hope that the gemini team can show us a way how to fix this since it is said that its not a bomb but why isn't it working then?
-
here the same problem too, i have installed the 4.5 image again
-
Firt start with the new bootloader is working slow, my box was about half a minute standing there with the green and red LED...
Perhaps you should take some time to flash a box...
The Image is working fine...