i-have-a-dreambox.com | Dreambox - Support

Register Calendar Members List Team Members Galerie to Portal Go to the Main Page

Boardrules Frequently Asked Questions Statistik Statistik Search Pinwand Dreambox Blog Ihad/Gemini Fan-Shop
i-have-a-dreambox.com | Dreambox - Support » ...::: Internationale Corner :::... » English Corner » DreamBox 800 EPG e2_loadEPG » Hello Guest [Login|Register]
Last Post | First Unread Post Print Page | Add Thread to Favorites
Post New Thread Post Reply
Go to the bottom of this page DreamBox 800 EPG e2_loadEPG
Author
Post « Previous Thread | Next Thread »
tomcoleman tomcoleman is a male
Newbie


Registration Date: 13.10.2008
Posts: 24
Which box: DM 800S
External Storage: USB-Stick
Which Image: Gemini
Welcher Bildschirm: Samsung series 9
Origin: London

DreamBox 800 EPG e2_loadEPG Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

I have installed e2_loadEPG

it went off to the website and downloaded the channel information and SID information

But when i start my dreambox and push info on a channel it then hit yellow button "single EPG" there is no EPG that i just installed displayed?


Any ideas?

Does any one know of a SKy look a like EPG for the 800 - Searching these forums the E2_loadEPG seems to be the best one?!?

__________________
DREAMBOX 800 UK
14.10.2008 12:41 tomcoleman is offline Send an Email to tomcoleman Search for Posts by tomcoleman Add tomcoleman to your Buddy List
Zodac Zodac is a male
V.I.P.


images/avatars/avatar-2405.gif

Registration Date: 24.12.2006
Posts: 1,500
Which box: DM 8000HD
External Storage: USB-Stick; HDD
Which accessories: MacMini, PS3, Wii
Which Image: iCVS
Welcher Bildschirm: Sony KDL 40W4000
Origin: BaWü, Germany

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Not only the best one - the only one.

Here you'll find everything you need to install it properly on your DM 800...
E2_LOADEPG ver. 0.40 (modular version: SkyItalia + BSkyB)

Greets
Zodac
14.10.2008 12:53 Zodac is offline Search for Posts by Zodac Add Zodac to your Buddy List
tomcoleman tomcoleman is a male
Newbie


Registration Date: 13.10.2008
Posts: 24
Which box: DM 800S
External Storage: USB-Stick
Which Image: Gemini
Welcher Bildschirm: Samsung series 9
Origin: London

Thread Starter Thread Started by tomcoleman
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

yea thats the guide i used.

After i ran e2_loadepg.py it went through and ran and downloaded all the EPG information.

My question is why isnt it displaying on the DreamBox do i need to edit something???

__________________
DREAMBOX 800 UK
14.10.2008 13:20 tomcoleman is offline Send an Email to tomcoleman Search for Posts by tomcoleman Add tomcoleman to your Buddy List
Zodac Zodac is a male
V.I.P.


images/avatars/avatar-2405.gif

Registration Date: 24.12.2006
Posts: 1,500
Which box: DM 8000HD
External Storage: USB-Stick; HDD
Which accessories: MacMini, PS3, Wii
Which Image: iCVS
Welcher Bildschirm: Sony KDL 40W4000
Origin: BaWü, Germany

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Did you edit the enigma2.sh?

And did you activate to save the EPG data on the usb/hdd ... or wherever you store the EPG data?

Greets
Zodac
14.10.2008 14:54 Zodac is offline Search for Posts by Zodac Add Zodac to your Buddy List
tomcoleman tomcoleman is a male
Newbie


Registration Date: 13.10.2008
Posts: 24
Which box: DM 800S
External Storage: USB-Stick
Which Image: Gemini
Welcher Bildschirm: Samsung series 9
Origin: London

Thread Starter Thread Started by tomcoleman
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

i did edit the e2_loadepg.py

here is my file:

code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
214:
215:
216:
217:
218:
219:
220:
221:
222:
223:
224:
225:
226:
227:
228:
229:
230:
231:
232:
233:
234:
235:
236:
237:
238:
239:
240:
241:
242:
243:
244:
245:
246:
247:
248:
249:
250:
251:
252:
253:
254:
255:
256:
257:
258:
259:
260:
261:
262:
263:
264:
265:
266:
267:
268:
269:
270:
271:
272:
273:
274:
275:
276:
277:
278:
279:
280:
281:
282:
283:
284:
285:
286:
287:
288:
289:
290:
291:
292:
293:
294:
295:
#!/usr/bin/python
# e2_loadepg.py  by Ambrosa http://www.dreamboxonline.com

__author__ = "ambrosa http://www.dreamboxonline.com"
__version__ = "0.40 beta"
__copyright__ = "Copyright (C) 2008 Alessandro Ambrosini"
__license__ = "CreativeCommons by-nc-sa http://creativecommons.org/licenses/by-nc-sa/3.0/"

import gc
import os
import sys
import time
import string
import struct
import ConfigParser
from datetime import datetime

from e2_coremod import epgdat
from e2_coremod import webif
from e2_coremod import stuff



# ***********************************************************
# **                       CONSTANT                        **
# ***********************************************************


# installation directories
CONF_INSTALLDIRS=['/media/usb/e2_loadepg/','/media/hdd/e2_loadepg/']

# main configuration filename
CONF_FILENAME="e2_loadepg.conf"

# download modules location
DLMODDIR='dl_modules'

# caching dir
CACHEDIR='cache'

# OS RESTART GUI COMMAND (no more used since ver. 0.20)
#RESTART_GUI_COMMAND='killall -HUP enigma2 2>/dev/null'


# three-chars field separator user for cached files and data into 
FIELD_SEPARATOR="###"


# ***********************************************************

# ***********************************************************
# **                      FUNCTION                         **
# ***********************************************************


    
# check configuration file
def check_conf_file(cd,n):
    for f in cd:
        if os.path.exists(os.path.join(f, n)):
             return f
    
    print "ERROR ! NOT FOUND " + n + " (not in " + str(cd) + " )"
    print "ABORTING"
    return None




# ***********************************************************


# ***********************************************************
# **                      MAIN CODE                        **
# ***********************************************************

# used for total elapsed time
START_TIME=int(time.time())
   
# install dir ?
INSTALLDIR=check_conf_file(CONF_INSTALLDIRS,CONF_FILENAME)
if INSTALLDIR == None :
    sys.exit(10)


# set Garbage Collector to do a "generational jump" more frequently than default 700
# memory saving: about 50% (!!), some performance loss (obviously)
gc.set_threshold(50,10,10)

# increase this process niceness (other processes have priority)
os.nice(10)

# ***********************************************************
# ** get configuration options **

config=ConfigParser.ConfigParser()
config.read(os.path.join(INSTALLDIR,CONF_FILENAME))

CONF_LOG_VIDEO=config.getint("e2_loadpeg","LOG_VIDEO")
CONF_LOG_FILE=config.getint("e2_loadpeg","LOG_FILE")
# initialize log class
logging=stuff.logging_class(CONF_LOG_VIDEO,CONF_LOG_FILE,INSTALLDIR)
log=logging.log


log("E2_LOADEPG by " + __author__ + " , ver. " + __version__)
log("License: " + __license__)
log(__copyright__)

CONF_USE_WEBIF=config.getint("e2_loadpeg","USE_WEBIF")
CONF_RESTART_GUI=config.getint("e2_loadpeg","RESTART_GUI")
CONF_STANDBY_AFTER_RESTART=config.getint("e2_loadpeg","STANDBY_AFTER_RESTART")

CONF_EXSID=config.get("e2_loadpeg","EXSID")

CONF_CACHEDIR=os.path.join(INSTALLDIR,CACHEDIR)

CONF_LAMEDB=config.get("e2_loadpeg","LAMEDB")

CONF_EPGDAT=config.get("e2_loadpeg","EPGDAT")

CONF_LITTLE_ENDIAN=config.getint("e2_loadpeg","LITTLE_ENDIAN")
LB_ENDIAN='<'  # used by struct.pack() , '<' means LITTLE_ENDIAN
if CONF_LITTLE_ENDIAN == 0 :
    LB_ENDIAN='>'  # used by struct.pack() , '>' means BIG_ENDIAN


CONF_DL_MODULES=string.split(config.get("e2_loadpeg","DOWNLOAD_MODULES"),",")

CONF_DLMODDIR=os.path.join(INSTALLDIR,DLMODDIR)
log("OK, parsed \'" + CONF_FILENAME + "\' in \'" + INSTALLDIR+"\'")

#CONF_PARALLEL_DOWNLOAD=config.getint("e2_loadpeg","PARALLEL_DOWNLOAD")

# ***********************************************************
# ** cleanup old tmp files **

    
if os.path.exists(CONF_EPGDAT):
    log("Removing old "+CONF_EPGDAT)
    os.unlink(CONF_EPGDAT)


# ***********************************************************
# ** read excluded_sid.conf file **
if not os.path.exists(os.path.join(INSTALLDIR,CONF_EXSID)):
    log("ERROR ! \'" + CONF_EXSID + "\' NOT FOUND");
    sys.exit(10)
   
log("Reading \'" + CONF_EXSID+"\'")
config=ConfigParser.RawConfigParser()
config.read(os.path.join(INSTALLDIR,CONF_EXSID))
temp=config.items("excluded_sid");
exsidlist=[]

# create a list with sids
for i in temp:
    sid=str.strip(i[0]) + ":" + str.strip(i[1])
    exsidlist.append(sid)


# *********************************************************** 
# ** create caching dir if not exist **
if not os.path.exists(CONF_CACHEDIR):
    log("Create \'" + CONF_CACHEDIR + "\' directory for caching")
    os.mkdir(CONF_CACHEDIR)



# ***********************************************************
# ** removing old cached epg files **

# today date, format AAAAMMDD
TODAY=datetime.now().strftime("%Y%m%d")

log("Removing old cached files")
for cachedfile in os.listdir(CONF_CACHEDIR):
    # extract date from filename
    
    if string.split(cachedfile,FIELD_SEPARATOR)[-1] < TODAY :
        os.unlink(os.path.join(CONF_CACHEDIR,cachedfile))
        log("Deleting old cached file \'" + cachedfile + "\'")


# ***********************************************************
# ** INITIALIZE EPGDAT CLASS **


# epgdat_class(temp dir path ,lamedb file path, epg.dat file path )
epg=epgdat.epgdat_class(INSTALLDIR, CONF_LAMEDB, CONF_EPGDAT)
epg.set_log_function(log)
epg.set_endian(LB_ENDIAN)
epg.set_excludedsid(exsidlist)


# ***********************************************************
# ** fetching EPG DATA **

# run each download module


fetchdata_run=False
for i in CONF_DL_MODULES:
    if i != '':
        log("Read EPG DATA using module \""+i+"\"")    
        exec('import '+DLMODDIR+'.' + i)
        exec('fetchdata='+DLMODDIR+'.'+ i +'.download_and_cache(CONF_DLMODDIR,CONF_CACHEDIR,FIELD_SEPARATOR)')
        fetchdata.set_log_function(log)
        fetchdata.start()
        fetchdata_run=True

if fetchdata_run == True:
    # remove class for saving some memory
    del fetchdata



# ***********************************************************
# ** epg.dat creation ***

log("--------- End download ---------")
log("Starting creation \'" + CONF_EPGDAT+"\'");

total_events=0
group_events=0

previous_cn='!*!START_LOOP!*!'
real_cn='!*!START_LOOP!*!'
for f in sorted(os.listdir(CONF_CACHEDIR)):
            
    current_cn=string.lower(string.strip(string.split(f,FIELD_SEPARATOR)[1]))
    if current_cn != previous_cn:
        if previous_cn != '!*!START_LOOP!*!':
            epg.preprocess_events_channel(real_cn,real_provider)
                
        previous_cn=current_cn
    
    log("Reading \'"+f+"\'")
    # process events and insert them in event_dict
    fd=open(os.path.join(CONF_CACHEDIR,f),"r")
    events=fd.readlines()
    fd.close
    
    real_cn=string.split(events[0],FIELD_SEPARATOR)[0]
    real_provider=string.split(events[0],FIELD_SEPARATOR)[1]
    
    group_events=0
    for i in range(1,len(events)):
        total_events += 1
        group_events += 1
        event=events[i]
        
        event_starttime_unix_gmt=int(string.strip(string.split(event,FIELD_SEPARATOR)[0]))
        #event_starttime_notused=string.strip(string.split(event,FIELD_SEPARATOR)[1])) # not used
        event_title=string.strip(string.split(event,FIELD_SEPARATOR)[2])
        event_description=string.strip(string.split(event,FIELD_SEPARATOR)[3])

        epg.add_event(event_starttime_unix_gmt,event_title,event_description)
        


# process last group of files, if any
if group_events > 0:
    epg.preprocess_events_channel(real_cn,real_provider)

log("Processed "+str(total_events)+" events")


# create epg.dat
epg.final_process()


# ***********************************************************


# restart GUI
if CONF_USE_WEBIF == 1 and total_events>0 :
    if CONF_RESTART_GUI == 1 :
        log("Restarting ENIGMA2 GUI")
        webif.restartenigma()
    
        if CONF_STANDBY_AFTER_RESTART == 1:
            log("Wait Restart GUI to finish (120 seconds) .......")
            time.sleep(120)
            log("Switch to StandBy mode")
            webif.standby()


log("End processing, elapsed " + str(int(time.time()) - START_TIME) + " seconds")

sys.exit(0)

# **************** E N D ********************



The files are located in /media/usb/e2_loadepg/

The dat file is created in /media/cf/ext.epg.dat


quote:
Originally posted by kenatonline
quote:
Original von tomcoleman
ok i installed the e2_loadepg & edited the files for BSKYB
...
my next problem is i cant see anything when i hit yellow button and single EPG its as if the data is not being display or read just the normal EPG is there?????


Did you read the complete INSTALL.TXT?
You have to edit /usr/bin/enigma2.sh and insert the command to copy the
generated ext.epg.dat upon the saved epg.dat.
Why in enigma2.sh? Because enigma2 reads the epg.dat at start and then
DELETES the file. So the contents is available in RAM only. When enigma2
is shutdown regularly, it saves the epg.dat to /media/hdd/ (if hdd installed).
Due to this, the ext.epg.dat has to be copied BEFORE enigma2 starts.

Without the one-liner mentioned in INSTALL.TXT, the epg.dat will never
get updated with the generated ext.epg.dat and one will see exactly what
you described -> nothing.

These are my own experiences. Take them without any guarantee.

Regards


my dat file has been created and its stored in /media/cf/ext.epg.dat


My enigma.sh was set to this

code:
1:
2:
3:
[ -f /media/usb/ext.epg.dat ] && mv /media/usb/ext.epg.dat /media/hdd/gemini.epg.dat


I have now changed to this

code:
1:
2:
3:
[ -f /media/cf/ext.epg.dat ] && mv /media/cf/ext.epg.dat /media/hdd/gemini.epg.dat


This should copy the created one to that DIR

Do i need to rename any thing?

I have just looked in /media/hdd/ and its empty? - cant see gemini.epg.dat

__________________
DREAMBOX 800 UK

This post has been edited 1 time(s), it was last edited by tomcoleman: 14.10.2008 15:33.

14.10.2008 14:59 tomcoleman is offline Send an Email to tomcoleman Search for Posts by tomcoleman Add tomcoleman to your Buddy List
Zodac Zodac is a male
V.I.P.


images/avatars/avatar-2405.gif

Registration Date: 24.12.2006
Posts: 1,500
Which box: DM 8000HD
External Storage: USB-Stick; HDD
Which accessories: MacMini, PS3, Wii
Which Image: iCVS
Welcher Bildschirm: Sony KDL 40W4000
Origin: BaWü, Germany

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Hey,

first of all:
you have a DM 800? How can you use a Compact Flash Card in a DM 800?

And why are you using three different locations? cf, usb and hdd? Why not put everything on the same?!?!?

I have everything, the e2_loadepg tool, the ext.epg.dat and the gemini.epg.dat on an USB Stick mounted to /media/usb

And again:
Did you adjust in the Blue Panel of Gemini, that Epg data should be stored in gemini.epg.dat and in the right place (in your case, hdd)???


quote:

I have just looked in /media/hdd/ and its empty? - cant see gemini.epg.dat

This is because the file gets deleted as soon as Enigma has read it.


Another question:
Did you assign the Channel names of the bskyb-channel_list.conf to the real channel names in your lamedb?

You MUST do this ...

Example:

# 26 , ITV1 London
26=1,itv1 london,bskyb

In the thread you'll find my adjusted bskyb-channel_list.conf ... it should work perfectly with most of the channels. However, I deleted a few, because I don't need them (crap channels like Travel Channel, QVC etc.).

Greets
Zodac

This post has been edited 1 time(s), it was last edited by Zodac: 14.10.2008 17:08.

14.10.2008 17:06 Zodac is offline Search for Posts by Zodac Add Zodac to your Buddy List
Crusty Burke Crusty Burke is a male
Newbie


Registration Date: 05.06.2007
Posts: 35
Which box: DM7025S
External Storage: USB-Stick; HDD
Which Image: Gemini
Origin: Ireland

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

I have had a lot of problems with the EPG since we changed to GMT. In order to get e2_loadepg to recognise GMT rather than BST you have to edit the GMT Delta command in the Bskyb conf file.

I have set my GMT Delta = 0 yet the EPG times are still out by two hours. I have tried lots of different combinations, +2 hours, -2 hours, but the timings are still 2 hours out.

I'm running 0.44 version of e2_loadepg.

Has anyone got any advice on this?

This post has been edited 1 time(s), it was last edited by Crusty Burke: 10.11.2008 11:06.

10.11.2008 11:05 Crusty Burke is offline Send an Email to Crusty Burke Search for Posts by Crusty Burke Add Crusty Burke to your Buddy List
homeboy
Newbie


Registration Date: 22.01.2006
Posts: 4
Which box: DM 500S; DM 7025SS
External Storage: USB-Stick; HDD; CF; CIFS
Which accessories: Linksys NSLU2
Which Image: Gemini; PLi
Welcher Bildschirm: Sharp LC32BV8E
Origin: Nederland

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

I also had problems since DST ended. In my channel list the times were not correct. After I zapped to a BBC channel, the time changed and the program list was updated and corrected.

Now I've changed GMT_DELTA to 0 (it was GMT_DELTA=1), and everything seems to be fine. (I'm in the CET zone (Amsterdam, Paris)).

I deleted all *.pyc files and cleared the contents of the cache directory (/e2_loadepg/cache/) completely when changing GMT_DELTA.

This post has been edited 3 time(s), it was last edited by homeboy: 10.11.2008 15:44.

10.11.2008 14:56 homeboy is offline Send an Email to homeboy Search for Posts by homeboy Add homeboy to your Buddy List
pcd pcd is a male
V.I.P.


Registration Date: 31.08.2004
Posts: 3,647
Which box: siehe Signatur
External Storage: NFS
Which Image: Sonstige
Origin: UK

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@Zodac

Is there a patch to run E2_loadEPG with a CVS image ?

Regards, pcd.

__________________
Dm5620, Dm600pvr, Dm500HD, Xtreme and others.
10.11.2008 16:14 pcd is offline Send an Email to pcd Search for Posts by pcd Add pcd to your Buddy List
Zodac Zodac is a male
V.I.P.


images/avatars/avatar-2405.gif

Registration Date: 24.12.2006
Posts: 1,500
Which box: DM 8000HD
External Storage: USB-Stick; HDD
Which accessories: MacMini, PS3, Wii
Which Image: iCVS
Welcher Bildschirm: Sony KDL 40W4000
Origin: BaWü, Germany

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Why would you need a patch?

Greets
Zodac
10.11.2008 18:35 Zodac is offline Search for Posts by Zodac Add Zodac to your Buddy List
Crusty Burke Crusty Burke is a male
Newbie


Registration Date: 05.06.2007
Posts: 35
Which box: DM7025S
External Storage: USB-Stick; HDD
Which Image: Gemini
Origin: Ireland

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:
Originally posted by homeboy
I also had problems since DST ended. In my channel list the times were not correct. After I zapped to a BBC channel, the time changed and the program list was updated and corrected.

Now I've changed GMT_DELTA to 0 (it was GMT_DELTA=1), and everything seems to be fine. (I'm in the CET zone (Amsterdam, Paris)).

I deleted all *.pyc files and cleared the contents of the cache directory (/e2_loadepg/cache/) completely when changing GMT_DELTA.


Homeboy, thanks for that. I cleared out the cache directory as you suggested and it all works now! smile
10.11.2008 21:14 Crusty Burke is offline Send an Email to Crusty Burke Search for Posts by Crusty Burke Add Crusty Burke to your Buddy List
pcd pcd is a male
V.I.P.


Registration Date: 31.08.2004
Posts: 3,647
Which box: siehe Signatur
External Storage: NFS
Which Image: Sonstige
Origin: UK

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:
Originally posted by Zodac
Why would you need a patch?

Greets
Zodac


I am trying to make it work with a 600pvr E2 cvs image. The bskyb cache is received, /hdd/ext.epg.dat is made. Looks like /hdd/epg.dat is read by epgcache.cpp. But on the tv only the usual Now and Next appears. I have also activated MHW.

Has anybody used it with a cvs 800 or 7025 image ?

Regards, pcd.

__________________
Dm5620, Dm600pvr, Dm500HD, Xtreme and others.

This post has been edited 1 time(s), it was last edited by pcd: 10.11.2008 22:09.

10.11.2008 22:07 pcd is offline Send an Email to pcd Search for Posts by pcd Add pcd to your Buddy List
Zodac Zodac is a male
V.I.P.


images/avatars/avatar-2405.gif

Registration Date: 24.12.2006
Posts: 1,500
Which box: DM 8000HD
External Storage: USB-Stick; HDD
Which accessories: MacMini, PS3, Wii
Which Image: iCVS
Welcher Bildschirm: Sony KDL 40W4000
Origin: BaWü, Germany

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@pcd:
You need to make sure that the EPG is saved on your external storage device (eg. hdd, usb, cf or whatever you use).

In Gemini there is a setting for this - you need to check how & where to set this in your CVS image. But it should definately be possible.

THEN you need to make the adjustments to the enigma2.sh - see README file - and copy (or move) the ext.epg.dat over this epg storage file (in Gemini: e.g. /media/hdd/gemini.epg.dat).

Then reboot - and you should have EPG.

Greets
Zodac
11.11.2008 13:20 Zodac is offline Search for Posts by Zodac Add Zodac to your Buddy List
pcd pcd is a male
V.I.P.


Registration Date: 31.08.2004
Posts: 3,647
Which box: siehe Signatur
External Storage: NFS
Which Image: Sonstige
Origin: UK

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

It is working now with bskyb ! Many thanks ! danke

Do you know if there are channel_list_generator.py or channel_list.conf files for other European providers like the Nordic providers ?

Cheers, pcd.

__________________
Dm5620, Dm600pvr, Dm500HD, Xtreme and others.

This post has been edited 1 time(s), it was last edited by pcd: 11.11.2008 22:09.

11.11.2008 14:56 pcd is offline Send an Email to pcd Search for Posts by pcd Add pcd to your Buddy List
Zodac Zodac is a male
V.I.P.


images/avatars/avatar-2405.gif

Registration Date: 24.12.2006
Posts: 1,500
Which box: DM 8000HD
External Storage: USB-Stick; HDD
Which accessories: MacMini, PS3, Wii
Which Image: iCVS
Welcher Bildschirm: Sony KDL 40W4000
Origin: BaWü, Germany

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:

Do you know if there are channel_list_generator.py or channel_list.conf files for other European providers like the Nordic providers ?

None that I know of - sorry.

Greets
Zodac
12.11.2008 17:52 Zodac is offline Search for Posts by Zodac Add Zodac to your Buddy List
Tomerico Tomerico is a male
Newbie


Registration Date: 15.03.2009
Posts: 1
Which box: DM 500S
External Storage: HDD
Which Image: PLi

EPG data online Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Hi,
Can I get the epg data online? what I mean is I want to play my own subtitles, and I'm using Drtic. for that to work properly I want a way to get the program's name "online" so I can go and fetch the correct subtilite for it.
what is the coorect way of doing it?

thanks

Tom
15.03.2009 13:28 Tomerico is offline Send an Email to Tomerico Search for Posts by Tomerico Add Tomerico to your Buddy List
idreamsat idreamsat is a male
V.I.P.


images/avatars/avatar-5909.gif

Registration Date: 09.06.2005
Posts: 550
Which box: DM 8000HD
External Storage: HDD
Which accessories: USB - CF - HDD
Which Image: Gemini
Welcher Bildschirm: Sony Bavaria XBR
Origin: NW, US

RE: EPG data online Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@Zodac. any possibility on adding support for North American Providers EPG. as Dishnetwork, and Bell of Canada. EPG data is available from services like Zap2it and many others.

__________________
Admin: ihadna - The North American Support Board for The Gemini Project
SAY NO TO CLONES - Sagen Sie Nein zu Klone.
15.03.2009 14:44 idreamsat is offline Send an Email to idreamsat Homepage of idreamsat Search for Posts by idreamsat Add idreamsat to your Buddy List
Zodac Zodac is a male
V.I.P.


images/avatars/avatar-2405.gif

Registration Date: 24.12.2006
Posts: 1,500
Which box: DM 8000HD
External Storage: USB-Stick; HDD
Which accessories: MacMini, PS3, Wii
Which Image: iCVS
Welcher Bildschirm: Sony KDL 40W4000
Origin: BaWü, Germany

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

@idreamsat:
It definately is possible - but you have to contact the developer of this tool and ask him to implement it.

Greets
Zodac
15.03.2009 18:16 Zodac is offline Search for Posts by Zodac Add Zodac to your Buddy List
pcd pcd is a male
V.I.P.


Registration Date: 31.08.2004
Posts: 3,647
Which box: siehe Signatur
External Storage: NFS
Which Image: Sonstige
Origin: UK

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Also, if you know the urls to get the epg in xml form - I can try to do the e2_loadepg files for those providers. smile

__________________
Dm5620, Dm600pvr, Dm500HD, Xtreme and others.
16.03.2009 02:55 pcd is offline Send an Email to pcd Search for Posts by pcd Add pcd to your Buddy List
idreamsat idreamsat is a male
V.I.P.


images/avatars/avatar-5909.gif

Registration Date: 09.06.2005
Posts: 550
Which box: DM 8000HD
External Storage: HDD
Which accessories: USB - CF - HDD
Which Image: Gemini
Welcher Bildschirm: Sony Bavaria XBR
Origin: NW, US

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:
Originally posted by pcd
Also, if you know the urls to get the epg in xml form - I can try to do the e2_loadepg files for those providers. smile


I haven't checked load epg myself, and I think I will today, anyway, the url is http://labs.zap2it.com/

__________________
Admin: ihadna - The North American Support Board for The Gemini Project
SAY NO TO CLONES - Sagen Sie Nein zu Klone.
16.03.2009 13:30 idreamsat is offline Send an Email to idreamsat Homepage of idreamsat Search for Posts by idreamsat Add idreamsat to your Buddy List
Tree Structure | Board Structure
Jump to:
Post New Thread Post Reply
i-have-a-dreambox.com | Dreambox - Support » ...::: Internationale Corner :::... » English Corner » DreamBox 800 EPG e2_loadEPG

Privacy policy | Team | Suchen | Hilfe


Powered by Burning Board 2.3.6 © 2001-2003 WoltLab GbR